miniBatt PowerGOO User manual
PowerGOO WIRELESS CHARGER
+ POWER BANK 6000 mAh
Please register online
www.miniBatt.com/register Qi-compatible
USER MANUAL miniBatt PowerGOO.indd 1 25/4/16 12:39
Thank you for purchasing a miniBatt charging station.
With this charger, you can charge any Qi-compatible device
like a smartphone or other low-power wireless charging receivers
without the hassle of untangling cables. Just place your smartphone
on the charging surface, and your smartphone starts charging.
Parts of the product are magnetic. Metallic materials may be
attracted to the charger. Do not place any credit card or other
magnetic storage media near the product, because info stored
on them may be erased.
Read this user manual carefully before using the product.
Also, read the user manual for the device that you connect to the
charger.
Qi is a global standard that makes wireless charging possible for
your device.With this a Qi-compatible device, you don´t need to
connect any cable to charge it.
Qi and Qi mark, are the trade marks of WPC.
This product applies for all Qi standard transmitter.
Thank you for selecting miniBatt products.
USER MANUAL miniBatt PowerGOO.indd 2 25/4/16 12:39
miniBatt PowerGOO is a stylish, 3-coil Wireless PowerBank charger
with a 6,000 mAh high-density battery to charge all kinds of wireless
devices wherever you are. It also includes a twin USB output for
charging devices with a standard connector.
Say goodbye to tangled wires and misplaced charging cables.
Thanks to its exclusively designed silicone belt, you can charge your
smartphone while carrying it into your bag.
Wireless charging area
Power switch
Output USB 1 (DC 5V 1A)
Input of Micro 5 pin (DC 5V 2A)
Output USB 2 (DC 5V 2A)
PRODUCT INTRODUCTION:
PRODUCT OVERVIEW:
USER MANUAL miniBatt PowerGOO.indd 3 25/4/16 12:39
MAIN FUNCTION: Wireless Charger + Power Bank
TYPE OF COIL: 3 Coils
Qi STANDARD: Version 1.2
CHARGING METHOD: One to One
INPUT: DC5V / 2.0A
WIRELESS OUTPUT: DC5V / 1.0A
USB OUTPUT 1: DC5V / 1.0A
USB OUTPUT 2: DC5V / 2.0A
BATTERY CAPACITY: 6.000 mAh
CHARGING DISTANCE: 6-8 mm.
EFFICIENCY RATE: 72%
WORKING FREQUENCY: 110-205KHz
DIMENSIONS: 153.3 x 82.8 x 13.7mm
BOX INCLUDES: Wireless Charger, USB Cable, Manual
Instructions
SPECIFICATIONS:
USER MANUAL miniBatt PowerGOO.indd 4 25/4/16 12:39
1. Input of Micro USB (5Pin)
(DC 5V 2A)
2. Output of USB1 (DC 5V 1A)
3. Output of USB2 (DC 5V 2A)
4. Power switch
5. Indicator Light
1.Wireless charging when the charger plugged into a wall outlet:
1. Insert one end of USB charging cable into power adaptor (not
included) (A) or to the computer (B).
- Wireless Charger + Powerbank 1 PCS
- Micro USB to USB a digital cable 1,5 m 1 PCS
- User Manual 1 PCS
INTRODUCTION OF BUTTON AND INDICATOR
LIGHT:
PARTS LIST (INCLUDED IN THIS PACKAGE):
USER GUIDE:
Switch on and charging
12 3
6
5
4
(A) (B)
USER MANUAL miniBatt PowerGOO.indd 5 25/4/16 12:39
2. Insert another end of USB charging cable into Micro USB port
(5 PIN) jack of the wireless charger.The LED indicator lights up to
indicate well connectivity.
4. Place your “Qi enabled Smartphone” on the charging pad.The
blue LED light is blinking.
3. To turn on:
Lightly press the power switch
button to turn on the charger.
The red light will be on.
press the power button
5. Long press the power switch
for three seconds to turn off the
Wireless Charging Function.Then
the red light will be off.
USER MANUAL miniBatt PowerGOO.indd 6 25/4/16 12:39
2. Charging the Powerbank:
Insert one end of the USB charging cable into power adaptor (not
included), and the other end to the Micro USB (5 PIN) jack.The blue
LED light will flash continuously during charging.The indicator blue
LED lights will be on after fully charged.
3.Wireless charging when the charger is not plugged into a wall
outlet (using Powerbank):
1. To turn on:
Lightly press the power switch button to turn on the charger.
The red light will be on.
2. Place your “Qi enabled Smartphone” on the charging pad.The
blue LED light is blinking.
When the Powerbank is charged, you can bring it with you wherever you want to
charge your smartphone!
Thanks to its exclusively designed silicone belt, the smartphone remains attached
to the charger.
3. Long press the power switch for
three seconds to turn off the Wireless
Charging Function.Then the red light
will be off.
USER MANUAL miniBatt PowerGOO.indd 7 25/4/16 12:39
• Keep the device dry. Precipitation, humidity and all types of liquids
or moisture can contain minerals that corrode electronic circuits. If
your device gets wet, allow the device to dry.
• Use the charging station for intended purposes only. Never use
a damaged charger.The charging station should only be used at
normal indoor conditions.
• Do not attempt to charge a device having a damaged, cracked or
open battery case or a device that is not compatible with Qi.
• Do not use the device in dusty or dirty areas. Moving parts and
electronic components can be damaged.
• Do not expose the device in high or low temperatures. The device
can be damaged.
• Do not attempt to open , disassemble or dismantle the charger.
• Unauthorized modications may damage the device and violate
regulations governing radio devices.
• Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and mechanics.
• Only use a soft, clean, dry cloth to clean the surface of the device.
• Please use suitable or compatible adapter to connect with the
transmitting terminal.
• Please remove the protective layer before recharging.
• Please, do not charge your mobile phone when you charge the
battery of the powerbank.
• Please long press the power switch three seconds to turn off power
when you do not use wireless charge.
• Please stop using it immediately if battery is bulging, leaking or
smelling.
• This product should be charged for once every month at lease
when you do not use it for a long period.
SAFETY INFORMATION:
USER MANUAL miniBatt PowerGOO.indd 8 25/4/16 12:39
ADDITIONAL INFORMATION:
Applicable devices:
- Devices with build-in wireless charging receiver.
- Devices with reserved wireless charging interface beside it battery.
- Devices with wireless charging receiver in its protection case.
Note: All devices must be Qi Standard.
• Please use a 5V/2A adaptor and good quality cable to ensure
charging effect.
• Please keep the charger away from water or other liquid.
• If you need to clean the charger, please make sure it is not
connected to power supply.
• Working temperature: 0℃ ~ 45℃
• Working humility: 10% ~80% (no vapor condense)
Rubber belt included to fix the phone to the wireless charger
when transporting.
USER MANUAL miniBatt PowerGOO.indd 9 25/4/16 12:39
TROUBLESHOOTING:
1. If only one blue LED light is blinking, turn on the power switch.
Otherwise battery will run down soon. Please recharge.
2. If there is not any device on the charging pad, the charger will be
disconnected automatically after 5 minutes.
3. If the center point of the receiving terminal is deflected over 20 mm
from the center point of transmitting terminal, the machine power
will be off automatically. The more deected, the more inefciency.
4. If the transmitting terminal detects that the current of load is over,
it will disconnect connection automatically.The transmitting and
receiving terminal will be kept standby status automatically.
Reset receiving terminal and then restart.
5. The charger will be disconnected automatically when it detects
the load current is over.
6. If you use incompatible adapter, the battery will be not fully
charged, and the terminal will be damaged.
USER MANUAL miniBatt PowerGOO.indd 10 25/4/16 12:39
Table of contents
