Nauticam 86221 User manual

Current as of 2018-10-23

Instruction Manual for

M67 Flip Holder/Double Flip Holder for

MWL-1

PN# 86221, #86222

FOREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, we pride ourselves in the ability to recognize the

requirements of professional as well as amateur underwater

photographers and fulfill them through the innovative designs of our

products. We strive to achieve a high level of user-friendliness by

allowing stress-free installation and easy operation of all important

functions of the camera.

Please read this manual carefully before using the product, this will

maximize its performance as well as its lifetime.

WARRANTY

All NAUTICAM Products are warranted against any material and

manufacturing defects for two years from the date of purchase for

consumer use. This warranty only applies to products purchased from

authorized NAUTICAM dealers and does not extend beyond the original

retail purchaser.

To return your product for service, please contact your regional

authorized service center(s). Please note that this warranty only applies

when the product is purchased in the territory where the service center

is located.

NAUTICAM does not hold responsibility for damage, of any nature, to

any equipment used with and/or placed within our products.

NAUTICAM accepts no liability for any loss of captured images or the

inability to capture images even if it is due to the malfunctioning of our

products.

Unauthorized modifications and/or repairs of our products will

automatically

Press the lever and flip the holder to the side then remove the

locking ring from the flip holder.

Align the two positioning screws on the back of the holder with

the slots on the front of the port.

The position of the flip holder can be changed by relocating the

two screws in the threaded holes around holder.

Fasten the holder by screwing the locking ring into the thread

on the front of the port.

---Continue on next page---

INSTALL TO THE PORT

Press

Current as of 2018-10-23

---Continue from front page---

CHANGING THE MOUNTING RING

A M67 mounting ring is supplied for directly mounting MWL-1

on the flip holder.

Follow below instruction to exchange the Bayonet Mounting

Ring of MWL-1 to M67 Mounting Ring in order to be securely

Remove the 7x screws from the back of the lens.

Remove the bayonet mounting ring of MWL-1. Note that there

are 4x small black cylindrical positioning pins. All 4 pins should

be remain in the back of the lens

Locate the 4 small sockets of the M67 mounting ring. Align with

the positioning pins on the MWL-1 and place it on top.

Secure the mounting ring by tightening the 7x screws

Fastening the MWL-1 tightly on M67 flip holder or double flip

holder. Please refer to MWL-1 to adjusting the lens hood

position

Remark: All Nauticam product manual will be changed to e-manual in end of

2018. Please download corresponding product manuals on Nauticam.com

website, or contact us for e-manuals.

This manual suits for next models

Other Nauticam Camera Accessories manuals

Nauticam

Nauticam 19561 User manual

Nauticam

Nauticam NA-D7100 User manual

Nauticam

Nauticam 17954 User manual

Nauticam

Nauticam NA-EM5II User manual

Nauticam

Nauticam 83213 User manual

Nauticam

Nauticam NA-LX100II User manual

Nauticam

Nauticam M67 User manual

Nauticam

Nauticam SFE2860-F User manual

Nauticam

Nauticam C1635III-Z User manual

Nauticam

Nauticam NA-GH2 User manual

Nauticam

Nauticam NA-Z9 User manual

Nauticam

Nauticam Vacuum Valve II User manual

Nauticam

Nauticam NA-EM1X User manual

Nauticam

Nauticam CR1535-Z User manual

Nauticam

Nauticam NA-a1 User manual

Nauticam

Nauticam NA-LX7 User manual

Nauticam

Nauticam NA-G5XII User manual

Nauticam

Nauticam 18809 User manual

Nauticam

Nauticam NA-EM5 User manual

Nauticam

Nauticam NA - D780 User manual

Nauticam

Nauticam NA-DP4 User manual

Nauticam

Nauticam 36060 User manual

Nauticam

Nauticam SFE1224GM-Z User manual

Nauticam

Nauticam 26302 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions