MILL SG2000MEC User guide

Assembly and instruction manual

Series:

Dette produkt er kun egnet til godt isolerede rum eller leijlighedsvis

brug.

This product is only suitable for well insulated spaces or

occasional use.

Denna produkt är endast lämplig för välisolerade utrymmen eller

sporadisk användning.

Dette produktet er kun egnet til godt isolerte rom eller ved

sporadisk bruk.

Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin tai

satunnaiseen käyttöön.

Please read the instructions carefully before use.

Take good care of this manual for later use.

Instant

Convection

heater

Scandinavian home comfort

Mill is a Norwegian brand that develops heating and indoor air quality products tailored for

your modern home. Inspired by Scandinavian nature, our products are designed to sustain



good air quality.

Mill products are praised for their minimalistic and elegant features as they blend in

naturally with any modern interior. Our advanced and user-friendly technology will support

a relaxing and healthy home space with reliable temperatures and air quality. Mill’s vision

is to develop products that create an enjoyable and harmonic household atmosphere,

enhancing both comfort and style; the ultimate Scandinavian home comfort.

We hope you enjoy your Mill product.

User manual in local language is available at

millnorway.com

Improving our environmental footprint is a key priority for Mill. Reducing the consumption

of paper is one of the steps in Mills Sustainability program. If you need a printed copy

please contact us at post@millnorway.com. Safety information in local language is availa-

ble at the back of this booklet.

fb.com/millnorway

@millnorway

millnorway.com

STORE THIS INSTRUCTION MANUAL FOR

FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS CASING

WITH WET HANDS!

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

Content

P. 2-4

P. 4

P. 5

P. 6

P. 7

P. 8

Important safety information





First use

Description of heater

Parts

Assembly

Instructions mechanical thermostat

Usage mechanical thermostat

Instructions electronic thermostat

Usage electronic thermostat

Temperature calibration

Resetting the heater

Maintenance

Warranty

Waste disposal

Please read the instructions carefully before use. Take

good care of this manual for later use.

2millnorway.com

Important safety information

You must obey common safety guidelines when using

electrical products, especially in the presence of chil-

dren.

WARNING! To avoid electric shock or damage due

to the heat, always make sure the plug is pulled out

before the heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house’s regular

mains as indicated on the heater.

• 

-

pletely harmless.

• Check for any pieces of packing foam or cardboard that

may have fallen into the heating elements of the heat-

er. These pieces must be removed to avoid unpleasant

odors.

• Prevent the heater from overheating — do not cover.

• Always turn off the heater and unplug it when not used

for a long period of time.

• Pay special attention if the heater is used in rooms

where children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an

electrical socket outlet.

• The cord must not be laid under any kind of carpet.

Make sure the cord is laid in such a way that nobody can

trip on it.

• The heater must not be used if either the cord or plug is

damaged.

• The heater must not be used if it has been dropped on



malfunction.

• The cord must be repaired by the manufacturer or by an

expert if it has been damaged, to avoid dangerous

situations.

• Avoid using extension cords, which may overheat and



• Never cover the air vents on the heater. Avoid poten-



blocked or covered. The heater should be used in rooms



• The heater should not be installed in close proximity





• The heater must never be used in rooms where gasoline,



garage.

• Never touch an electric heater with wet hands. The heat-

er should be installed so a person showering or taking a

bath cannot come into direct contact with it.

• Some parts of this product can become very hot and

cause burns. Particular attention has to be given where

children and vulnerable people are present.

• The heater must be switched off, the plug removed and

the heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heat-

er is connected. The heater may overload the electrical

circuit if other electrical devices are plugged into the

same socket outlet.

• Do not use this heater in small rooms when they are

occupied by persons not capable to leaving the room on

their own, unless constant supervision is provided.

• The product cannot be used by children under 8 years of

age and persons with reduced physical or mental abil-

ities or lack of experience and knowledge unless they

have been given supervision or instruction in the safe



• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised

children.

4millnorway.com

• Children under the age of 3 should be kept away from

the product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn th

product ON/OFF, assuming the heater is mounted ac-

cording to the assembly instructions and the children

have received instruction or supervision in the safe use



• Do not use this heater in the immediate surroundings of

a bath, a shower or a swimming pool.



Model Thermostat Color Amperage Power (W) Fan

SG2000MEC Mechanical White ~  No

SG2000LED Electronic White ~  Yes

SG2000GLASS Electronic White ~  Yes

SG2000LED BLACK Electronict Black ~  Yes

CO2200MECMAX Mechanical White ~  No

CO2200LEDMAX Electronic White ~  No



After unpacking the heater, check to make sure the product was not damaged during

transport. Contact the retailer or importer if you discover any visible damages to the prod-

uct. Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

First use



heater can produce a burnt odor for a short time. This is normal. Please read all the instruc-

tions carefully before use. Save the instruction manual for future use.

Description of heater

Please see table above for which models that have mechanical/electronic thermostats.

See  gure 1 on separate illustration sheet

and Mechanical thermostat

1. 

2. Thermostat

3. Output selector

Legs (plastic)

, and Electronic thermostat

1. 

2. LED display

3. Thermºstat + output selector

Fan (does not apply to CO2200LEDMAX)

5. ON/OFF

Legs (aluminium)

Parts

See  gure 2 on separate illustration sheet

Mechanical thermostat

• 

• 2 foot brackets

• 2 rails for the feet

Electronic thermostat

• 8 screws (pre-mounted)

• 2 foot brackets

• 2 rails for the feet

WARNING! The heater must not be used if the glass panels are

damaged (applies to SG2000GLASS only).

ATTENTION! This heater is only meant to be used as a supplementary heating source,

and must not be used without supervision

Assembly

See  gure 3 on separate illustration sheet

Mechanical Thermostat

1. Insert both legs into the brackets so you get a stable foot.

2. Remove the pre-mounted screws from the bottom of the heater and place the heat-

er gently on its head to mount the feet.

3. Two screws must be fastened on each foot bracket.

NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Electronic Thermostat

1. Remove the pre-mounted screws on both legs before you insert them into the

brackets, so that you get a stable foot.

2. Attach the legs to the brackets by tightening 2 screws into each bracket.

3. Remove the pre-mounted screws from the bottom of the heater and place the heat-

er gently on its head to mount the feet.

Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Instructions mechanical thermostat



Control Panel

See  gure 4 on separate illustration sheet

1. Thermostat: Adjust the desired heat settingt

2. Output selector:

SG2000MEC

0. OFF

I. 750W

II. 1250W

III. 2000W

CO2200MECMAX

0. OFF

I. 1000W

II. 1200W

III. 2200W

6millnorway.com

Usage mechanical thermostat

1. Set the output selector to the OFF position (0) and the thermostat to minimum. Plug

the heater into a grounded outlet.

2. Set the output selector to position I, II or III. Turn the thermostat up to the maximum

position. When the desired room temperature has been reached, turn the thermostat

slowly down until you hear a click. The thermostat can now remain in this position

until a different room temperature is desired. As soon as the room temperature falls

below this level, the heater will automatically switch on again. When the room has

again reached the desired temperature, the heater will switch off again.

3. If you wish to change the room temperature, repeat the instructions in step 2.

The heater has an overheat protection that turns the device off if any parts become

extremely hot.

5. To switch the heater off, turn the output selector to the 0 position. If the heater will

be left unused for a longer period of time, pull out the plug.

WARNING!-



ATTENTION! This heater is only meant to be used as a supplementary heating source,

and must not be used without supervision

Instructions electronic thermostat



Control panel

See gure 5 on separate illustration sheet

1. Thermostat, output selector and timer button (applies to CO2200LEDMAX only):

i. Turn the selector to the left to decrease the temperature, and turn the selector to

the right to increase the temperature.

ii. Push the button to change the desired power level. 3 power levels

iii. Press and hold the button for 3 seconds to activate the timer function, and



2. Fan ON/OFF (does not apply to CO2200LEDMAX).

3. ON/OFF button.

Power indicator — Shows whether the heater is using power or not.

5. Indicates the output level.

Indicates whether the fan is activated/timer indicator for the CO2200LEDMAX.

7. Desired room temperature.

8. Standby indicator for CO2200LEDMAX.

Usage mechanical thermostat

1. Plug the heater into a grounded outlet.

2. Press the ON/OFF button.

3. Choose the desired power I, II or III, by pressing the output selector. Turn the ther-

mostat to the desired temperature while looking at the display. As soon as the room

temperature drops below this level, the heater will automatically start again. When

the room has reached the desired temperature again, the heater will turn itself off.

The thermostat goes from 5 to 35°C.

5. If you want to change the temperature in the room, repeat step 3

Press the fan button to start the fan (does not apply to CO2200LEDMAX). Note that

the fan is only active when the heater is heating up (when the power indicator

is on). Timer function for CO2200LEDMAX: Press and hold the timer button for 3

seconds to activate the timer function, 00 will appear in the display. Turn the timer



function. After selecting the number of hours, press the timer button, or wait 15



timer function is off, the heater goes to standby mode, the display shows OF and the

standby indicator will light up. The heater has an overheat protection that turns the

device off if any parts become extremely hot.

8. If the temperature sensor is not functioning as it should,$will be shown on the

display. In such instances, the heater will switch itself off. Please contact your

distributor or importer.

9. To turn off the heater, press the ON/OFF button. Should the heater be left unused

for a longer period of time, pull out the plug.

WARNING!



ATTENTION! This heater is only meant to be used as a supplementary heating source,

and must not be used without supervision

Temperature calibration

SG2000LED/SG2000LED BLACK/SG2000GLASS

See  gure 6 on separate illustration sheet

It may occur deviation between the temperature registered by the heater and the actual

temperature in the room. This can be caused by several reasons, however, the most com-

mon is that the heater is placed in a fair distance from where you usually reside. When you

set the temperature to for example 22 degrees, it is only natural that you expect the same



placed on the product itself, and therefore a deviation in temperature may occur. To adjust

this, all Mill heaters are equipped with a calibration function, which enables you to adjust



temperature before any calibration.

Press and hold @for 5 stconds and use + or – to set the actual temperature observed in

@

8millnorway.com

Resetting the heater

See  gure 7 on separate illustration sheet

Turn off the heater’s main switch. Press and hold @or %while you turn on the heater’s

main switch.

Maintenance

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on the

heater again.

3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

 Dust etc. should be removed with a soft cloth.

5. The heater can be stored in a dry and clean place.

 If the heater stops working, do not attempt to repair it yourself because it can cause a



Warranty

The warranty is valid for 2 years. The heater will be repaired or replaced during this time

should any malfunction occur. The warranty applies if the heater is used according to

these instructions and the customer can present a purchase receipt. If the heater malfunc-

tions in any way, please contact the store where it was purchased or the importer.

Waste disposal

The symbol#indicates that this product is not to be disposed of together with house-

hold waste. This product must be delivered to a recycling service or container for electrical

appliances and electronic equipment. This is done to avoid health risks and prevent harm

to the environment. Local businesses (or the environmental station in your neighborhood)

are required by law to accept and recycle such products, as a means of environmentally

sound disposal.

Mill International AS

Grini Næringspark 10



Norway

www.millnorway.com

Other manuals for SG2000MEC

This manual suits for next models

Table of contents

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide