Mylek MYTH01D User manual

www.hsdonline.co.uk

Manual for use with model numbers:

MYTH01D, MYTH02D, MYTH03D, MYTH04D

Digital Tubular

Heater

This item gets very hot: do not touch the tubular heater when it is

switched on. Do not cover the tubular heater as this will cause

overheating. Never place the tubular heater directly on the floor

without using the feet.

WARNING: Check the product before use: if the cord is damaged,

it must be replaced by the manufacturer if still under warranty,

or similar qualified person to avoid any hazards.

READ ALL INSTRUCTIONS PRIOR TO USE.

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 1

Introduction

General Information

Please read the entire instruction manual before using the

product and then save it for future reference. We reserve the right

for any errors in text or images and any necessary changes made

to technical data. If you have any questions concerning technical

problems please contact our Customer Services on 0800 091 3171.

www.hsdonline.co.uk

Contents

2. Introduction

3. Safety Instructions

4. Installing and Operating

5. Operation

6. Cleaning

6. Specifications and Technical Data

7. Environmental Responsibilities

7. Warranty

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 2

www.hsdonline.co.uk

Safety Instructions

General safety instructions for the Digital Tubular Heater:

Warning: Read all the instructions. Failure to comply

with the following instructions can lead to electric

shocks, fires or serious injury.

SAVE THESE INSTRUCTIONS.

The term “tubular heater” in the following text refers to your

mains operated unit.

1. Safety Regulations

During the first use the heater may emit a small amount of vapour which

is perfectly normal. The reason for this is the heating wire element is

coated with lubricant oil during the production process. This will stop

after approx. 5 minutes after the first use and is not a safety concern.

IT IS IMPORTANT ALL ELECTRICAL DEVICES ARE PLUGGED INTO

POWER THAT IS PROTECTED BY A SAFETY SWITCH.

•The tubular heater is not suitable for use outdoors.

• Do not submerge into water.

• Place in a safe place away from flammable objects.

• Do not place flammable liquids or gasses near the heater.

• Do not place the heater directly below the socket outlet.

• Do not let the power cord over hang or touch the tube.

• Keep out of reach of children and animals – product gets hot to touch.

• THE SURFACE OF THIS TUBULAR HEATER CAN STILL GET HOT. IT IS

THEREFORE RECOMMENDED THAT THE AGED, INFIRM, CHILDREN AND

ANIMALS ARE NOT LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER

UNLESS A SUITABLE GUARD IS FITTED.

• This is not a toy.

• Switch off appliance when not in use.

• Do not hold or carry the tubular heater by the cord.

• If using an extension cord it must be as short as possible and fully extended.

• Check heater regularly if using with a timer or any other device that switches

the tubular heater on or off automatically.

• This leaflet should be retained for instructions on use.

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 3

www.hsdonline.co.uk

2 . Safety Thermal Cut-out

The appliance is fitted with a thermal cut-out. Once the tubular heater has cooled

down it will re-set itself automatically.

3. Installing & Operating

the Digital Controlled Tubular Heater

•THE TUBE HEATERS MUST BE MOUNTED HORIZONTALLY NOT VERTICALLY.

Step 1.

•Install the support bracket to the tube heater as shown below using the fixings

supplied.

Step 2.

•Fix the tubular heater to your chosen position to the wall or floor.

Important:

•The heater should have the following distances from walls or between 2 heaters.

Floor Mounting Wall Mounting Distance between heaters

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 4

www.hsdonline.co.uk 5

Step 3. Operation

DIGITAL TUBULAR HEATER: Advanced digital display, with smart working mode,

touch button / screen display, thermal cut off, countdown timer and cyclically

timer.

A) Ensure the plug is plugged into the plug socket, the unit power light will

illuminate showing the symbol “- -“ which means the unit is in standby mode

and will not heat.

B) Press the “on/off – setup button” and the unit will display “00” meaning the

heater will operate heat continuously in normal mode with no timer settings.

C) Press the “on/off – setup” button once more and will display and “00” will

flash; you can choose how many hours you want the unit to operate in a 1-24

hour period by pressing the up or down arrow. When the set hours have

elapsed the unit will switch off.

D) Press the “on/off – setup” button once again and will display, and “00” will

flash. This feature lets you set the time in hours for when you want the unit to

switch on by pressing the up or down arrow, for example if you set to 4 hours

the unit will count down and switch on after 4 hours have elapsed and will

continuously give out heat until you switch the unit off.

E) Press the “on/off – setup” button once again and will display and “00” will

flash. This feature lets you set the timer to come on and off cyclically, this

means for example you choose 2 hours, the unit will operate for 2 hours and

switch off for two hours and repeat this process until you switch the unit off.

This feature is a great energy saving feature.

F) The heater is fitted with a safety device which will switch off the heater in case

of accidental overheating.

G) To reset the tube heater, turn off the heater switch and unplug for a few

minutes to allow the unit to cool down.

H) Makesure that any causes of overheating, such as obstructions, are removed

and plug the appliance in again and operate as normal.

I) Turn off and unplug the unit when not in use or during the warmer months or

when you are away from home for extended periods of time as a safety

precaution and as a energy saving function.

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 5

www.hsdonline.co.uk

4. Cleaning

•Ensure product is unplugged from the mains and left to completely cool down

before attempting to clean.

•Wipe with a soft damp cloth and then dry with a soft dry cloth. DO NOT use

abrasive cleaning powders, clothes or metal polishes on any part of the tubular

heater as this will cause damage.

5. Digital Tubular Heater Specifications

Model Electrical IP Product

No. Power Supply Rating Length

(mm)

MYTH01D 60W 220-240V, 50 Hz IP44 340mm

MYTH02D 120W 220-240V, 50 Hz IP44 640mm

MYTH03D 180W 220-240V, 50 Hz IP44 950mm

MYTH04D 240W 220-240V, 50 Hz IP44 1250mm

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 6

www.hsdonline.co.uk 7

Environmental Responsibilities

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste,

use separate collection facilities.

Contact your local council for information regarding the collection

systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous

substances can leak into the groundwater and get into the food chain damaging

your health and well-being.

When replacing old appliances with new ones, the retailer is legally obligated to

take back your old appliance for disposal free of charge.

SERVICE WARRANTY

Hygiene Supplies Direct guarantees the product free from defects in materials

and workmanship for a period of 1 year from date of purchase.

Should this unit be operated under conditions other than those recommended,

at voltages other than the voltage indicated on the unit, or any attempts made to

service or modify the unit, then the warranty will be rendered void. The product

you buy may sometimes differ slightly from illustrations. This warranty is in

addition to, and does not affect, your statutory rights.

If you have any problems with this product, please call our Help Desk

on 0800 091 3171 or email [email protected]

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 7

YESSS Electrical Ltd, Normanton, WF6 1TN declares that the Tubular Heater

is exclusively manufactured and imported for Hygiene Supplies Direct Ltd.

www.hsdonline.co.uk

MYTH01_2_3_4D,_Manual 12/4/21 14:15 Page 8

This manual suits for next models

Table of contents

Other Mylek Heater manuals

Mylek

Mylek MYTH01C Instruction manual

Mylek

Mylek MYC01-10A User manual

Mylek

Mylek MHPH05-10E User manual

Mylek

Mylek MY0210R User manual

Mylek

Mylek MYRA600W User manual

Mylek

Mylek MYHH0406C User manual

Mylek

Mylek SPH05-05R User manual

Mylek

Mylek MYSH0406E User manual

Mylek

Mylek MYBH1000 User manual

Mylek

Mylek MYOD606WH User manual

Mylek

Mylek MYH03-05E User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide