Midea HD-366FWEW User manual
1、尺寸：145*210mm，40P。
2、油墨颜色为黑色:黑白印刷，印刷应清晰，不能有印刷缺陷。
3、切边应成直角，不能歪斜。
4、样板需送设计部门认可方可生产。
(g) scale
1:1
KE
1
16131000015781
HD-366FWEW
HD-423FWE
BCD280 326
英法
黄志胜
曾磊
郝秋霞
2018.11.08
80g双胶纸
Refrigerator-Freezer
HD-366FWEW / HD-423FWE
Dear customer:
Thank you for buying this refrigerator-freezer. To ensure that you get the best
results from your new refrigerator-freezer, please take time to read through the
simple instructions in this booklet.
Please ensure that the packing material is disposed of in accordance with the
current environmental requirements.
When disposing of any refrigerator-freezer equipment please contact your local
waste disposal department for advice on safe disposal.
This appliance must beonly used for its intended purpose.
a) DANGER –Risk of fire or explosion. Flammable refrigerant used. Do not use
mechanical devices to defrost refrigerator. Do not puncture refrigerant tubing.
b) DANGER –Risk of fire or explosion. Flammable refrigerant used. To be
repaired only by trained service personnel. Do not puncture refrigerant tubing.
c) CAUTION –Risk of fire or explosion. Flammable refrigerant used. Consult
repair manual/owner’s guide before attempting to service this product. All safety
precautions must be followed.
d) CAUTION –Risk of fire or explosion. Dispose of property in accordance with
federal or local regulations. Flammable refrigerant used.
e) CAUTION –Risk of fire or explosion due to puncture of refrigerant tubing;
1
Follow handling instructions carefully. Flammable refrigerant used.
CAUTION :
General：
This type of refrigerator-freezer is widely used in places such as hotels,
offices, student dormitories,and houses. It is suitable for refrigerating
and preserving food and beverage. It features the advantages of small
size, lightweight, low electric consumption and easy use.
2
Main Configuration：
The sample outline is representation of this series of refrigerator, which have similar structure and
different capacity.
1、Thermostat
2、Temperature control panel
3、Refrigerator shelf
4、Crisper
5、Adjustable foot
6、Freezer shelf
7、Freezer tray
8、Lamp switch
9、Refrigerator tray
3
UNPACKING YOUR REFRIGERATOR-FREEZER
WARNING: Use two or more people to move refrigerator-freezer. Failure to
do so can result in back or other injury.
Remove tape and any labels from your refrigerator-freezer before using,
Do not remove the rating label..
To remove any remaining tape or glue, rub the area briskly with your thumb.
Tape or glue residue can also be easily removed by rubbing a small amount of
liquid dish soap over the adhesive with your fingers. Wipe with warm water and
dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive
cleaners to remove tape or glue. These products can damage the surface of your
refrigerator-freezer.
When moving the refrigerator-freezer, do not tilt the refrigerator-freezer beyond
45° from upright position.
CLEANING BEFORE USE：
Remove all packaging material, including the foam between the outside
condenser and cabinet. Clean the inside of your refrigerator-freezer thoroughly
before use.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such as gasoline, away form
refrigerator-freezer.
Failure to do so can result in death, explosion, fire or burns .
To ensure proper ventilation for your refrigerator-freezer, allow for 8 inches space
4
on each side between walls, 8 inches space between the back of your refrigerator-
freezer and the wall, and 12 inches space between the counter top and the roof or
ceiling.
If you are installing your refrigerator-freezer next to a fixed wall, leave sufficient
space on the hinge side to allow for the door to swing open.
Never install your refrigerator-freezer near a heat source or in direct sunlight.
5
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTER.
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in death, fire or electrical shock.
Before you move your refrigerator-freezer into its final location, it is important to
make sure you have the proper electrical connection.
Recommended Grounding Method
AC115Volt 60Hz, AC only 10 amp fused and properly grounded electrical
supply is required. It is recommended to use a separate dedicated circuit for this
appliance. Use a receptacle which cannot be turned off with a switch or pull
chain. Do not use an extension cord.
NOTE: Before performing any type of installation, disconnect the
refrigerator-freezer from the electrical source. When you are finished, connect the
refrigerator-freezer to the electrical source and reset the control to the desired
setting.
LEVELING
If the refrigerator-freezer is not leveled during installation, the doors may not
close or seal properly, causing cooling, frost, or moisture problems. It is very
important for the refrigerator-freezer to be level in order to function properly.
To level your refrigerator-freezer you may turn the adjustable foot clockwise
or counter-clockwise to raise or lower the desired side.
/
6
NOTE: Have someone push against the top of the refrigerator-freezer to take
some weight off. This makes it easier to adjust the adjustable foot.
USE OF THE APPLIANCE
To obtain the best possible results from your refrigerator-freezer, it is important
that you operate it properly.
OPERATION
HMI and keys operaon
The keys in HMI and display layout are referred in the following figure：
1.1 Key
A.SET posion set key
1.2 Display screen
①Shi1
②Shi2
③Shi3
④Shi4
⑤Shi5
1.3 Display
◆Once inially powered on，the display screen is on full display for 3s，and then operates as the
displayed middle shi.
◆Normal operaon display
In case of a failure，the appropriate LED light will show in combination with the failure code (in recycling display)；
In case of no failures，the actual operation position of refrigerator will be on display.
1.4 Shiseng
Each time the shift setting key A is pressed once，the shift position changes one time. After the shift setting has been
completed, the refrigerator will operate according to the set value in 5mins.
The shift regulation is：
Shift 1 Shift 2 Shift 3 Shift 4 Shift 5
A ①②③④⑤
7
1.5 Fault indicaon
Display Malfuncon
The LED1 and LED2 lit Refrigerator temperature sensor circuit
The LED1 and LED3 lit Freezer defrost sensor
The LED1 and LED4 lit Ambient temperature sensor
Fresh Food Storage
Wrap or store food in the refrigerator in airtight and moisture –proof material.
This prevents food odor and taste transfer throughout refrigerator.
·Fruit –wash, let dry and store in refrigerator in plastic bags or crisper.
·Leafy vegetables- Remove wrapping and trim or tear off bruised and discolored
areas, wash in cold water and drain. Place in plastic bag or plastic container and
store in crisper.
·Fish–Use fresh fish the same day as purchased.
·Meat –Store most meat in original wrapping as long as it is airtight and
moisture–proof.
Re–wrap if necessary.
·Leftovers –Cover leftovers with plastic wrap or aluminum foil. Plastic containers
with airtight lid can also be used.
Frozen Food Storage
Temperature Control
When using the refrigerator-freezer for the
first time or after defrosting, turn the
temperature control to set “MAX” for at least
8
This manual suits for next models
1
Table of contents
Languages:
Other Midea Refrigerator manuals
Midea
Midea COMPACT Series User manual
Midea
Midea TMF Series User manual
Midea
Midea HS-121LN User manual
Midea
Midea MB112W User manual
Midea
Midea MDRT580MTE Series User manual
Midea
Midea COMPACT HS-57LN User manual
Midea
Midea COMBI Series User manual
Midea
Midea MDRF692MIE User manual
Midea
Midea MRFS5920SSLF User manual
Midea
Midea CO1002 WHITE User manual
Midea
Midea MDRS723MY Series User manual
Midea
Midea UR-BCD280WE-DQ User manual
Midea
Midea HD-332RWEN User manual
Midea
Midea WHS-121LW1 User manual
Midea
Midea MRT18S2ASS User manual
Midea
Midea MRF29D6AST User manual
Midea
Midea HD-423FWWD User manual
Midea
Midea HS-65L User manual
Midea
Midea HD-468RWEN User manual
Midea
Midea MTM258W User manual
