AiroBlue G5-pro Headset User Manual
Nov2006 MICRODIALtd.
3. Re-dialing the last dialed number: Press longer the [volume increase] or [volume decrease] key
Answering an incoming call
Before using the headset to answer an incoming call, make sure that your Headset is connected to your phone and
that the phone has stored the pairing information of the Bluetooth Headset.
1. When there is an incoming call, the ring tone is heard from the Headset and the blue indicator light blinks
quickly. Press the multi-function key shortly and then release to answer the phone.
2. If [automatic answer] function is set on your phone, the Headset automatically answers the call when it
rings
3. If the Headset is off when there is an incoming call, press the multi-function key longer to turn on the
Headset, and then press it shortly to answer the call.
Ending a call
When using AiroBlue G5-pro Bluetooth Headset, you can end a call in any of these ways:
1. Shortly press the multi-function key on the Headset
2. Press the end key on the phone
3. The call will end automatically when the person you are talking to hangs up
Call transfer
1. When having a call, you can transfer the call from the headset to phone in any of these ways:
• Press and hold multi-function button until the Headset beeps 2 times
• Use the relevant button on the phone
• Turn off the Headset
2. Press longer the multi-function button again until you hear another two beeps or use relevant button on
the phone to transfer the call from phone back to the Headset: if the Headset is off, just turn it on and press
shortly the multi-function button
Volume Adjustment
During a call, you can adjust the volume through the volume button
1. Press the [volume increase] button to increase volume
2. Press the [volume decrease] button to decrease volume
Mute
1. During a call, press and hold multi-function button and the [volume decrease] button at the same time
until you hear an inflection, then the microphone will be in the mute mode, and the other side will not be
able to hear your voice.
2. With the Headset in mute mode, do the same was as in step 1 in order to bring the microphone back to the
normal state.
Call reject
When using AiroBlue G5-pro, you can reject calls in any way of the following:
1. Press and hold multi-function button until you hear a long toot.
2. Press the [END] button on the phone
3. The call will end automatically if the other side waits too long.
3-way call
The Headset can support the function of [3-way call] if your SIM card supplier allows this function. When you are
having a call and wanted by another call.
1. Press and hold multi-function button until you hear a beep first and the and inflection thus you can remain
the active call and pick up the latter one.
2. Press shortly multi-function button until the Headset beeps, you can end the active call and pick up the
latter one.
3. Press and hold the [volume increase] button until you hear an inflection, then you can enter a 3-way call:
during the call, press and hold the [volume decrease] button until you hear 2 beeps first and then an
inflection, you can end all calls.
