Motorola H720 User manual
1
2
1
congratulations
your headset
charge it
basics
pair & connect
calls
talk time
status light
status tones
tips & tricks
customize
problems?
Safety, Regulatory & Legal
Contents
2
3
4
5
6
8
9
10
12
13
14
15
17
2
3
Your Motorola H720 headset is designed for quick connections, clear calls, and
lasting comfort.
We’ve crammed all of the main features of your headset into this handy guide,
and in a matter of minutes we’ll show you just how easy your headset is to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the rst time, please read the important
Safety, Regulatory & Legal information at the back of this guide (page 17).
your headset
the important buttons and connectors
congratulations
Earhook
Charging Port
Volume Buttons
Call Button
Indicator Light
Boom
Microphone
4
5
let’s get you up and running
Note: Your battery is designed to last the life of your product. It should only be
removed by a recycling facility. Any attempt to remove or replace your battery
will damage your headset.
basicscharge it
a few essentials to get you started
turn it on & off
To turn on your headset, ip the boom to open (extended)
position.
To turn off your headset, ip the boom closed (folded under
the headset body).
wear it
Your headset comes ready for the right ear. Just open the
boom, ex the earhook and loop it over your ear.
Make sure the speaker aligns with your ear canal, and the
microphone is pointing towards your mouth.
Note: To use your headset with your left ear, see “change for
left ear use” on page 14.
6
7
connect and go
Turn off any Bluetooth devices previously paired with your headset.
Turn on the Bluetooth feature on your phone.
Turn on your headset (see page 5 for help).
The indicator light becomes steadily lit in blue.
Set your phone to search for Bluetooth devices.
Select Motorola H720 from the search results on your phone.
Select Ok or Yes to pair your headset with your phone.
Note: If prompted for the passkey, enter 0000.
When your headset successfully pairs with your phone, the indicator light rapidly
ashes blue and purple.
reconnect
After initially pairing and connecting your phone and headset, you don’t need to
do it again.
pair & connectpair & connect
For daily use, make sure your headset is turned on, and your phone’s Bluetooth
feature is on. Your headset and phone will connect automatically!
test your connection
Turn on your headset and put it on.
On your phone, dial a phone number and press the Call/Send key.
If your phone and headset are successfully connected, you hear ringing on the
headset.
8
9
talk timecalls
it’s good to talk
Note: Some features are phone/network dependent.
To
answer a call
ignore a call
make a voice dial call
redial last call
mute or unmute a call
end a call
answer or reject
second incoming call
Press the Call button.
Press and hold a Volume button until you hear a tone.
Press the Call button and wait for voice prompt.
Press and hold the Call button until you hear two tones.
Press both Volume buttons.
Press the Call button.
Use phone to answer/reject second call (follow your
phone’s instructions).
check your chat time
Press and hold both Volume buttons while not on a call.
To save battery power,turn off the headset when not using it.
If light shows…
red
purple
blue
less than 4 hours
between 4 to 7.5 hours
up to 8 hours
your talk time is…
10
11
status light
know your headset
when charging
If light shows…
red
purple
blue
charging (battery level less than 50% charge)
charging (battery level more than 50% charge)
fully charged
your headset is…
when operating
If light shows …
three blue ashes
steady blue
rapid blue /purple ashes
status light
quick blue ash
slow blue pulse
slow blue ash
powering on/off
in pairing/connect mode
connecting to your phone
your headset is
receiving or making a call
on a call
in standby (not on a call)
slow red ash
slow purple pulse
steady red
idle(not connected to a phone)
muting the call
trying to connect to your phone
quick red ash in a low battery state
Note:After 20 minutes on a call or of inactivity, the light stops ashing to conserve
power, but the headset remains on.
12
13
status tones
Your headset is …
powering on
powering off
receiving a call
in a low battery state
out of range of your phone
connected to your phone
an ascending tone
two descending tones
a ring tone
when you hear…
two short tones when pressing Volume button
high/low tones repeated every 60 seconds
no audio indications; deteriorating quality
hear what's happening
in call mute status
at maximum or mininmum volume
enabling call mute
disabling call mute
three ascending tones
two rapid ascending tones
two rapid descending tones
a low tone every 10 seconds
tips & tricks
To…
reset your headset
a few shortcuts
Caution:This action erases all pairing information
stored in your headset.
With the headset on, press and hold both Volume
buttons and Call button for 10 seconds until the
indicator light is steady blue.
14
15
customize
make some changes
change for left ear use
Open the boom and earhook and gently
lift top of the earhook up and off,flip the
headset over, and then hook bottom of the
earhook onto the lower hinge pin and lift
top of the earhook up and on to the upper
hingepin.
set volume button
Close the boom on your headset, press and
hold the Volume button you want to assign
as “volume up”, and then open the boom.
The light flashes blue three times. When
connected, it ashes blue and purple.
Ear hook Hinge pin
Volume keys
Indicator light
problems?
we’ve got solutions
My headset will not enter pairing mode
Make sure that any devices previously paired with the headset are turned off.
If the indicator light is not steadily lit in blue, turn off both the other device and
headset, wait 10 seconds, then turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the headset is now in pairing mode.
My phone doesn't nd my headset
Make sure the indicator light on your headset is on (lit in blue) and steady when
your phone is searching for devices.
My headset worked before but now it's not working
Make sure your phone is on and the Bluetooth feature is turned on in your phone.
If the Bluetooth feature was turned off or was turned on only temporarily, you may
need to restart the Bluetooth feature and pair your phone and headset again (see
“pair & connect” on page 6).
16
17
support
we’re here to help
If you have questions or need assistance, contact us at 1-877-MOTOBLU, or
visit us at www.motorola.com/Bluetoothsupport or www.motorola.com/
bluetoothconnect.
European Union Directives Conformance
Statement
Hereby, Motorola declares that this product is in compliance with:
• The essential requirements and other relevant provisions of
Directive 1999/5/EC
• All other relevant EU Directives
The above gives an example of a typical Product Approval Number.
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/
EC (to R&TTE Directive) at www.motorola.com/rtte. To nd your DoC, enter the
Product Approval Number from your product’s label in the “Search” bar on the
Web site.
Safety, Regulatory & Legal
Product
Approval
Number
Other manuals for H720
2
Table of contents
Other Motorola Headset manuals
Motorola
Motorola H605 - Headset - Over-the-ear User manual
Motorola
Motorola HS830 HANSFREE User manual
Motorola
Motorola Finiti HZ800 User manual
Motorola
Motorola HS820 - Headset - Over-the-ear User manual
Motorola
Motorola VERVE ONES ME Manual
Motorola
Motorola H780 - Headset - Over-the-ear User manual
Motorola
Motorola H500 User manual
Motorola
Motorola 0171970B02 User manual
Motorola
Motorola MOTOSTART HS815 User manual
Motorola
Motorola HK500 User manual
Motorola
Motorola H690 User manual
Motorola
Motorola H710 - Headset - Over-the-ear User manual
Motorola
Motorola T6NB2 User manual
Motorola
Motorola Command One User manual
Motorola
Motorola HS805 - Headset - Over-the-ear User manual
Motorola
Motorola H780 - Headset - Over-the-ear User manual
Motorola
Motorola HS830 HANSFREE User manual
Motorola
Motorola WHISPER User manual
Motorola
Motorola HK200 User manual
Motorola
Motorola BOOM User manual
