7
Main Control Menu
The control board on the fixture base is your interface
to access and control all the functions on the unit. Its
dipswitch interface ives you a code view of the op-
tions. The followin will explain each function and its
options.
001
002
004
008
016
032
064
128
256
ON
DMX
1 2 3 4 5 6 7 8 9 10
001
002
004
008
016
032
064
128
256
1 2 3 4 5 6 7 8 9 10
DM Addressing
Turn dipswitch 10 to the Down position. Each dipswitch from 1 to 9 holds
a numerical value located below the dipswitch. Add the numerical value to
et the desired fixture start address channel. The user must assi n a
start address on the fixture that indicates the first channel reserved in the
controller.
For example, if you wish the first unit to start on address channel 85 you
will need to turn on dipswitch 1,3,5 and 7 (1+4+16+64=85)
ON
DMX
001
002
004
008
016
032
064
128
256
FUN
1 2 3 4 5 6 7 8 9 10
ON
Functions
Turn dipswitch 10 to the UP position. This function will turn on the func-
tions that will allow the unit to run a prepro ram function. Additionally, this
unit may serve as a master unit where other units will copy it’s functions.
To create a master unit connect the XLR cable from the output to the in-
put on the next unit. And address the next unit as fixture 1.
INPUT OUTPUT
FUNCTION 1 2 3 4 5 6 7 8 9 10
RED ON
GREEN ON
BLUE ON
STROBE SLOW MID FAST FASTEST ON
COLOR FADE SLOW MID FAST FASTEST ON
COLOR SNAP SLOW MID FAST FASTEST ON
CHASE LIGHT SLOW MID FAST FASTEST ON
SOUND ACTIVATED RAINBOW ON
DM 1 2 4 8 16 32 64 128 256 ON
