Manhattan 432344 User manual

LCD Monitor arM

QUiCK inStaLL GUiDE

Model 432344

MH-432344-miniQIG-1009-01

Thank you for purchasing this MANHATTAN®LCD

Monitor Arm, Model 432344.

Three xed vertical and ve angular arm settings

with tilt, rotate and side-to-side adjustments enable

a comfortable and productive viewing position.

Instructions are on the back of this sheet.

MANHATTAN®offers a complete line of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information or visit us online at

www.manhattan-products.com

All products mentioned are trademarks or registered trademarks of their respective owners.

GENERAL

• Fits 75 x 75 mm / 100 x

100 mm VESA-compliant

monitors up to 22”

• Monitor weight capacity:

up to 10 kg (22 lbs.)

• Installs on horizontal

surfaces up to 9 cm (3.5

in.) thick

DIMENSIONS

• Height: 50 cm (19.75 in.)

• Weight: 3.7 kg (8.1 lbs.)

• Arm length, overall:

310 cm (12 in.)

PACKAGE CONTENTS

• LCD Monitor Arm

• Installation hardware with

instructions and hex tool

SPECIFICATIONS

• Optimize ergonomics and monitor view with tilt, rotate, side-to-side

and three height adjustments

• Steel construction with heavy-duty clamp mounts to desktop or other

horizontal surface — no drilling required

• Meets VESA standards — ts monitors up to 22” and up to 22 pounds

• Lifetime Warranty

1. Check that the package contains the

components shown here.

ASSEMBLY INSTRUCTIONS

Mounting arm/

bracket

Mounting

clamp/bracket

Bracket

cover

Hex

wrench

Cable support

(beneath arm)

Monitor

mounting

screws (4)

2. Using 2 of the large, hex-head clamp mounting screws, attach the

mounting clamp/bracket to the mounting arm, placing the screws in the

pair of holes that best accommodate the mounting surface. Secure the

mounting clamp/bracket assembly to the mounting surface.

3. Remove the arm cover and position the mounting arm at the desired

angle (see below) by aligning the holes in the arm to those in the bracket;

secure the arm in place using the remaining 4 hex-head screws.

4. Align the holes in the mounting arm/bracket with those on the LCD

monitor and secure the monitor to the bracket using the four included

monitor mounting screws.

5. Tuck loose cables inside the cable support and, if desired, run through

the opening in the bracket cover.

Always handle the LCD monitor with care during assembly

of this Monitor Pole. Disconnect any cords or cables that

could otherwise interfere with the placement of any of the

components, and make sure that any screws and clamps

are properly tightened to prevent possible damage to the

monitor or nearby items. After assembly, periodically check

the clamps to ensure no slippage or loosening has occured

that could result in monitor damage.

6. Position the LCD monitor for the desired

viewing angle. Pry off the snap-on covers

from the adjustable joints on the mounting

arm and use the included hex wrench to

tighten the joints to suit your preferences.

Clamp

mounting

screws (6)

Other Manhattan Rack & Stand manuals

Manhattan

Manhattan 461306 User manual

Manhattan

Manhattan 462242 User manual

Manhattan

Manhattan 461528 User manual

Manhattan

Manhattan 460941 User manual

Manhattan

Manhattan 461788 User manual

Manhattan

Manhattan 424820 User manual

Manhattan

Manhattan 461894 User manual

Manhattan

Manhattan 461351 User manual

Manhattan

Manhattan 461290 User manual

Manhattan

Manhattan 461825 User manual

Manhattan

Manhattan 424868 User manual

Manhattan

Manhattan 432351 User manual

Manhattan

Manhattan 462259 User manual

Manhattan

Manhattan 462303 User manual

Manhattan

Manhattan 461580 User manual

Manhattan

Manhattan 461184 User manual

Manhattan

Manhattan 461566 User manual

Manhattan

Manhattan 462211 User manual

Manhattan

Manhattan 461849 User manual

Manhattan

Manhattan 423670 User manual

Manhattan

Manhattan VeriFone VX 520 User manual

Manhattan

Manhattan 461603 User manual

Manhattan

Manhattan 461221 User manual

Manhattan

Manhattan 422840 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 