Maxim LAUNDRY PRO MPIBS User manual

Professional Ironing Board System

User Manual

Model Number: MPIBS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT

Read and follow the instructions in this user manual even if you feel you are familiar with the product, and

find a place to keep it handy for future reference.

For your convenience record the complete model number (located on the product identification plate) and

the date you received the product, together with your purchase receipt and attach to the warranty and

service information. Retain in the event that warranty service is required.

NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading

tests. Normal use or the use of other recommended attachments may draw significantly less power.

IMPORTANT SAFEGUARDS

When using any electrically powered product, basic safety precautions should always be followed,

including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT

WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:

•Read all instructions before operating the Iron for the first time and save for future reference.

•Always turn the power off at the power outlet before you insert or remove the plug. Remove by

grasping the plug –do not pull on the cord.

•Always turn the power off and remove the plug when not in use and before cleaning.

•Always use the iron from a power outlet of the voltage marked on the appliance.

•Do not leave the iron unattended while in use, or when it is plugged into a power outlet.

•Do not leave a hot iron within reach of children. If children come into contact with a hot iron, it could

lead to serious burns.

•Use this iron on an ironing board only.

•Do not wind the cord around the iron soleplate while it is still hot.

•An iron takes approximately 30 minutes to cool down. The iron must be completely cooled before

storing.

•The iron must be used and rested on a stable surface. If the iron is rested on its stand, ensure the

surface is stable.

•Always place the unit where the floor is flat, even and stable surface. Otherwise, it could tip over.

•As necessary, place the appliance upon an underlay, in order than no surface damage occurs.

•Do not use your unit if it has been dropped, if there are visible signs of damage or if it appears to be

leaking.

•Never use the iron if it is damaged. Always have it repaired or inspected by an authorized technical

outlet in order to avoid risks of any kind. The iron is not to be used if it has been dropped, if there

are visible signs of damage or if it is leaking.

•The appliance is not intended for use by persons (including children) with reduce physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure they do not play with the appliance.

•Close supervision is necessary for this appliance being used by or near children. Do not leave iron

unattended while connected or on an ironing board.

•Never leave the unit within the reach of children when it is hot and ensure that they are not able to

pull on the mains cord.

•Irons develop high temperatures and hot steam, which may cause burns.

•Always warn other users of the potential dangers (emissions of steam, hot water, hot soleplate, etc).

•Warning: Burns can occur from touching hot metal parts, hot water, or steam. Hot water may

leak from the iron. Use caution when filling or turning the steam iron upside down.

•Care should be taken when using the appliance due to the emission of steam. To protect against

burns or injury to persons or animals, do not direct steam towards the body when ironing. Never iron

clothing while it is being worn and never treat it with steam while it is being worn.

•Do not use this appliance for any purpose other than its intended use.

•Do not let the power cord hang over the edge of a bench top or table or touch any hot surface.

•Do not place the appliance on or near a hot gas flame, electric element or on a heated oven.

•Do not use the iron with an extension cord.

•Do not immerse the appliance in water or any other liquid. Keep the product away from moisture.

•Only connect the unit to a grounded socket, which corresponds to the technical data of the unit.

•Do not disassemble the product. Only have repairs conducted by the manufacturer, its service

agent, or a similarly qualified person.

•Only use the device, if it has been properly assembled.

•Remove the mains plug from the socket when you do not plan to use the device for a longer period

of time, before a storm, during filling and before you clean it.

•Only have a damaged connecting cable repaired by the manufacturer, its service agent, or a

similarly qualified person.

•Ensure that the main cord cannot come into contract with hot surfaces. Always deactivate the iron

and disconnect the mains plug from the socket before you fill it with water or drain out the leftover

water. Be careful when draining out the hot water in order to avoid burns.

•The boiler water tank is equipped with a safety cap. It cannot be opened as long as the water in the

generator is very hot. When draining out the remaining water from the generator, the water may still

be particularly hot. Danger of scalding! If the safety fixtures do not function properly, immediately

stop the unit.

•The fill opening may not be opened during use.

•Always set the deactivated iron, which is still warm, on the extended iron platform during brief

pauses in use. Otherwise, there is a fire hazard!

•Always deactivate the iron before you insert the mains plug in the socket or pull it out by turning the

temperature control for the iron to “MIN”.

•Turn the temperature control to the “MIN” position in order to deactivate the iron.

•Fil the generator water tank preferably with distilled water. Ensure that the quantity of water in the

tank in the tank is never greater than 1000ml.

•Never fill the generator with cleanser or other additives. They may irreparably damage the unit and

as such, the safe operation of the unit can no longer be assured.

•If no more steam is emitted, immediately shut the device off. Never leave the cleaner on when the

water tank is empty.

•In order to keep the iron in good condition, release the internal pressure by pressing the steam

button on the iron and pull the mains plug out of the socket each time after you have finished

ironing. Unscrew the safety cap after a prolonged cooling period and carefully drain the remaining

(hot) water. Danger of scalding!

•This appliance is not intended to be operated by means of an external timer or separate remote

control system.

•Do not operate any electrical appliance with a damaged cord or plug. If the supply cord is damaged,

it must be replaced by the manufacturer, its service agent, or a similarly qualified person.

•This appliance is intended to be used in household and similar applications such as: staff kitchen

areas in shops, offices and other working environment; farm houses; by clients in hotels, motels and

other residential type environments; bed & breakfast type environments.

•The installation of a residual current device (safety switch) is recommended to provide additional

safety protection when using electrical appliances. It is advisable that a safety switch with a rated

residual operating current not exceeding 30mA be installed in the electrical circuit supplying the

appliance. See your electrician for professional advice.

•ATTENTION: The steam may not be pointed directly at equipment containing electrical components

(e.g. the inside of ovens, fridges, switches and lights, microwaves etc.).

•Please note: This appliance is equipped with 4 separate on/off switches, one on the iron

(temperature control), another one on the control panel of the and two other switches on the

generator (iron switch and steam switch). Ensure that you turn off all switches and disconnect the

mains cord with the socket if the iron is not being used.

Meaning of the symbols on the device and in this manual:

All safety notices are marked with this symbol. Carefully read through it and follow these safety

notices in order to prevent injury to other persons or property.

Tips and recommendations are marked with this symbol.

Safety Note:

This unit operates with hot water vapour!

FEATURES

ACCESSORIES

STEAM GENERATOR STRUCTURE

OPERATING THE IRONING STATION

ASSEMBLY INSTRUCTIONS

Unfold the Board:

1. Set the ironing board upright (Fig.1)

2. Hold the right side of the ironing board with your right hand, the left side with your left hand, also see Fig.2.

(to fold out the board, lift it swiftly with left hand while simultaneously pressing down with the right).

Cloth Basket:

3. Mount the two short clothes hangers (A) on the chassis as depicted in Fig.3.

4. Hang the clothes basket connection on the fixed clip on the clothes basket as shown in Fig.4.

5. Mount the two long clothes hangers (B) on the carrier on the chassis (Fig.5).

6. The clothes basket, which has been mounted, is shown in Fig.6.

Cloth Hanger:

7. Screw the supporting pole into the threading located on the side of the ironing board (fig.7.) And use the

tool to fix the support pole (Fig.7a).

8. Unfold the two fixing rails of the clothes hanger into the recesses on the main clothes hanger rail. Then

insert the clothes hanger onto the supporting pole (Fig.8.).

Iron Storage Box:

9. Lift the iron platform up as far as possible (Fig.9). Lay it flat (Fig. 9a). And take the iron out of iron box. (Fig.

9b). Put it on the platform (Fig. 9c).

Steam Generator:

10. If the generator is not yet mounted on the chassis, mount it by pushing it onto the two metal plates located

on the chassis (Fig.10).

11. Connect the plug for the fan with the corresponding port on the back of the generator (Fig.10a).

Sleeve Board

1. Screw the knob tightly to fixed the sleeve board.

Garment Steamer:

1. Put the garment steamer on the fixing hanging seat which is on the

supporting pole.

BEFORE FIRST USE

•Remove any stickers, plastic covers or cardboard from the soleplate. Ensure that all adhesive is

removed from the soleplate before switching the iron on.

•NOTE: When the iron is turned on for the first time, it may give off vapours/smells for up to 10

minutes. This is due to the initial heating of the components used. It is safe, and will not affect the

performance of the iron, or reoccur.

INSTRUCTIONS

Fill Water:

1. Open the safety cap, and fill water less than 1000ml.

Note: Please don’t fill water more than 1000ml, or the iron will drop water. So

every time you finish ironing, don’t forget to drain out remain water.

Iron Use:

1. After you have added water to the generator, close the cap (Fig.1).

2. Insert the quick connector to the steam outlet “I” of generator (Fig. 2 &

Fig.3).

3. Connect the unit with a socket, switch on the power switch and the iron

switch “I” on the generator.

4. At the beginning, set the iron’s knob in “MAX” position to make the iron

can reach enough temperature, or it will drop water.

5. If the control light is illuminate on the generator, it is heating after a few

minutes, the light is out, it means the steam is ready, so you can use the

iron and set a suitable temperature with iron’s temperature knob.

6. Press the button to release steam. Press and push the button a little

forward to lock for hand free steaming.

Note:

1. As there is a fogging agent inside the iron, the fogging agent will make your

clothes dirty, so before you begin to iron clothes, please push the steam

button to let steam come out for few seconds, and then you can iron

clothes.

2. After you finish ironing and unplug the power switch, put the iron on the

iron platform, there will be water come out the iron as cool down.

Garment Steamer Use:

1. Insert the garment steamer’s quick connecter into the steam outlet “II” of

generator.

2. Connect the unit with a socket, switch on the power switch and the

garment steamer switch “II” of generator.

3. At the beginning, the control light is illuminate on the generator, when

the light is out, the steam is ready, they you can use the garment

steamer.

4. Set a suitable steam with garment steamer’s steam control button.

Table of contents

Other Maxim Iron manuals

Maxim

Maxim DIR501 User manual

Popular Iron manuals by other brands

Clatronic

Clatronic DB 3703 instruction manual

TEFAL

TEFAL FV4093Z0 manual

Gorenje

Gorenje SIH 2200 BS instruction manual

Philips

Philips GC6012 Service manual

Bosch

Bosch 2 Series operating instructions

Riffel

Riffel Catena KB-819 instruction manual

Texi

Texi Hestia Instructions for use

Maxwell

Maxwell MW-3010 Manual instruction

TREVIDEA

TREVIDEA Girmi ST60 user manual

Philips

Philips HI5914/30 quick start guide

Primula

Primula Vapormat instruction manual

Magio

Magio MG-541 manual

Scarlett

Scarlett SC-1334S instruction manual

Bosch

Bosch Sensixx B22L manual

Philips

Philips GC651 Specifications

Vitek

Vitek VT-1247 VT Manual instruction

Cleanmaxx

Cleanmaxx 3397 instruction manual

Philips

Philips GC800 user manual