MyCharge 6000 User manual
Owner’s Manual
Portable Power
Bank 6000
™
2
Thanks for choosing myCharge.
In The Box
• myCharge Portable Power Bank 6000
• USB to Micro-USB Charging Cable
• Owner’s Manual
3
USB
Output
Micro-USB Apple 30-pin
Mini-USB
4
Quick Start
1. Unfold the appropriate built-in connector from its storage position and
connect it to the device you want to charge. You can also supply your own USB device
cable and connect it to the full-size USB port.
2. Move the function switch left into the on/charge position (green indicator) to begin charging. (Fig. 1)
3. When nished, move the function switch back into the off/sync position (red indicator) to
prevent unnecessary discharging.
Fig. 1
Level Check ButtonMicro USB Input
Function Switch
LED Indicators
5
Charging Power Bank
Please fully charge your Power Bank before using the rst time.
To charge, connect the included USB cable’s Micro-USB connector
to Power Bank’s charging port (Fig. 2) and the other end to the USB
wall adapter that came with the device you want to charge or a
computer. When connected, the LEDs on the side of the unit will
ash indicating that it is charging. Charge time for Power Bank
alone is about 3.5 hours from a standard 2.1A iPad® USB
wall adapter, or about 6.5 hours from a standard 1A iPod®/
iPhone® USB wall adapter. Note: USB wall adapters not included. Note: It is
normal for Power Bank to be warm to the touch while in use.
Fig. 2
6
Powering On and Off
To keep your Power Bank fully powered and ready to charge, keep the
function switch (Fig. 1) in the off/sync position when not in use. This deactivates all
connectors as well as the level check button so there is no unintentional drain on the battery. To
turn your Power Bank on, move the function switch left into the on/charge position (green indicator).
All connectors can now charge devices, and the level check button will report the current status.
Note: It is normal for Power Bank to be warm to the touch while in use.
Charging Devices
A Micro-USB, Mini-USB and Apple® connector are built-in to let you charge hundreds
of devices without the need for any additional adapters, as well as a full
size USB port for charging almost anything else.
7
To charge a device, connect it to the appropriate connector and move the
move the function switch left into the on/charge position (green indicator). To charge a device
with your own USB cable, connect the cable to your device and insert the USB connector into
Power Bank's full-size USB port. Power Bank is capable of charging up to 4 devices at the same time.
When Power Bank's internal battery is depleted beyond the ability to charge the connected devices, all
LEDs will ash for 30 seconds indicating it's time to connect a power source. Use a standard USB iPad
or iPod/iPhone wall adapter, or one that came with your device rated for 1A output or more. The
charge time of your Power Bank with devices attached will vary depending on the current
charge level of those devices and its internal battery.
8
Overload Protection
Power Bank enables you to charge multiple devices. Because devices
vary in their power requirements, it's possible to connect a group of devices that need
more than what Power Bank can supply. When this occurs, Power Bank implements overload
protection. LEDs will ash indicating which device cannot be charged because its power needs are
too great:
• Left 2 LEDs ash - A device connected to the Micro or Mini USB connector
• Middle 2 LEDs ash - A device connected to the USB port with your cable
• Right 2 LEDs ash - A device connected to the Apple connector
9
In the event of an overload, unplug the last device connected. To
manually reset, disconnect all devices, move the function switch to the off/sync position
and then back to on/charge before reconnecting devices in the priority order you prefer.
Syncing
Your iPod, iPhone or iPad can be synced to a computer while connected to Power Bank. Simply
connect Power Bank to your computer with the provided USB cable, move the function switch
to the off/sync position (right) and connect your device to the Apple connector. Note: Power
Bank does not support sync through the built-in Micro-USB or Mini-USB connectors.
10
Battery Indication
To check how much battery is left, make sure the function switch is in
the on/charge position (green indicator) and press the level check button on Power
Bank’s side. (Fig. 1).
• LED 1 is lit - 00-17% Power
• LED 2 is lit - 17-34% Power
• LED 3 is lit - 34-50% Power
• LED 4 is lit - 50-67% Power
• LED 5 is lit - 67-84% Power
• LED 6 is lit - 84-100% Power
Other manuals for 6000
2
Table of contents
Languages:
Other MyCharge Accessories manuals
MyCharge
MyCharge Hub 9000 User manual
MyCharge
MyCharge EnergyShot User manual
MyCharge
MyCharge Sojourn 1000 User manual
MyCharge
MyCharge POWERBRICK User manual
MyCharge
MyCharge Jolt 2000d User manual
MyCharge
MyCharge AMPxt 6000 User manual
MyCharge
MyCharge Summit 3000 User manual
MyCharge
MyCharge EasyNote TE User manual
MyCharge
MyCharge Trek 2000 User manual
MyCharge
MyCharge RAZORMAX User manual
