Manitou MRT Series User manual
Quick Reference guide for
Manitou ST3 Rotational Telehandler
21.50, 24.50 non add Blue
Contact
Paul Orange –07711 957985 (North)
Chris Moisey - 07711 957974 (South)
HANDOVER GUIDE
2
HANDOVER GUIDE
The MRT + PRIVILEGE telehandler can work with a comprehensive range of
attachments, combining lift, offset and rotation functions within the same
machine, and enabling the use of the machine in static mode with stabilisers.
The range meets fully all the challenges with working at great heights in
cramped sites.
Thisistrulya3-in-1machine:
Telescopic/Crane/Platform
3
MRT /MRT-X PRIVILEGE
MRT 1850 + MRT 2150 + MRT 2540 +
- MRT-X 2150 + MRT-X 2540 +
Machine weight with standard attachment (transport position):
Unladenweight 15350kg 16410kg 17165kg
Nominal laden weight 20 349 kg 21 409 kg 21 165 kg
Maximumloadoneachstabiliser 10600kg 11500kg 10600kg
Maximumloadpertyre 8900kg 9050kg 8600kg
Traction force 8 200 kg 8 200 kg 8 200 kg
Weight distribution per axle:
Frontaxle 7620kg 7810kg 8135kg
Rearaxle 7730kg 8600kg 9030kg
Dimensions:
Overall width 2.43 m 2.43 m 2.43 m
Overall length 6.06 m 6.78 m 7.82 m
Overallheight 3.05m 3.05m 3.05m
Ground clearance 0.37 m 0.37 m 0.37 m
MRT 1850+ 2150+ 2540+
MRT-X 2150+ 2540+
mm
A1200
A1 150
A2 1320
A3 50
B290
C577064907530
D 5050
E1155
F2750
G1155
H380
I2485
J 3110
K24852985
K1 -- 485
L1930
mm 2425
N4700
O5100
P150
Q4500
R3800
S4550
T4040
U564062306700
V950
Y12°
Z105°
DIMENSIONS AND WEIGHTS
4
1
2
METHODOLOGY
THEMAINSTAGESINTHEHANDOVERPROCESS
LEFT SIDE
REAR
Hydraulic oil tank and its access cover
Hydraulic oil lling access
Air conditioning radiator
located under the roof cap
Steering cylinder inside
and above the axle
Rear axle locking
cylinders
Fueltankanditsaccesscover
(differentfromthehydraulicoilaccesscover)
*according option
5
3
4
FRONT
Quick coupler (manual locking bolt
or hydraulic locking *)
Attachments (if required)
Safety sleeve (to lock the lifting
cylinder)
Tilting corrector
Telescopic stabilisers
Engine oil
level
Oil lter
Coolant level
Air lter under
the cover
Battery
Fuel pre-lter
and lter
Engine oil ller port
*according option
ENGINE COMPARTMENT – RIGHT SIDE
6
JOYSTICKS
METHODOLOGY
Control wheel for attachment
hydraulic line movements
Speed control validation
button (use F4 screen)
Warning! This switch cuts the attachment
line movements off
Attachment movement selector
Switch:
FORWARD GEAR
REVERSE GEAR
NEUTRAL
Check that the machine
is in neutral before
starting the engine
Press the dead man’s button to
validate the movement command
(one per joystick)
7
CABINE
7
6
2
5
4
3
2
2
1
1
CABIN
1
Dashboard
2
Joysticks
3
Load charts
4
Emergency box
5
Switch panel (overhead right)
6
Turret locking lever: must be on when
transporting the machine or in travel mode
7
Heating and air conditioning*
1
Platform emergency key: it allows another operator, in the event of impairment of the platform
occupant, to start the engine and operate functions from the cabin, TURN THE KEY AND PRESS
THE RED BUTTON (
1
) AT THE SAME TIME (the key is in the emergency box located on
the cabin’s right pillar, next to the seat; break the glass using the hammer provided).
2
LMI shunt key: to deactivate the safety, the operator must turn / press and hold the key.
FOCUS
*according option
F1
F2
1 2
1 2
8
345
3
4
5
DASHBOARD DISPLAY
Select the total load of the attachment
Resetting of the partial hour counter
Escape key
Confirm the attachment
FOCUS
Axle alignment and steering mode
indications
Turret alignment indication.
When the icon is displayed, the turret
can be locked using the lever located
totherightoftheseat.
When the turret is aligned, the turret
alignment icon is on:
Load level indication
Red: maximum load allowed in the
current position
Green: actual load lifted
Stabiliser mode indication (example
shown: fully extended and down)
Set the position of the load in space
F3
F5
9
F4
Working zone limits: the yellow icons
indicate that the zone limit has been
reached. The conguration is carried
out by setting the machine in the
required maximum position and
pressingF6toF10keys
Retrievalofspeedsfrommemory
aspercentageoftheboom
hydraulic speed
Display of attachment recognition
by machine
Conguration screen for maximum
speeds of the boom’s hydraulic
movements. Use F6 to F9 to select
the required line, and modify the value
bymovingthejoystickandvalidating
the percentage with the red button
in the right joystick. The parameters
will be displayed on F3 page.
F10 allows resetting movements
to 100%
Error diagnostics screen
This manual suits for next models
6
Table of contents
Other Manitou Forklift manuals
Manitou
Manitou M Turbo Series User manual
Manitou
Manitou MLT625-75 H S1-E3 User manual
Manitou
Manitou MC 30 Turbo Serie 3-E3 User manual
Manitou
Manitou MI 15 D User manual
Manitou
Manitou Privilege MRT-X 3255 PLUS User manual
Manitou
Manitou 200 ATJ User manual
Manitou
Manitou 78 SEC 2 User manual
Manitou
Manitou M26-2 D ST5 S1 EU User manual
Manitou
Manitou MHT 790 104JD H ST4 S1 User manual
Manitou
Manitou MT 1436 R PRIVILEGE User manual
Manitou
Manitou MT6642XT User manual
Manitou
Manitou MI 20 D K ST5 S1 User manual
Manitou
Manitou 160 ATJ RNC 4RD ST5 S1 User manual
Manitou
Manitou MT 732 EASY 75D ST3B S1 User manual
Manitou
Manitou MT 1440 E3 User manual
Manitou
Manitou MRT 1840 Easy Instruction Manual
Manitou
Manitou TMT 25 I K ST5 S1 User manual
Manitou
Manitou ME 418 48V S3 User manual
Manitou
Manitou MSI20 T 4ST3B User manual
Manitou
Manitou MSI 40 T S3 ST3B User manual
