Metrohm 813 User manual

CH-9101 Herisau/Switzerland

Phone +41 71 353 85 85

Fax +41 71 353 89 01

E-Mail [email protected]

http://www.metrohm.com

813 Compact Autosampler

Program version 5.813.0010

Instructions for use

8.813.1003 06.2001 / dm

D. Möckli

Teachware

Metrohm Ltd.

Oberdorfstr. 68

CH-9100 Herisau

1st Edition 2001

This manual was carefully produced. Nevertheless the author does not warrant the

information contained herein to be free of errors. The author appreciates your

comments and feedback.

Printed in Switzerland

Table of content

1Introduction ......................................................1

1.1 Instrument description .................................................................................1

1.2 Parts and controls.........................................................................................2

1.3 Rear view........................................................................................................4

1.4 The keyboard .................................................................................................5

2Installation........................................................6

2.1 Setting up the instrument.............................................................................6

2.1.1 Packaging ..................................................................................................6

2.1.2 Delivery check ............................................................................................6

2.1.3 Location......................................................................................................6

2.2 Mains connection ..........................................................................................7

2.2.1 Setting the mains voltage...........................................................................7

2.2.2 Fuses..........................................................................................................8

2.2.3 Mains cable and mains connection...........................................................8

2.2.4 Switching the instrument on/off..................................................................9

2.3 Attaching the accessories............................................................................9

2.3.1 Connecting the keyboard...........................................................................9

2.3.2 Installing the plug cover .............................................................................9

2.3.3 Installing the needle .................................................................................10

2.3.4 Installing the splash protection ................................................................11

2.3.5 Placing the sample rack...........................................................................12

2.3.6 Adjusting the sample rack .......................................................................12

2.3.7 Tubing connections..................................................................................14

2.3.8 Tubing connection to Metrohm 761 / 790 IC–Systems ...........................15

2.3.9 Tubing connection to a Metrohm 747 VA Stand......................................16

2.3.10

Tubing connection to a Metrohm Computrace 757.................................16

2.4 Instrument connections..............................................................................17

2.4.1 Remote interface ......................................................................................17

2.4.2 Interconnection with Metrohm IC systems...............................................17

2.4.3 Interconnection with a Metrohm 746 VA Trace Analyzer .........................18

2.4.4 Interconnection with a Metrohm 757 VA Computrace .............................19

2.4.5 Interconnection with other instruments ....................................................19

3Operation ........................................................20

3.1 Keyboard functions.................................................................................... 20

3.2 Configuration .............................................................................................. 21

3.2.1 Course of configuration ...........................................................................23

3.3 RAM initialization........................................................................................ 24

3.4 The methods ............................................................................................... 25

3.5 The Metrohm IC control software ............................................................. 27

3.5.1 Operational conditions.............................................................................27

3.6 Modular Metrohm IC System 732/733 ....................................................... 28

3.7 Metrohm 746 VA Trace Analyzer ............................................................... 28

3.7.1 Monitoring ................................................................................................28

3.7.2 Command sequence ...............................................................................28

3.7.3 Conditions to be met ...............................................................................29

4Appendix..........................................................30

4.1 Error Messages........................................................................................... 30

4.2 Sequences................................................................................................... 31

4.3 Technical specifications ............................................................................ 35

4.4 Maintenance and servicing........................................................................ 37

4.4.1 Maintenance by Metrohm service ...........................................................37

4.4.2 Care of the unit.........................................................................................37

4.4.3 Replacing the pump tubing .....................................................................37

4.5 Warranty and conformity ........................................................................... 39

4.5.1 Warranty ...................................................................................................39

4.5.2 Certificate of Conformity and System Validation .....................................40

4.6 Standard equipment ................................................................................... 42

4.7 Optional accessories.................................................................................. 46

5Index................................................................48

Table of Figures

Fig. 1 Side view ........................................................................................................ 2

Fig. 2 Rear view........................................................................................................ 4

Fig. 3 Keyboard........................................................................................................ 5

Fig. 4 Setting the mains voltage .............................................................................. 8

Fig. 5 Keyboard connection..................................................................................... 9

Fig. 7 Installing the splash protection.................................................................... 11

Fig. 8 Sample rack placing .................................................................................... 12

Fig. 9 Installing the pump tubing ........................................................................... 15

Fig. 10 Connection of a 747 VA Stand..................................................................... 16

Fig. 11 Measuring head of the747 VA Stand ........................................................... 16

Fig. 12 Interconnection with 761 or 790 IC System ................................................ 17

Fig. 13 Interconnection with a modular Metrohm IC System .................................. 18

Fig. 14 Interconnection with a Metrohm 746 VA Trace Analyzer ............................. 18

Fig. 15 Interconnection with 757 VA Computrace................................................... 19

Fig. 16 Configuration................................................................................................ 23

Fig. 17 Time program of the IC control software..................................................... 27

1 Introduction

813 Compact Autosampler 1

1 Introduction

1.1 Instrument description

The 813 Compact Autosampler can be used for automat-

ing different tasks, e.g. ion chromatographic determinations with

the Metrohm IC system instruments or voltammetric determina-

tions with the Metrohm 746 Trace Analyzer or 757 VA Com-

putrace . The sample rack provided may hold up to 36 vials of 2.5

or 11 mL volume respectively. Sample tubes made of polypropyl-

ene are standard. To protect the samples from external contami-

nation, the tubes can be hermetically sealed.

Sample introduction from the 813 Compact Autosampler is

achieved by means of its integrated peristaltic pump. The sample

is conveyed by the pump through the capillary into e. g. the sam-

ple loop of the injector located within an ion chromatograph. A

PEEK needle for sealed or a PEEK tube for open sample tubes

can be used alternatively.

Preprogrammed methods for the most common modes of opera-

tion allow to use the 813 Compact Autosampler directly, without

programming effort.

1.2 Parts and controls

2 813 Compact Autosampler

1.2 Parts and controls

DE S F USI B LES DE 250 V

USEONLYWITH 250V

UNIQUEMENT AVEC

FUSES/EMPLOYER

100-120V

220-240V

Metrohm

56 7

Fig. 1 Side view

Safety note:

Never operate the instrument without splash protection and plug

cover being mounted.

The plug cover prevents any contamination of the connectors,

caused by spilled solvents or chemicals.

1 Introduction

813 Compact Autosampler 3

Splash protection 6.2751.040

Must be installed always in operation!

Holding clamp

For locking the tubing cartridge into

place

Needle

PEEK needle 6.1835.020 or PEEK

tube 6.1835.010 or 6.1835.030

Snap-action lever

For releasing the tubing cartridge

Lift

Screw thread for splash

protection

Steel holder 4.766.4330

attached (part of 6.2833.000 Needle

holder)

PEEK capillary 6.1831.060 or

6.1822.410 (1 m or 1.2 m)

For conveying the sample to e.g. an

injection valve

PEEK compression fitting

4.766.4320

for connection of PEEK capillary

(part of 6.2833.000 Needle holder)

Tower

PEEK compression fitting

6.2744.010

Remote connection

PEEK capillary 6.1831.050

(40 cm)

connection needle – pump tubing

Plug cover 6.2752.010

Pump tubing 6.1826.040

For conveying the sample

Fuse holder

Changing the fuses, see section 2.2.2

Screw thread for splash

protection

Mains connection plug

Mains connection, see section 2.2.3

Mounting pin

For attaching the tubing

cartridge

Mains switch

For switching the instrument on/off:

I= ON 0= OFF

Tubing cartridge 6.2755.000

For 6.1826.0X0 pump tubing

6.1826.0X0

Sample rack 6.2041.7500

Pump drive

Roller head with contact rollers

PP sample tube 6.2743.050

(can be sealed with 6.2743.060 PE

caps)

Contact pressure lever

For adjusting the contact pressure

Needle guide

1.3 Rear view

4 813 Compact Autosampler

1.3 Rear view

Made by Metroh m Herisau Switze rland

Keyboard

Type 1.813.

16 16

Fig. 2 Rear view

Mounting screws for

splash protection

Sample rack 6.2041.750

Tubing cartridge

6.2755.000

For 6.1826.0X0 pump tubing

PP sample tubes 6.2743.050

(can be sealed with 6.2743.060 PE

caps)

Mounting screws for

splash protection

Serial number

Tower

Keyboard connection

Plug cover 6.2752.010

Table of contents

Other Metrohm Laboratory Equipment manuals

Metrohm

Metrohm 917 Coulometer User manual

Metrohm

Metrohm 736 GP Titrino User manual

Metrohm

Metrohm Titrino 758 KFD User manual

Metrohm

Metrohm 930 Compact IC Flex ChS/Deg User manual

Metrohm

Metrohm 916 Ti-Touch User manual

Metrohm

Metrohm 862 User manual

Metrohm

Metrohm 760 User manual

Metrohm

Metrohm 663 VA Stand User manual

Metrohm

Metrohm OMNIS 2.1006.00X0 User manual

Metrohm

Metrohm 870 KF Titrino plus Operation instructions

Metrohm

Metrohm 794 Basic Titrino User manual

Metrohm

Metrohm 810 User manual

Metrohm

Metrohm 870 KF Titrino plus User manual

Metrohm

Metrohm Titrando 851 User manual

Metrohm

Metrohm 893 User manual

Metrohm

Metrohm Titrando User manual

Metrohm

Metrohm 942 Extension Module Vario LQH User manual

Metrohm

Metrohm 940 Professional IC Vario Series User manual

Metrohm

Metrohm 917 Coulometer User manual

Metrohm

Metrohm 728 User manual

Metrohm

Metrohm 942 Extension Module Vario LQH User manual

Metrohm

Metrohm 889 User manual

Metrohm

Metrohm 6.2841.120 User manual

Metrohm

Metrohm 800 Dosino User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide