Motorola MC32N0 SERIES User manual

Four Slot Cradle

FEATURES

Installing an Optional microSD Card Charge the MC32N0

Single Slot Cradle

GETTING STARTED

QUICK START GUIDE

24hr*

Installing the Battery

Trigger

Stylus

Display

Scan Button

Keypad

Indicator LED Bar

Strap Lanyard

Trigger

Speaker

Headset Jack

Speaker

MC32N0-G

MC32N0-R

MC32N0-S

Scan Indicator

Scan Button

Display

Receiver

Indicator LED Bar

Scan Button

Keypad

Power

Microphone

Battery Release Button

Scan Button

Speaker

Stylus

Handstrap

Battery Release Button

Scan Button

MC32N0-S/R

Rotate Turret

1. On the MC32N0-R/S, loosen the

handstrap.

2. Align the top of the battery into the

battery compartment.

3. Rotate the bottom of the bottom

into the battery compartment.

4. Press the battery down until it

snaps into place.

5. On the MC32N0-R/S, tighten the

handstrap.

Back View Back View

MC32N0-R 1. Remove the SD card cover using

stylus.

2. Slide the SD card holder down to

unlock.

3. Lift the SD card holder.

4. Place the microSD card into the

contact area.

5. Close the SD card holder and slide

the SD card holder up to lock.

6. Replace the SD card cover and

ensure that it is installed properly.

Speaker

Stylus

Headphone Jack

Handstrap

1. Install battery adapter into

spare battery slot.

2. Install battery into adapter.

MC32N0 SERIES

It is recommended that this product be charged for 24 hours before the first use

to ensure that the internal battery is fully charged.

Motorola Solutions, Inc.

ERGONOMICSBATTERY REMOVAL DATA CAPTURE OPTIONS

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are

trademarks and registered trademarks of Motorola Trademark Holdings, LLC and are

used under license. All other trademarks are the property of their respective owners.

MN000215A01 Rev. A February 2014

Removing the Battery - MC32N0-R/S Removing the Battery - MC32N0-G

1. Power off the MC32N0.

2. Loosen the handstrap.

3. Push in the two Battery

Release buttons. The

battery ejects slightly.

4. Remove the battery

from the battery

compartment.

1. Power off the

MC32N0-G.

2. Push in the two Battery

Release buttons. The

battery ejects slightly.

3. Remove the battery

from the battery

compartment.

Optimum Body Posture

for High Scanning

AVOID REACHING

AVOID BENDING

Alternatete left and right hand

Optimum Body Posture

for Low Scanning

Taking breaks and task rotation recommendedAlternate left and right knees

AVOID EXTREME

WRIST ANGLES

Imager

Laser Scanner

1301 E. Algonquin Rd. Schaumburg, IL 60196-1078 , U.S.A.

MC32N0-G Scanning

MC32N0-S Scanning

MC32N0-R Scanning

Other manuals for MC32N0 SERIES

This manual suits for next models

Other Motorola Barcode Reader manuals

Motorola

Motorola SYMBOL LS9203i User manual

Motorola

Motorola MC92N0-G User manual

Motorola

Motorola Symbol LS4278 Installation and operation manual

Motorola

Motorola MC9190-NI User manual

Motorola

Motorola SYMBOL MT2000 Series User manual

Motorola

Motorola Symbol DS3407 User manual

Motorola

Motorola DS4800 Series User manual

Motorola

Motorola LS2208AP User manual

Motorola

Motorola Symbol LS2208 User manual

Motorola

Motorola DS9208 User manual

Motorola

Motorola Symbol DS6607 Installation and operation manual

Motorola

Motorola Symbol DS6878 Installation and operation manual

Motorola

Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK... Installation and operation manual

Motorola

Motorola Symbol DS3408 Installation and operation manual

Motorola

Motorola Symbol LS9208 Installation and operation manual

Motorola

Motorola SYMBOL DS3578 User manual

Motorola

Motorola SYMBOL MT2000 Series User manual

Motorola

Motorola RFD8500 User manual

Motorola

Motorola CS4070 User manual

Motorola

Motorola DS4208 User manual

Motorola

Motorola DS9208 Installation and operation manual

Motorola

Motorola MC17 Installation and operation manual

Motorola

Motorola HDT 401 Reference guide

Motorola

Motorola DS3508 User manual

Motorola MC32N0 SERIES User manual

Popular Barcode Reader manuals by other brands