MuxLab 500449 User manual

HDMI 2.0 KVM HDBT Extender Kit, 100m

User Manual

500449

HDMI 2.0 KVM HDBT Extender Kit, 100m

Table of Contents

1. Safety Precautions....................................................................................................................................................3

2. Introduction................................................................................................................................................................4

3. Features.......................................................................................................................................................................4

4. Package Contents...................................................................................................................................................4

5. Specifications............................................................................................................................................................5

6. Operation Controls and Functions....................................................................................................................6

6.1. Transmitter Panel..............................................................................................................................................6

6.2. Receiver Panel..................................................................................................................................................7

7. IR Pin Definition.........................................................................................................................................................8

8. Application Diagram..............................................................................................................................................9

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.

Do not dismantle the housing or modify the module. It may result in electrical shock or

burns.

Do not open or remove the housing of the device as you may be exposed to dangerous

voltage or other hazards.

To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install

this product near water. Keep the product away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an

object or liquid falls or spills on the housing, unplug the module immediately.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

Using supplies or parts not meeting the product specifications may cause damage,

deterioration or malfunction.

Refer all servicing to qualified service personnel.

Install the device in a place with adequate ventilation to avoid damage caused by

overheat.

Unplug the power when left unused for a long period of time.

Information on disposal of devices: do not burn or mix with general household waste,

please treat them as normal electrical waste.

1. Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before

using the device. Save this manual for future reference.

All contents in this manual are copyrighted, and cannot be cloned, copied, or translated

without the express permission of MuxLab Inc. Product specifications and information in this

document are for reference only, and the content may be updated from time to time without

prior notice.

HDMI 2.0 KVM HDBT Extender Kit, 100m

HDMI 2.0b and HDCP 2.2 compliant

Supports 18Gbps video bandwidth

Supports video resolution up to 4K/60Hz (YUV 4:4:4)

Supports HDR, HDR10, HDR10+, Dolby Vision LLM and HLG pass through

Supports LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High

Res, DTS-HD Master Audio and DSD pass through

Supports 4K transmission distance up to 328ft/100m via a single CAT 6A/7 cable

Supports 1080P transmission distance up to 492ft/150m via a single CAT 6/6A/7 cable

Supports bidirectional POC (Power over Cable), when TX or RX gets power, the other end

does not need an external power supply

Supports 3.5mm analog audio de-embedding at TX and RX

Supports bi-directional RS-232 signal pass-through, bi-directional IR signal control, and

USB2.0 signal transmission

EDID management

3. Features

2. Introduction

The MuxLab HDMI 2.0 KVM HDBT Extender Kit, 100m (model: 500449) allows one HDMI

channel, one USB2.0 signal, one RS232 signal and one bi-directional IR signal to be

transmitted over distances of up to 328ft (100m) at 4K/60Hz (4:4:4) resolution via one (1) Cat

6a/7 unshielded twisted pair cable in a point-to-point configuration.

The MuxLab HDMI 2.0 KVM HDBT Extender Kit, 100m includes one (1) transmitter and one (1)

receiver. The Extender supports EDID management, bi-directional PoC function and can switch

between HDBT Standard Mode (as factory default) and HDBT Long Reach Mode. The

extender features, in both the Transmitter and Receiver, a 1x2 USB hub for transferring USB

data transmissions and analog audio port, used for audio de-embedding output.

One (1) HDBaseT 3.0 Extender (Transmitter)

One (1) HDBaseT 3.0 Extender (Receiver)

One (1) IR Blaster Cable (1.5 meters)

One (1) IR Receiver Cable (1.5 meters)

Two (2) 3pin-3.81mm Phoenix Connectors (Male)

Four (4) Mounting Ears

Eight (8) Machine Screws (KM3*4)

One (1) 24V/1A LockingPower Adapter

One (1) User manual (available via download)

4. Package Contents

Notes

：

Confirm that the product and accessories are all included. If not, please contact the

supplier from which you purchased the unit.

HDMI 2.0 KVM HDBT Extender Kit, 100m

5. Specifications

HDMI 2.0 KVM HDBT Extender Kit, 100m

HDMI Compliance HDMI 2.0b

HDCP 2.2

18Gbps

Up to 4K/60Hz

HDR, HDR10, HDR10+, Dolby Vision, HLG

8/10/12-bit

12Vp-p

Technical

HDCP Compliance

Video Bandwidth

Video Resolution

Color Space

Color Depth

IR Level

HDBT Standard Mode: 4K60/100m; 1080P/100m (CAT6A/7 cable)

Transmission Distance

RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0

HDR

Audio Formats LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24,

DTS High Res, DTS-HD Master Audio, DSD

Connection

Transmitter

1 x HDMI Input [Type A, 19-pin female]

1 x HDBaseT Output [RJ45 connector]

1 x L/R Output [3.5mm Stereo Mini-jack]

1 x IR Input [3.5mm Stereo Mini-jack]

1 x IR Output [3.5mm Stereo Mini-jack]

1 x RS-232 [3pin-3.81mm Phoenix jack]

1 x SERVICE [Micro USB, 5-pin female]

1 x USB HOST [USB Type B]

2 x USB DEVICES [USB Type A]

Input:

Outputs:

Controls

Receiver

Inputs:

Outputs:

Controls:

1 x HDBaseT Input [RJ45, 8-pin female]

1 x HDMI Output [Type A, 19-pin female]

1 x L/R Output [3.5mm Stereo Mini-jack]

1 x IR Input [3.5mm Stereo Mini-jack]

1 x IR Output [3.5mm Stereo Mini-jack]

1 x RS-232 [3pin-3.81mm Phoenix jack]

1 x SERVICE [Micro USB, 5-pin female]

2 x USB DEVICES [USB Type A]

Mechanical

Generic Specification

Housing Metal Enclosure

Color Black

Dimensions (WxDxH) Transmitter/Receiver: 144mm x 78mm x 23mm

Weight Transmitter: 323g, Receiver: 319g

Power Supply Input: AC 100 - 240V 50/60Hz

Power Consumption 14.28W (POC)

Operating Temperature 32 - 104°F / 0 - 40°C

Storage Temperature -4 - 140°F / -20 - 60°C

Relative Humidity 20~90% RH (non-condensing)

Compliance

Warranty

Order Information

Regulatory: FCC, CE, RoHS

2 years

500449 HDMI 2.0 KVM HDBT Extender Kit 100m (UPC:627699004494)

HDBT Long Reach Mode: 1080P/150m (CAT6/6A/7 cable)

Output: DC 24V/1A (US/EU standard, CE/FCC/UL certified)

6. Operation Controls and Functions

6.1 Transmitter Panel

Used to switch HDBT mode.

Switch to "STD": The HDBT Standard Mode (as factory default) is enabled, it

can extend 4K/60 signal between the transmitter and the receiver up to 100m

via a single CAT 6A/7 cable.

Switch to "LRM": The HDBT Long Reach Mode is enabled, it can extend 1080p

signal between the transmitter and the receiver up to 150m via a single

CAT6/6A/7 cable.

No Name Function Description

Red LED indicates that the Transmitter is powered on.Power LED

MODE Switch

HDMI 2.0 KVM HDBT Extender Kit, 100m

▪

Light on: Transmitter and Receiver are in good connection status.

▪

Light flashing: Transmitter and Receiver are in poor connection status or

connected to the same device.

▪

Light off: Transmitter and Receiver are not connected.

LINK LED

IR signal input port, connected to IR Receiver cable.

3IR IN

4IR OUT IR signal output port, connected to IR Blaster cable.

6EDID DIP Switch

Used for EDID setting:

00: Copy display’s EDID (as factory default)

01: 4K30 4:4:4

10: 1080p/60 4:4:4

11: 1200p/60 4:4:4

7SERVICE Firmware update port.

HDBaseT output port, connected to the HDBaseT IN port of Receiver with a

CAT6A/7 cable. It is used for various signals pass-through.

8HDBaseT OUT

9Data Signal Indicator

(Yellow)

▪

Illuminating: HDMI signal with HDCP.

▪

Flashing: HDMI signal without HDCP.

▪

Dark: No HDMI signal.

HDMI IN

13 USB DEVICES Two USB device ports, connected to USB disk, mouse or keyboard.

HDMI 2.0 KVM HDBT Extender Kit, 100m

6.2 Receiver Panel

▪

Illuminating: Transmitter and Receiver are in good connection status.

▪

Flashing: Transmitter and Receiver are in poor connection status or connected

to the same device.

▪

Dark: Transmitter and Receiver are not connected.

15 RS-232 RS-232 serial port, used for serial port command transmission.

Use the switch to turn on/off POC function.

17 POC Switch

Link Signal Indicator

(Green)

HDMI signal input port, connected to signal source device.

12 USB HOST USB extension host port, connected to PC.

14 L/R OUT Analog audio output port, used for audio de-embedding output.

DC 24V/1A power supply input port.

Note that the extender supports POC function, it means that either transmitter or

receiver is powered on by 24V/1A power adapter, the other one doesn’t need

power supply.

16 DC 24V

Firmware update port.

No Name Function Description

Red LED indicates that the Receiver is powered on.Power LED

SERVICE

▪

Light on: Transmitter and Receiver are in good connection status.

▪

Light flashing: Transmitter and Receiver are in poor connection status or

connected to the same device.

▪

Light off: Transmitter and Receiver are not connected.

LINK LED

IR signal input port, connected to IR Receiver cable.

3IR IN

4IR OUT IR signal output port, connected to IR Blaster cable.

HDBaseT input port, connected to the HDBaseT OUT port of Transmitter with a

CAT 6A/7 cable. It is used for various signals pass-through.

6HDBaseT IN

▪

Illuminating: HDMI signal with HDCP.

▪

Flashing: HDMI signal without HDCP.

▪

Dark: No HDMI signal.

7Data Signal Indicator

(Yellow)

HDMI OUT

11 L/R OUT Analog audio output port, used for audio de-embedding output.

HDMI 2.0 KVM HDBT Extender Kit, 100m

IR Receiver and Blaster pin’s definition as below:

7. IR Pin Definition

▪

Illuminating: Transmitter and Receiver are in good connection status.

▪

Flashing: Transmitter and Receiver are in poor connection status or connected

to the same device.

▪

Dark: Transmitter and Receiver are not connected.

13 DC 24V

Use the switch to turn on/off POC function.

14 POC Switch

Link Signal Indicator

(Green)

HDMI signal output port, connected to HDMI display device.

10 USB DEVICES Two USB device ports, connected to USB disk, mouse or keyboard.

12 RS-232 RS-232 serial port, used for serial port command transmission.

DC 24V/1A power supply input port.

Note that the extender supports POC function, it means that either transmitter or

receiver is powered on by 24V/1A power adapter, the other one doesn’t need

power supply.

Note: When the angle between the IR receiver and the remote control is ± 45°, the

transmission distance is 0-5 meters; when the angle between the IR receiver and the remote

control is ± 90°, the transmission distance is 0-8 meters.

HDMI 2.0 KVM HDBT Extender Kit, 100m

500449

2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:

514-905-0589 | Toll free: 1-877-689-5228 [email protected] |

[email protected] | www.muxlab.com

8. Application Diagram

HDMI 2.0 KVM HDBT Extender Kit, 100m

Table of contents

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ installation manual