Mountup MU0060 User manual

01 02 03

Upper Holder

Wall Plate Down Holders

x1 x2

Hardware Included

LM4-4

Philips

Screws

M4 x 30mm

Philips

Screws

M6 x 30mm

Philips

Screws

M8 x 30mm

x4 x4 x4

Spacers

L5mm

Washers

Ø6mm

M4-5-6

TV Screws / Washers

M-A M-B M-C M-G

Velcro Cable Ties ×3 Bubble Level ×1

INSTALLATION INSTRUCTION

Safety Caution

Must Check Before Getting Started

Installation Tools (Not Included)

Band

Tape

Screwdriver

Hammer

MAX:400mm/16"

MAX:

Unrestricted Max:

(40KG)

88LBS

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please

Philips

Screws

M4 x 40mm

Philips

Screws

M6 x 40mm

Philips

Screws

M8 x 40mm

x4 x4 x4

M-D M-E M-F

Thread screws by hand into the threaded holes on the back of your TV to select which screw

diameter fits your TV.

M6M4 M8

Step 1-2 Select TV screw length

(V1)

Please read this instruction carefully before installation.If you do not understand these instructions or have doubts

about the safety of the installation, assembly or use of this product, please contact us.

●This product is designed for use in drywall with / without wood stud. - DO NOT install into solid concrete wall.

●The wall must be capable of supporting five times the weight of the TV and mount combined.

● Incorrect installation may result in product damage or body injury.

Step 1-1

Select TV screw diameter

Horizontal × Vertical

Min: 100mm×100mm (4"×4")

Max: 400mm×Unrestricted (16"×Unrestricted)

Max:

(40KG)

88LBS

If you have any questions, please feel free to contact Customer Service via Amazon before returning.

CAUTION:

DO NOT install into concrete or brick.

DO NOT mount to patched areas/ drywall

seams/uneven walls.

Drywall must be of sound construction with

no water damage.

<16mm(5/8")

Drywall with / without wood studs

Hardware（Wall）

Nail 5/64 x 1 3/16 in

x23

Correct Correct

CorrectCorrect

Measure and note the width of the square

or rectangle formed from the VESA holes

pattern .

Step 2 Measure your TV pattern

2M2M

100mm ≈4in.

200mm ≈8in.

300mm ≈11 3/4in.

400mm≈16in.

Step 4 Wall plate installation (for drywall with /without stud)

Step 3 Attach the bracket

Product dimensions:

300mm/12”

100/4”

400mm/16”

200/8“

unrestricted

M-A

Use the shorter screws

M-B

M-C

Not for M8 screws

(b) For Round Back / Extra Space

(a) For Flat Back

Top of TV

M-D

Use the longer screws

M-F

M-E

Top of TV

M-G

Not for M8 screws

M-G

Washers

Spacers

Pay attention to the direction�

3 4

27mm /1.06”

Position the wall plate at your desired height and secure it with the all nails total 23pcs.

01 A

!Wall plate MUST be level

when securing the nails.�

x23

Alternate installing all the nail holes from side to side.�

LIFT

Step 5 Lift and hang TV with bracket onto wall bracket

Adding cables before hanging the TV onto wall plate.

Hang the TV by securing the Upper Holders 02 onto the wall plate.

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 