Mi XMMNTWQ34 User manual
Mi Curved Gaming Monitor 34" User Manual
1
Contents
2
2
2
3
3
4
5
6
6
7
7
7
8
11
11
12
13
Product Overview
Monitor Overview
Package Contents
Installation
Installing the Base
Cable Management
Wall Mount Installation
Instructions
Connections
Button Description
On/O Button
Indicator Status
Menu Description
Precautions
Troubleshooting
10
10
Eye Health
Low Blue Light Description
Specications
Regulatory Compliance Information
Read this manual carefully before use, and retain it for future reference.
2
Function Button
Indicator
Monitor Overview
Package Contents
Stand
Base
Product Overview
User Manual ×1Monitor ×1 Base ×1 Stand ×1
Power Cord ×1 DisplayPort Cable ×1 Hex Studs ×4 Wall Mount
Screws ×4
Thumb Screw ×1
1. Remove the foam-encased component from
the box and place it on a at stable surface. Do
not remove the monitor from the packing foam.
2. Fasten the stand to the base using the
included thumb screw.
4. Attach the stand* by pressing it into the slot
on the back of the monitor until it clicks into
place.
* To remove the stand, press the quick release
button.
Installation
Installing the Base
Do not remove the
monitor from the
packing foam during assembly.
Do not press.
3. Remove the top foam layer and the plastic bag
to expose the mounting point on the back of the
monitor.
Quick
Release Button
3
4
5. Use both hands to carefully take out the fully assembled monitor and place it on a at stable surface.
Note: To avoid damaging the screen, be careful not to press on the LCD screen when standing it up.
Never press on the LCD screen
Cable Management
1. Remove the monitor's cable-management cover and the stand's cover.
2. Feed the power cord and the signal cable through the opening in the stand and connect them to the monitor.
After all cables are in position, install both covers.
Stand Cover
Cable-management Cover
Note: The nameplate of this monitor is near the AC IN port, you can nd it by removing the cable-management
cover.
Wall Mount Installation
1. Press the quick release button to remove the
monitor's stand.
2. Fasten the 4 hex studs to the back of the
monitor in the positions indicated, then
attach the wall mount (sold separately) to
the hex studs (mounting holes are spaced
100 × 100 mm apart).
3. Refer to the instructions of the wall mount to mount the monitor.
Note: Do not press on the LCD screen during the mounting process to avoid damaging the screen.
Note: To reduce the risk of falling down, please properly install the wall-mount and take safety
protection on the monitor to avoid any injury or damage. Do not place anything on top or hang
anything from the wall-mount.
Wall
Wall
Wall Mount
(sold separately)
Monitor Arm Wall Mount
(sold separately)
Quick Release
Button
5
6
Note: The audio output port can only be used for audio output.
Note: This plug ts only into
a grounded electrical outlet.
DisplayPort (1.4): 3440 × 1440, max. refresh rate 144 Hz.
HDMI (2.0): 3440 × 1440, max. refresh rate 100 Hz.
Instructions
1. Connecting the DisplayPort cable (only when using DisplayPort).
a. Make sure the monitor and the computer are both turned o.
b. Connect one end of the DisplayPort cable to the computer's DisplayPort output port, and the other end
to one of the monitor's DisplayPort input ports.
2. Connecting the HDMI cable (sold separately) (only when using HDMI).
a. Make sure the monitor and the computer are both turned o.
b. Connect one end of the HDMI cable to the computer's HDMI output port, and the other end to one of the
monitor's HDMI input ports.
3. Connect a headset or any 3.5 mm compatible external audio device to the monitor's audio output port.
4. Plug both the power cords of the computer and the monitor into a power outlet.
Connections
Note: If the power cord or DisplayPort cable is damaged, it must be replaced with a genuine power cord
or DisplayPort cable purchased from the manufacturer or after-sales service department.
DisplayPort Cable
(DP 1.4)
HDMI Cable
(sold separately)
AC Power Cord
AUDIO AC IN
HDMI 1 HDMI 2 DP 1
(HDMI 2.0) (HDMI 2.0)
DP 2
(DP 1.4)
On
In sleep mode
Lit
Dimmed O
Blinking
Press Turn On/O
Button Description
On/O Button Indicator Status
Button Function
1Menu/Select
2Up
3
4
5
Down
Exit/Go Back
On/O
5
4
3
2
1
7
8
Menu Description
Brightness/Contrast
Picture Quality Settings
Image
Smart Mode
Window Settings
Settings
Brightness
Dynamic Brightness
Black Level
Contrast
DCR
Mi Monitor Standard Mode Enabled
Main Menu Submenu Description Adjustable Range Default
Adjust the monitor's brightness 0-100 80
Dynamic
Brightness
Adjust the monitor's dynamic
brightness
O
Black Level Adjust the monitor's black level 50
Image
Color
Temperature
Adjust the monitor's color
temperature
Standard/Warm/
Cool/Custom
Hue
Saturation
Gamma
Adjust the monitor's response time
Brightness
Contrast
DCR
Aspect Ratio
PQ Settings
Sharpness
Response Time
Noise Reduction
Motion
Response Time
On/O
0-100
Adjust the monitor's aspect ratio
Brightness
/Contrast
0-100 75
OOn/O
Adjust the monitor's contrast
Adjust the monitor's dynamic
contrast ratio (DCR)
0-100
0-100 50
50
1.8/2.0/2.2/2.4/2.6 2.2
Full Screen/16:9/1:1/Auto
0-100 50
High/Medium/Low/O O
High/Medium/Low/O O
OOn/O
Adjust the monitor's hue
Adjust the monitor's saturation
Adjust the monitor's gamma
Adjust the monitor's sharpness
Adjust the monitor's noise
reduction
Reduces motion blur at high
refresh rates
Standard
Full Screen
Smart Mode
Standard Mode Set to standard mode
Only one mode can be
selected at a time
Standard
Mode
Single
Window
Eco Mode Set to eco mode
Game Mode Set to game mode
Movie Mode Set to movie mode
Low Blue
Light Mode
Set to low blue light mode
Window
Settings
Single Window
Select the menu language
Select an input source
Picture-by-
Picture (PBP)
Picture-in-
Picture (PIP)
Settings
RTS
Language
Audio Input
Volume
FreeSync
Information
Restore Factory
Settings
Window 1 Input Source
Window 2 Input Source
Window 1 Input Source
Window 2 Input Source
Window 2 Position
Window 2 Size
English/Español/Русский/
Français/Italiano/Deutsch
/Polski/
English
/
//
/ //
/
HDMI 1/HDMI 2/ DP 1/DP 2
Adjust the monitor's volume
Set to RTS mode
0-100 50
OOn/O
Select an audio input source
Monitor information such as
current resolution/input source
Only display the main window
Display two video inputs side
by side
Display the main window and a
subwindow
9
Main Menu Submenu Description Adjustable Range Default
Other manuals for XMMNTWQ34
1
Table of contents
Other Mi Monitor manuals
