Miele CVA 4062 User manual

Installation Instructions

CVA 4062 en-CA

Installation, repair and maintenance work should be performed by

a Miele authorized service technician in accordance with national

and local safety regulations and the provided installation instructions.

When using electrical appliances basic safety precautions should always be

followed, including the following:

Read all instructions before installation or use of the coffee system.

Please read these instructions

carefully to prevent accidents and

machine damage.

This appliance complies with current

safety requirements. Improper use

of the appliance can cause personal

injury and material damage.

Read this safety information carefully

before operating the appliance.

They contain important information

on the safe installation, operation,

and care of your coffee system. To

avoid the risk of personal injury or

damage to the coffee system, it is

important that you carefully read the

instructions.

Keep them in a safe place and pass

them on to any future user.

Proper use

~This coffee system is for household

use only, for the preparation of coffee

beverages (espresso, cappuccino, latte

macchiato, etc.).

Do not use this machine other than for

its intended use. Any other use could

be hazardous.

~Persons which lack physical,

sensory or mental abilities or

experience with the machine should not

use it without supervision or instruction

by a responsible person.

Children

~Close supervision is necessary

when any appliance is used by or near

children. They could easily be scalded

or burned.

~Never let children play with the

coffee system.

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

~Before installing the appliance,

check for externally visible damage.

Do not operate a damaged appliance.

~Before connecting the appliance to

the electrical supply make sure that the

voltage and frequency listed on the

data plate correspond with the

household electrical supply. If in doubt,

consult a qualified technician.

~Be certain your appliance is

properly installed and grounded by a

qualified technician. To guarantee the

electrical safety of this appliance,

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

any doubt, have the electrical system of

the house checked by a qualified

electrician.

~The appliance must be properly

installed before operation to ensure that

no electrical components are

accessible. Ensure that power is not

supplied to the appliance while

installation work, repairs or

maintenance is performed.

~Do not use an extension cord to

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance

(danger of overheating and open

ground circuit).

~Do not install or use outdoors even if

installed in the display cabinet.

~If the appliance is installed behind a

door front, use the appliance only when

the door front is open. Do not close the

door front when the appliance is in

operation.

~Before service or maintenance

disconnect the power supply by either

removing the fuse, "tripping" the circuit

breaker or unplugging the unit.

~This appliance is not designed for

maritime use or for use in mobile

installations such as recreational

vehicles or aircraft. However, under

certain conditions it may be possible for

installation in these applications. Please

contact the Miele Technical Service

Department with specific requirements.

~Installation work and repairs must

only be performed by a trained

technician in accordance with national

and local safety regulations. Repairs

and other work by unauthorized

persons could be dangerous and may

void the warranty.

~While the appliance is under

warranty repairs should only be

performed by an authorized service

technician. Otherwise the warranty is

void.

~Defective components should be

replaced by Miele original spare parts

only. Only with these parts can the

manufacturer guarantee the safety of

the appliance.

~To protect against fire, electric

shock and injury to persons do not

submerge the cord or plugs in water or

other liquids.

IMPORTANT SAFETY INSTRUCTIONS

~Do not let the cord hang over the

edge of a table or counter, or touch hot

surfaces.

~Do not operate any appliance with a

damaged cord or plug, or after the

appliance malfunctions or has been

damaged in any manner. Contact

Miele.

~Always attach the cord to the

appliance first, then plug it into the wall

outlet. To disconnect, turn the machine

off, then remove the plug from the wall

outlet.

~Never open the outer casing of the

appliance. Tampering with electrical

connections or components and

mechanical parts is dangerous and

may cause machine damage.

~If installed in combination with

another appliance, a protective base

must be installed between the coffee

system and the appliance.

~Install or locate this appliance only

in accordance with the provided

installation instructions.

Use

Caution! Do not look directly or with

an optical instrument into the

lighting - laser radiation.

Caution! Risk of burns when

dispensing hot beverages, they are

extremely hot.

~Before the first use, flush the supply

lines for water and milk and thoroughly

clean the coffee system and

stainless-steel milk container.

~Only fill the water tank with cold,

fresh tap water. Warm or hot water, or

any other liquids may damage the

machine. The water should be changed

daily to prevent bacteria or mold

growth.

~Do not use deionized or mineral

water. They may lead to heavy calcium

built-up in the machine that can

damage the unit.

~Do not put anything but coffee

beans into the beans container. Do not

put ground coffee in the beans

container, it will damage the grinding

unit.

~Do not fill anything but ground

coffee or a cleaning tablet (for the brew

unit) in the funnel for ground coffee,

otherwise it will get damaged.

~Only use plain milk. Flavored milk

products contain substances that can

clog the coffee system.

IMPORTANT SAFETY INSTRUCTIONS

~Sugar can damage the appliance!

Caramelized or otherwise pre-treated

coffee beans or other sugar containing

beverages must not be put in the

machine.

~Never place a cup with an

alcohol-coffee mixture underneath the

main dispenser. Plastic parts of the unit

could catch fire!

~The hot water and steam dispensed

could cause scalding. These functions

must be used carefully. Never hold any

parts of the body under the steam

nozzle or the hot water dispenser. The

machine must never be used to clean

objects.

~Never use a steam cleaner to clean

the appliance. Pressurized steam could

damage electrical components and

cause a short circuit.

~Clean the coffee system daily to

prevent bacterial growth. All parts of

the coffee system are dishwasher-safe

except for the brew unit, bean

container, stainless-steel milk container

and lid, and main dispenser cover.

Failure to properly maintain machine

may cause health issues.

~Be aware of how long milk in stored

in the milk container. If milk is not

continually cooled it can readily spoil

causing illness. Be sure the milk

container and pipework are properly

cleaned and maintained. See "Cleaning

and Care" for more information.

~To avoid injuries allow the coffee

system to cool before cleaning or

putting on and taking off parts. Turn the

machine off at the main switch when

not in use and before cleaning.

~The appliance must be descaled

regularly with the supplied descaling

tablets. In areas with very hard water

the machine may need to be descaled

more often.

~Only use the descaling tablets

provided by Miele. Take care to use the

correct mixture of water and descaler,

otherwise it may cause damage.

~Depending on the oil content of the

coffee, the brew unit may clog. Clean

the brew unit every 200 cups with a

cleaning tablet. The display shows a

reminder message.

~Dispose of the coffee waste in a

trash can, not in the sink. The sink

could get clogged.

~Do not hang, lean, sit or place heavy

items on the door. The machine could

be damaged.

~The use of accessory attachments

not recommended by the appliance

manufacturer may result in fire, electric

shock or injury to persons.

~The appliance is designed for use

in room temperatures between 59°F

and 140°F (15°C and 60°C). Do not use

the appliance outside of this range of

temperatures.

SAVE THESE INSTRUCTIONS

AND REVIEW THEM

PERIODICALLY

IMPORTANT SAFETY INSTRUCTIONS

Make sure that the power to the

machine is OFF before installing or

performing maintenance or repairs.

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Verify that the voltage, load and circuit

rating information found on the data

plate match the household electrical

supply before installing the coffee

system.

Do not connect the appliance to a

power inverter or directly to power

produced outside of the normal

electrical grid (i.e. direct solar or wind

power source).

Direct connection to such power

sources can cause power surges and

tripped breakers when the appliance is

turned on, and could damage the

appliance.

Do not connect the appliance to energy

saving plugs or outlets. The reduction

of power to the appliance caused by

these devices will cause the appliance

to run hot and may damage it and/or

shorten its usable life.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or contact Miele’s

Technical Service Department. See

back page for contact information.

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Important

The coffee system comes equipped

witha6ft(1.8 m) power cord with a

NEMA 5-15P molded plug for

connection to a 120 V, 15 A, 60 Hz

power supply.

Electrical connection

Installation options

The coffee system is designed to be built into cabinetry.

Miele appliances can be installed flush or proud. Discuss your installation

requirements with your architect, designer and installer.

A combination with other Miele built in appliances is possible. If the machine is

installed in combination with other appliances, it should be installed with a

protective base between the appliance and the unit (exception: installation with a

built-in plate warmer).

A special display cabinet is also available from your dealer or Miele, as an

installation option.

Installation

Make sure power is not supplied to

the appliance while installation or

maintenance work is performed.

Disconnect the power supply to the

work area by unplugging the unit,

tripping the circuit breaker or

removing the fuse. The coffee

system must be installed into

cabinetry before being used.

This unit should only be used in

room temperatures ranging between

59 °F and 140 °F.

To align the appliance door flush with

the kitchen cabinetry, there must be a

sealing strip around the installation

recess; otherwise, a sealing strip must

be put in place around the appliance.

^If there is no sealing strip around the

installation recess, stick the Miele

sealing strip onto the appliance from

the back before putting it into the

recess. Sealing strips are available

from Miele.

^Unscrew the height adjustable feet

on the underside of the machine

about 1/16" (2 mm).

^Push the appliance all the way back

into the cabinet and center it. If

necessary level the unit with the four

height adjustable feet.

The feet can be turned out up to 3/8"

(10 mm).

^Plug the appliance into the electrical

outlet.

Installation

^Push the appliance into the niche.

^Open the door and partially tighten

the screws.

^Carefully turn the lower screws, a,to

center the machine.

^To secure the appliance in the

cabinet, tighten the upper screws, b,

by hand. Do not use an electric

screwdriver.

Adjusting the door hinges

The door hinges can be adjusted if the

door cannot be opened easily.

^To adjust the door sideways, a, turn

screw a.

^To adjust the door to the front or

back, b, turn screw b.

Installation

Alteration rights reserved / 0710

CVA 4062, CVA 4068

INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST

CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

M.-Nr. 07 816 880 / 00

Other manuals for CVA 4062

This manual suits for next models

Table of contents

Popular Coffee Maker manuals by other brands

Taurus

Taurus Livorno 6 manual

Delta-q

Delta-q QUICK instruction manual

Bunn

Bunn LCA-1 Installation & operating guide

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Use and care book

Saeco

Saeco Vienna Plus Sup 018M operating instructions

DeLonghi

DeLonghi DC300 Owner's instructions

INCAPTO

INCAPTO BXCO1470E Instructions for use

Bosch

Bosch TASSIMO finesse TAS16B Series user manual

Exido

Exido 245-072 Specifications

Animo

Animo OptiVend Choco user manual

Siemens

Siemens TQ505DF Series user manual

DeLonghi

DeLonghi ECI341 Instructions for use

Krups

Krups KT406511 manual

Cimbali

Cimbali M32 Classic manual

Philips

Philips HL3844N Service manual

Bosch

Bosch TES 515 SERIES instruction manual

Tekmatix

Tekmatix TMFM - 65 Operation manual

Scarlett

Scarlett SC-CM33005 instruction manual