Minka-Aire TRADITIONAL CONCEPT Guide

INSTRUCTION MANUAL WARRANTY CERTIFICATE

TRADITIONAL CONCEPT

Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws.

Minka-Aire®warrants to the original owner that this fan will be free from defects in material and workmanship for one

year from the date of purchase, excluding the motor. Minka-Aire®warrants to the original owner that the motor in this fan

shall be free from defects in material and workmanship for as long as the original purchaser owns the fan, and it remains in

the original installation.

This is a limited warranty. Minka-Aire's®only obligation under this limited warranty is to replace or repair, or refund the purchase price, in

Minka-Aire's®sole discretion without charge to the original owner, of the fan once Minka-Aire®confirms that the fan has a defect covered by this

limited warranty.

Call our customer service department at 1-800-307-3267 to obtain the name of the Minka-Aire®authorized dealer closest to your location, or

contact us through our web site, www.minkagroup.net and write to: Ask Mr. Minka if you have any questions or require further assistance.

To obtain warranty service, the owner should return the fan along with proof of purchase to a Minka-Aire®authorized dealer. The Minka-Aire®

authorized dealer shall then, at its sole discretion: repair the fan, replace the fan, refund the purchase price less the amount directly attributable to the

consumer's prior usage of the fan, or if necessary instruct the consumer to contact Minka-Aire®directly for warranty service. Minka-Aire®will be

responsible for the cost of any repair, or replacement for any warranty service provided by a Minka-Aire®authorized dealer for product under warranty.

You may also at your preference obtain warranty service by returning the fan directly to Minka-Aire®along with proof of purchase, your name and

return address, and a description of the claimed product defect. Pack carefully; damage sustained in return transit to Minka-Aire®will be the original

owner's responsibility. Original owner shall be responsible to pay all shipping charges. To obtain warranty service, you may return a fan that proves to

be defective during the warranty period to the following address:

Minka-Aire®- Warranty Service, 1151 W. Bradford Court, Corona, CA 92882

Date Purchased Store Purchased Model Number Serial Number

F593

This warranty shall not apply to fans which have been damaged in any way, including improper installation, damage as a result of the removal

of the fan from the origial installation, or damage in shipping. This warranty shall not apply to fans which have been subjected to use for which the

fan was not designed. The purchaser of the fan shall be responsible for any cost of removing the old fan, installing a new fan, or any other costs.

This limited warranty is in lieu of all other express warranties. This limited warranty excludes all incidental and consequential damages, and

Minka-Aire®shall not under any circumstances be liable for incidental or consequential damages. Some States do not allow the exclusion of or

limitation of incidental or consequential damages, so the foregoing limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. We encourage you to promptly

complete and return the enclosed warranty registration card. However, return of the warranty registration card is not a condition of this warranty.

CONTENTS

INSTALLING THE LIGHT KIT MOUNTING PLATE .....................

INSTALLING THE LIGHT PLATE..........................................................

INSTALLING THE LIGHT BULB AND GLASS SHADE .............

OPERATING THE REMOTE CONTROL/WALL CONTROL .....

CARE OF YOUR FAN.............................................................................

TROUBLESHOOTING...........................................................................

SPECIFICATIONS....................................................................................

SAFETY RULES............................................................................................

PACKAGE CONTENTS............................................................................

INSTALLING THE MOUNTING BRACKET.....................................

ELECTRICAL CONNECTIONS..............................................................

INSTALLING THE WALL TRANSMITTER.......................................

FINISHING THE INSTALLATION.......................................................

BLADE INSTALLATION..........................................................................

1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267

SAFETY RULES

1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.

2. Be cautious!

Be cautious!

Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.

3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a

do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the

floor and 18 inches from the tip of the blades to the wall.

5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support". Secure

the box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 50

pounds) Do not use a plastic box.

6. Caution:

Caution:

To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided with the fan.

7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).

8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.

9. Do not insert anything into the fan blades while the fan is operating.

10. Turn the fan off and wait for the blades to stop completely before proceeding with maintenance or cleaning. SUITABLE FOR USE IN

WET LOCATIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR

SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN

CONJUCTION WITH THE LOCK WASHERS PROVIDED WITH THE FAN. MOST OUTLET BOXES COMMONLY USED FOR FAN SUPPORT OF

LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING

THE FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.

TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, THIS FAN ONLY CAN USE UC7067RC SOLID-STATE SPEED CONTROL WITH UC9040T

WALL CONTROL ONLY.

NOTE:

The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may

occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be

supplied by the person(s) installing, caring for and operating the unit.

NOTE:

READ AND SAVE ALL INSTRUCTIONS!

1. Fan Blades (3)

2. Mounting bracket

3. Fan motor/housing ass'y

4. Blade support plates (3)

5. Light kit mounting plate

6. Light plate

7. Glass shade

8. Metal light cover (for optional use)

9a. Wall transmitter Incl. 2 mounting

screws and 3 wire nuts

9b. Wall plate w/2 mounting screws

10. Extra Wall Plate w/2 Mounting

screws

11. 100W Mini-Can halogen bulb

12. Balancing kit

A. Mounting hardware:

#10 x 1.5" Wood screws (2)

#8 x 3/4" Machine screws (2)

Lock washers (2)

4mm star washers (2)

Wire nuts (3)

Washers (2)

B. Blade attachment hardware:

3/16" x 12.3 mm Screws (10)

Rubber washers (10)

PACKAGE CONTENTS

Unpack your fan and check the contents. You should have the following items:

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE MOUNTING BRACKET

WARNING

WARNING:

All of the parts, hardware and components have been provided for your safety and the proper

installation of your new ceiling fan. The use of other parts, hardware or components not supplied by

Minka Aire®with the fan will void the Minka Aire®Warranty.

REMEMBER

to turn off the power. Follow the steps below to hang your fan properly:

Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided with the

outlet box. Make sure the bracket is tight and secured. (Fig. 1)

Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling mounting

bracket allowing it to hang freely. (Fig. 1)

FIG. 1

OUTLET BOX

MOTOR

MOUNTING BRACKET

WARNING:

To avoid possible electrical shock be sure electricity is

turned off at the main fuse or breaker box before wiring.

NOTE:

The Aire Control®System is equipped with a learning frequency

function which has 256 code combinations to prevent potential

interference from other remote units. The frequency on your Receiver

and Transmitter units have been preset at the factory. (Fig. 2) No

frequency change is necessary, should you desire to install another fan

within the same home or area with a seperate frequency code please see

the "frequency interference" troubleshooting section of this instruction

manual to learn how to change the frequency.

Step 1 Connect the fan supply (black) wire to the black household supply

wire as shown in Figure 3 & 4.

Step 2. Connect the neutral fan (white) wire to the white neutral

household wire.

Step 3 Connect the fan ground wire (green) to the household ground wire.

Step 4. After all splices are made, check to make sure there are no loose

strands. As an additional precaution we suggest to secure the plastic wire

connectors to the wires with electrical tape.

ELECTRICAL CONNECTIONS

This manual suits for next models

Table of contents

Other Minka-Aire Fan manuals

Minka-Aire

Minka-Aire Aviation F853 User manual

Minka-Aire

Minka-Aire DELANO II Guide

Minka-Aire

Minka-Aire DELANO F701L-PW Guide

Minka-Aire

Minka-Aire Gyrette F302 Guide

Minka-Aire

Minka-Aire Ultra F588-SP User manual

Minka-Aire

Minka-Aire Concept I Wet F476L-BNW User manual

Minka-Aire

Minka-Aire Delano User manual

Minka-Aire

Minka-Aire F580 User manual

Minka-Aire

Minka-Aire CONTRACTOR User manual

Minka-Aire

Minka-Aire F568 User manual

Minka-Aire

Minka-Aire Bolo Guide

Minka-Aire

Minka-Aire CONTRACTOR Series User manual

Minka-Aire

Minka-Aire Napoli User manual

Minka-Aire

Minka-Aire Traditional Gyro User manual

Minka-Aire

Minka-Aire Mesa F565 User manual

Minka-Aire

Minka-Aire High Sierra F612 User manual

Minka-Aire

Minka-Aire F702 User manual

Minka-Aire

Minka-Aire Cristafano User manual

Minka-Aire

Minka-Aire Gyro User manual

Minka-Aire

Minka-Aire F601 Acero User manual

Minka-Aire

Minka-Aire uchiwa Guide

Minka-Aire

Minka-Aire SUPRA 44 User manual

Minka-Aire

Minka-Aire GYRO WET Guide

Minka-Aire

Minka-Aire Volterra F702L User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual