MSA OptimAir 3000 User manual

D3055032MEE/00

OptimAir 3000 Hoods

[OptiHood Demi, OptiHood Full and OptiTop]

Instruction for Use

Инструкции за

употреба

Návod k použití

Használati utasítás

Пайдалану жөніндегі

нұсқаулар

Instrukcja

użytkowania

Instrucţiuni de utilizare

Руководство по

эксплуатации

Návod na použitie

Керівництво з

експлуатації

12.4.041-2001 12.4.041-89 12.4.041-2001 12.4.041-2001

......................................................7

......................................................12

......................................................17

......................................................22

......................................................27

......................................................32

......................................................37

......................................................42

......................................................47

......................................................52

OptiHood Demi

3a / 6a

3b / 6b

tiHood Full

8c8b

OptiTop

OptimAir 3000 Hoods

[OptiHood Demi, OptiHood Full and OptiTop]

TABLE OF CONTENTS

General Liability Information

Statutory warnings ...................................................................................................8

1. Approval Information............................................................................................8

2. Pre Use...................................................................................................................8

2.1 OptiHood Demi and Full.....................................................................................8

2.2 OptiTop ................................................................................................................8

3. Wearing..................................................................................................................9

3.1 OptiHood Demi (Fig.1 - 3)...................................................................................9

3.2 OptiHood Full (Fig. 4 - 6)....................................................................................9

3.3 OptiTop (Fig. 7 - 9) ..............................................................................................9

3.4 General.................................................................................................................9

4. Cleaning...............................................................................................................10

5. Spares and Accessories ....................................................................................10

Safety Advice

The OptimAir 3000 hoods are products supporting life and health!

•This manual must be carefully read, understood and followed by all

individuals who have or will have the responsibility for selecting, using,

servicing or maintaining this product.

•This manual contains instructions for the optimal use of the product as well

as important safety information.

•Before use, the acting persons have to decide in accordance with this

manual, whether the product is suitable for the intended application.

Liability Information

•The liability of MSA is excluded if the product is not used appropriately and

for the intended purpose.

•Choice and use are in the sole responsibility of the acting persons.

•The above corresponds to the terms and conditions of sale regarding the

warranty and liability of MSA. It does not alter them.

Statutory warnings

These instructions must be read in

conjunction with the OptimAir blower

and tester instructions, and in

combination with any of the head tops

described below provide protection to

EN 12941, OptiHood Demi and

OptiHood Full TH2, OptiTop TH3.

Hoods are designed for use by

competent personnel familiar with

workplace hazards and only in

conjunction with the OptimAir 3000

blower unit.

Do not use in atmospheres with

modified oxygen content [permissible

range 19 – 23 % see local regulation]

or if contamination levels are likely to

be immediately dangerous to health.

Do not use the equipment if the head

cap or air hose is damaged, check for

cracks splits and tears, which will

cause leakage.

Protection will only be obtained if the

unit is fitted correctly; hair, spectacle

side arms etc must not intrude into

the face seal.

Protection levels may be reduced if

wind speed exceeds 2 meters per

second and at very high work rates

pressure in the device may become

negative at peak inhalation flow. In

such event other forms of respiratory

protective should be considered.

1. Approval Information

All hoods approved to EN 12941, as

marked, via notified body BIA CE

0121

Helmet approved to EN 397, as

marked, via notified body Inspec CE

0194

Visor approved to EN 166, as

marked, via notified body Inspec CE

0194

2. Pre Use

2.1 OptiHood Demi and Full

Prior to first use the head harness

must be adjusted to fit by sliding the

nap strap clip to the appropriate snug

fit and the hose connection made.

2.2 OptiTop

Assemble hood to helmet & air

management ring (see sketches).

Then assemble connector to rear of

management ring trapping and

sealing hood to ring, finally tighten

clamp on hose with the correct

orientation between the hood and

blower unit.

Always check airflow from the blower

prior to use.

3. Wearing

3.1 OptiHood Demi (Fig.1 - 3)

Pull the face piece over the head so

that the visor is in front of the face

and arrange the elastic face seal

under the chin. If necessary adjust the

over head [1] and nape straps [2] for

a comfortable gapless fit between the

face and the hood, it must be ensured

that the elasticated edge of the hood

fits snugly against the skin particularly

down the sides of the face adjacent to

the ears.

3.2 OptiHood Full (Fig. 4 - 6)

Don the face piece as for the

OptiHood Demi then adjust the

drawstring for a comfortable snug but

not tight fit around the neck always

ensure that you can place your

fingers under the drawstring against

your throat without force or

discomfort.

3.3 OptiTop (Fig. 7 - 9)

Adjust the headband such that the

hood fits comfortably and adjust the

drawstring for a comfortable snug but

not tight fit around the neck always

ensure that you can place your

fingers under the drawstring against

your throat without force or

discomfort. The visor, eye protector,

conforms to EN 166:1995 and is only

suitable for the uses marked on the

lens. (see Table 1) If the lens

becomes scratched or damaged the

hood should be replaced. The helmet

system consists of a shell and

suspension which work together as a

unit conforming to EN 397:1995

(options as indicated on the helmet

and in Table 2) and must not be

modified. Place helmet on the head

and push down until comfortable

wearing height is reached. The

suspension size can be adjusted

between sizes 52 and 64 by turning

the knob. The Helmet provides limited

protection. It reduces the effect of

objects striking the top of the shell but

does not provide significant protection

against lateral impact. Avoid contact

with live wires. Do not place objects

between the suspension, shell or

wearers head.

3.4 General

Arrange the breathing tube so that it

trails freely down the back and is not

kinked or looped and cannot be

inadvertently pinched. After use do

not remove the face piece until clear

of the hazard zone. Remove the

hood, disconnecting hose and if

necessary use a moist rag to clean

and sanitise the face piece and hose.

Care should be taken to avoid

scratching the visor. Any damaged

components should be replaced.

4. Cleaning

The devices should be cleaned with

mild soap (no detergents) in

lukewarm water or approved sanitizer

and rinsed thoroughly in clean water.

Use only soft clean cloths to polish

the visor. Avoid skin infections by

regularly cleaning the helmet and

suspension. The air distribution

system should only be cleaned on the

outside. Ambient air-dry only.

5. Spares and Accessories

OptiHood Demi and Full are

disposable items without user

replaceable parts. It must be stored in

a cool and dark place, in the original

packaging. Spares for the OptiTop

are given in the table 1.

Table 1

Part No.

10051805 OptiHood Demi

10051806 OptiHood Full

10051807 OptiTop

10051809 Helmet Hood

10051808 Air supply ring & Helmet

B0262171 Helmet

B0262230 Harness

10053377 OptiTop Hose

10049631 OptiHosei

B0258213 Chinstrap (pkg of 10)

10000442 Towelettes

Other manuals for OptimAir 3000

This manual suits for next models

Table of contents

Languages:

Popular Safety Equipment manuals by other brands

Innova

Innova Xtirpa Instruction and safety manual

bolle SAFETY

bolle SAFETY B810 quick start guide

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual

Hiltron security

Hiltron security POWER8E Installation and use manual

Hatco

Hatco B-950P installation guide

Sitec

Sitec TX MATIC operating manual

TEUFELBERGER

TEUFELBERGER GRIP 12 Manufacturer's information and instructions for use

AMC

AMC 1022M Series instruction manual

Trinity

Trinity CASS S3 Assembly manual

CMC

CMC Helitack HotSeat quick guide

Force

Force P-35 instruction manual

ACM

ACM SAFETY D200 Instructions and warnings

Honeywell

Honeywell Miller H-Design DuraFlex User instruction manual

ROCK

ROCK P-451 AS user guide

Power first

Power first 2XYR7A Operating instructions and parts manual

SCHUBERTH

SCHUBERTH SHP 28-C manual

Trango

Trango CINCH user manual

Escape

Escape Escape Chair VOLT manual