MILL AV600 User guide
Assembly and instruction manual
Series:
Steel & Glass WiFi
Please read the instructions carefully before use.
Take good care of this manual for later use.
EN DK FINO SE
Thanks for buying Mill
@millheat
millheat.com
A
Follow us on social media:
Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution
of oil filled radiators and other types of heaters. From 1992 to 2009, we had gained
significant knowledge and expertise of different type of heaters, thus enabling us to
sell to many of the largest retailers in the Nordic countries.
In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry
with fresh new eyes and wondered why there had been so little change with the
appearance of portable heaters in the last 20 years, especially since interior design in
general had changed dramatically over the years. Philip thought consumers should
have more styles to choose from other than the typical old-fashioned, traditional
heaters.
Since heaters are part of so many homes, Philip and Cato decided to use their
extensive knowledge to re-invent the design of heaters. They wanted to create
beautiful, modern and minimalistic heaters, using the most advanced technology, that
would complement people’s homes. They launched the brand “Mill” in 2012.
Mill offers revolutionary, innovative Norwegian designs. We are continuously
innovating to complement our line of products to meet consumers’ demand.
Prospering on our success in the Nordics we decided to promote Mill at some of the
world’s largest electronic fairs and home shows, and the feedback from
retailers and distributors all over the world were amazing. We are proud to say that
consumers in over 25 countries can now keep warm with style!
1
millheat.com
EN
Content
P. 2-3
P. 4
P. 4
P. 4
P. 4
P. 5
P. 5
P. 5
P. 5
P. 6
P. 6
P. 6
P. 6
P. 7
P. 7
P. 8
P. 9
P. 9
P. 9
P. 9
P. 10
P. 10
P. 10
Important safety information
Specifications
Before first use
First use
Minimum distances
Description of heater
Assembly
Power indicator
Temperature calibration
Resetting the heater
Memory function
“Open Window” function
Instructions
Usage without WiFi connection
Usage with WiFi connection
Color codes (WiFi control light)
Activating WiFi
Deactivating WiFi
Reconnecting to WiFi
Delete WiFi settings
Maintenance
Warranty
Waste disposal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.
STORE THIS INSTRUCTION
MANUAL FOR FUTURE USE!
NEVER TOUCH YOUR HEATER OR ITS
CASING WITH WET HANDS!
• The product is intended for home use only.
• Make sure the heater is connected to the house's regular mains
as indicated on the heater.
• New heaters will produce a specific odor when used the first time.
This will stop after a short time and is completely harmless.
• Check for any pieces of packing foam or cardboard that may
have fallen into the heating elements of the heater. These pieces
must be removed to avoid unpleasant odors.
• Prevent the heater from overheating – do not cover.
• Always turn off the heater and unplug it when not used for a long
period of time.
• Pay special attention if the heater is used in rooms where
children, the handicapped or elderly reside.
• The heater should not be set up directly beneath an electrical
socket outlet.
• The cord must not be laid under any kind of carpet. Make sure the
cord is laid in such a way that nobody can trip on it.
• The heater must not be used if either the cord or plug is
damaged. The heater must not be used if it has been dropped
on the floor or is damaged in any other way causing it to
malfunction.
• The cord must be repaired by the manufacturer or by an expert if
it has been damaged, to avoid dangerous situations.
• Avoid using extension cords, which may overheat and could
possibly start a fire.
• Never cover the air vents on the heater. Avoid potential fire
hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal flat
floors.
Important safety information
WARNING! To avoid electric shock or damage due to the
heat, always make sure the plug is pulled out before the
heater is moved or cleaned.
millheat.com
EN
• The heater should not be installed in close proximity to
flammable materials of any kind because there can always be a
risk of fire.
• The heater must never be used in rooms where gasoline, paint or
other flammable liquids are stored, such as in a garage.
• Never touch an electric heater with wet hands. The heater
should be installed so a person showering or taking a bath
cannot come into direct contact with it.
• Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and
vulnerable people are present.
• The heater must be switched off, the plug removed and the
heater must cool down before it is moved.
• Avoid overloading the mains (the circuit) where the heater is
connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
• Do not use this heater in small rooms when they are occupied
by persons not capable to leaving the room on their own, unless
constant supervision is provided.
• The product cannot be used by children under 8 years of age
and persons with reduced physical or mental abilities or lack
of experience and knowledge unless they have been given
supervision or instruction in the safe use of the product and
understand the hazards involved.
• Children should not play with the product. Cleaning and
maintenance should not be done by unsupervised children.
• Children under the age of 3 should be kept away from the
product, unless they are under constant supervision.
• Children aged 3 to 8 years are only permitted to turn the
product ON/OFF, assuming the heater is mounted according
to the assembly instructions and the children have received
instruction or supervision in the safe use of the product and
understand the hazards involved.
• Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
WARNING! The heater must not be used if the glass panels are
damaged (this applies to the products with model names starting
with AV).
4
EN
Model Thermostat Color Height Width Amperage Power (W)IP WiFi
NE600WIFI WiFi White
NE900WIFI WiFi White
NE1200WIFI WiFi White
NE800LWIFI WiFi White
NE1000LWIFI WiFi White
AV600WIFI WiFi White
AV900WIFI WiFi White
AV1200WIFI WiFi White
AV800LWIFI WiFi White
AV1000LWIFI WiFi White
The heaters are approved for use in zone 2 in wet rooms (IPx4 approved)
ATTENTION! The heaters will be connected directly to your WiFi router and it is
of active devices connected at the same time.
First use
Before first use
After unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the product.
Keep the outer packaging to transport the heater in the future. If you want to dispose
the packaging, make sure it is done properly. Keep plastic bags away from children.
After turning on the heater for the first time or after an extended period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for future use.
It is also normal for the heater to make “sounds” when it warms up or cools down.
Maximum transmitting power: ≤20dBm
Frequency range: 2400-2483.5MHz
NE1500WIFI WiFi White
~
~
~
~
~
~
~
~
~
~
~
≥100 mm
≥50 mm≥50 mm
≥100 mm
≥100 mm in front
of heater
Minimum distances
Temperature calibration
f
5
millheat.com
EN
(Can be done even if you are connected to WiFi)
Description of heater
MILL STEEL MILL GLASS
A B
Assembly
2.Wall bracket
3. Temperature sensor
4. Heat emission
5.Thermostat
6.Steel front
2.Wall bracket
3.Temperature sensor
4. Heat emission
5 Thermostat
6.Glass front
It may occur deviation between the temperature registered by the heater and the
actual temperature in the room. This can be caused by several reasons, however, the
most common is that the heater is placed in a fair distance from where you usually
reside. When you set the temperature to for example 22 degrees, it is only natural that
you expect the same temperature where your sofa is placed for instance. However,
the temperature sensor is placed on the product itself, and therefore a deviation in
temperature may occur. To adjust this, all Mill heaters are equipped with a calibration
function, which enables you to adjust the temperature registered by the heater. N.B! The
room must have achieved a stable temperature before any calibration.
Drill holes in the wall for holes 1 & 2. Then drill holes in the wall for the topmost holes
(holes 3 & 4 by using 6)
Insert the wall plugs into the drilled holes and attach the bracket with 4 screws
Place the heater on the lower lugs on the bracket, then hang the heater on the
upper lugs (lift the heater slightly to align the heater with for the upper lugs). Screw
in the locking screws on the top of the bracket (clockwise)
Attention! Horizontal placement only
If the heater uses power (for example, when it heats up), the power indicator is on.
6
EN
Resetting the heater
main switch.
Memory function
The heater remembers all the temperature settings and will automatically return to the
desired temperature after a power failure. If your heater is connected to WiFi it will
automatically reconnect with WiFi (where all temperatures aresaved) after a power cut.
Instructions
TIPS! The thermostat can be used as a regular electronic thermostat (i.e. the
heater will maintain a constant temperature 24 hours a day). Please see the section
explaining usage without WiFi connection for further information
Control Panel
ATTENTION! In the event of a power cut, the thermostat will reconnect with WiFi
where all the temperatures are saved.
WARNING! BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL. IF
THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY CAUSE
THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.
If the temperature sensor is not functioning properly, you will see this
symbol on the display. Please contact the dealer or importer.
Turn off the heater's main switch. Press and hold while you turn on the heater's
The heater has an “open window” function that is activated instantly when it registers a
sudden drop in temperature with more than 2 degrees Celsius in 2 minutes. The heater will
automatically stop heating and FO will be visible in the display of the heater.
The heater will automatically start heating again after 10 minutes (the display switch
from FO to desired room temperature).
1. Display (shows the desired room temperature by default)
2. WiFi indicator
3. Power indicator — Shows whether the heater is using power or not
4. Control button (+) (increase temperature)
5. Control button (–) (reduce temperature)
6. WiFi button
7. Function button (F)
7
millheat.com
EN
Usage without WiFi connection
Set desired temperature without WiFi connection
Press the arrow buttons to set the desired temperature. The heater keeps an even
ATTENTION! Can only be done when WiFi is deactivated (see page 9 for deactivating
WiFi).
Usage with WiFi connection
A free app is available for downloading for iOS and Android.
By connecting your heaters with the iOS/Android device you can do the following:
• Control all your heaters situated in multiple locations . Everything is controlled with
the Millheat-app (with same user)
• Set up weekly programs (or use the standard program already available in the app)
by using the 4 modes: Comfort, Sleep, Away and OFF
• Set individual temperature for different modes in each room
• Override the set programs for the whole house, a specific room or a specific heater.
There is no need to edit your program if you get home earlier than normal one day
• Enable vacation mode for saving energy while you are away. The app will
automatically increase the temperature in your house before you get back home
• Share your house with other family members, making control easy
• If internet is down one can easily turn off the WiFi on the heaters and control them
manually, so that the heaters keep an even temperature throughout the whole day
and night.
• + many other things
To download the app search for “millheat” in Appstore or Google Play and
install the app on your device.
Before use:
Be aware that the Millheat-app must be installed before you can connect your
heaters to your WiFi network. You can then simply follow the instructions given in the
app when connecting your heaters. The heaters will connect directly to your router via
WiFi with 2,4 Ghz mode b/g/n. Minimum OS requirement: iOS 8.0 and Android 4.0.
temperature the whole day and night.
8
EN
Color codes (WiFi control light)
The heater has not been connected to WiFi. The heater keeps an even
temperature throughout the whole day and night.
The heater is online in the Millheat cloud
1.The heater’s WiFi is deactivated by the user
2.When installing/connecting the Millheat-app and cloud, the light will flash
in various speed. This is normal.
The heater has a problem connecting to or finding the WiFi signal. Please do
the following:
1. Please turn the heater OFF and ON again
2. Please restart the WiFi router
3. Please check the WiFI router to make sure the capacity is sufficient for the
number of active devices connected at the same time
4. Please make sure 2,4 Ghz is activated. If the problem persists we
recommend you to deactivate 5 Ghz during the installation. After the
installation 5 Ghz can be activated again.
The heaters are offline and have no contact with the Millheat cloud
Go to our help desk at www.millheat.com for more information or if you have
any questions regarding the Millheat-app, connecting to WiFi or other relating
questions.
ATTENTION! The heaters will be connected directly to your WiFi router and it
is therefore important to make sure the router has sufficient capacity for the
number of active devices connected at the same time.
This manual suits for next models
1
Table of contents
Languages:
Other MILL Heater manuals
MILL
MILL Invisible Series User guide
MILL
MILL Oil Series User guide
MILL
MILL SG2000MEC User guide
MILL
MILL PA600WIFI3 User guide
MILL
MILL SG2000LED BLACK User guide
MILL
MILL Steel & Glass Series User guide
MILL
MILL SG2000MEC User guide
MILL
MILL Steel WiFi Series User guide
MILL
MILL CO1200WIFI3 User guide
MILL
MILL Steel & Glass Series User guide
MILL
MILL CO1200WIFI3 User guide
MILL
MILL NE900WIFI User guide
MILL
MILL PTC Series User guide
MILL
MILL IB300 User manual
MILL
MILL Convection WiFi Series User guide
MILL
MILL AB-H700MINI User guide
MILL
MILL Oil Series User guide
MILL
MILL Glass Series User guide
MILL
MILL Gentle Air Series User guide
MILL
MILL CO1200WIFI3 User guide
Popular Heater manuals by other brands
oventrop
oventrop Regucor Series quick start guide
Blaze King
Blaze King CLARITY CL2118.IPI.1 Operation & installation manual
ELMEKO
ELMEKO ML 150 Installation and operating manual
BN Thermic
BN Thermic 830T instructions
KING
KING K Series Installation, operation & maintenance instructions
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Installation instructions and owner's manual
Empire Heating Systems
Empire Heating Systems WCC65 Installation and owner's instructions
Wetekom
Wetekom 92 86 43 Original instructions
Desa
Desa SPC170-F owner's manual
Watlow
Watlow Watrod Electric Tubular Heaters Specifications
Haverland
Haverland ECO-DRY GPS Series Instruction & installation manual
Stelpro
Stelpro ASILVC2060 Series user guide