MSA SavOx User manual

Other manuals for SavOx

1

Popular Safety Equipment manuals by other brands

Innova

Innova Xtirpa Instruction and safety manual

bolle SAFETY

bolle SAFETY B810 quick start guide

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual

Hiltron security

Hiltron security POWER8E Installation and use manual

Hatco

Hatco B-950P installation guide

Sitec

Sitec TX MATIC operating manual

TEUFELBERGER

TEUFELBERGER GRIP 12 Manufacturer's information and instructions for use

AMC

AMC 1022M Series instruction manual

Trinity

Trinity CASS S3 Assembly manual

CMC

CMC Helitack HotSeat quick guide

Force

Force P-35 instruction manual

ACM

ACM SAFETY D200 Instructions and warnings

Honeywell

Honeywell Miller H-Design DuraFlex User instruction manual

ROCK

ROCK P-451 AS user guide

Power first

Power first 2XYR7A Operating instructions and parts manual

SCHUBERTH

SCHUBERTH SHP 28-C manual

Trango

Trango CINCH user manual

Escape

Escape Escape Chair VOLT manual

Sav x Chemical Oxygen Self-Rescuer

Fast escape in case of hazardous concentrations of toxic gases or oxygen deficiency

MSA (Britain) Limited •Phone: +44 (0) 1698 573357 •info.gb@MSAsafety.com •www.MSAsafety.com

The Chemical Oxygen Self-Rescuer SavOx is a self-contained respiratory

protective escape device. It is ideal for all escape applications wherever toxic

gases, particles or oxygen deﬁciency must be expected suddenly.

With its small size and low weight the Sav x can be carried along constantly

on the person ensuring the escape set is always within hands reach.

Because every life has a purpose ...

Opening the C ntainer

•Push the locking lever in the direction

of the arrow until the seal breaks and

locking device falls oﬀ

Inserting the M uthpiece

•

Place mouthpiece into mouth with

ﬂange of mouthpiece between teeth

and lips

•Bite down on the two lugs

•Exhale into the device

(so the breathing bag is inﬂated)

N te: It might be necessary to unfold the

breathingbag by hand

Fitting the N se Clip

•Grasp nose clip by rubber pads,

pull nose pads apart and ﬁt them

onto nose

Rem ving and Fitting the G ggle

N te: Goggle is on the right side of the neck strap

•Grasp the goggle strap and pull to

remove the goggle from neck strap

•Fit the goggle

•Tighten goggle straps

Adjusting the Neck Strap

•Adjust neck strap (ensure that the

head is able to move freely)

Tying the Waist Belt

•Tie waist belt and tighten with a

bow

Rem ving the Device

•Grasp container cover with one hand

•Pull out the device by the neck strap

with the other hand

•Discard container cover

Activating the Device

•Grasp breathing tube at the mouthpiece

•Fully extend the breathing tube to

activate the starter (a drop in pull

resistance indicates the starter is initiated)

1

2

5

6

7

8

9

10

Sav x Chemical Oxygen Self-Rescuer

Class K30 S, EN13794

Because every life has a purpose ...

MSA (Britain) Limited •Phone: +44 (0) 1698 573357 •info.gb@MSAsafety.com •www.MSAsafety.com

ATTENTION: There is an ignition risk if this procedure

is not followed. The starter MUST be initiated at the

beginning of use when the device is donned.

Imp rtant N tice: Don the device in a standing position with the

device worn on the belt

i

!

D nning the Neck Strap

•Take oﬀ the protective helmet, if used

•Place the neck strap around the neck (do not

adjust neck strap!)

•Put the protective helmet on

N te: The valve of the bag must be visible on the front

of the bag

Detaching the Device

•Detach device from mouth piece

bung

3

4