Manhattan 432351 User manual

LCD WaLL Mount

QuICK InStaLL GuIDE

Model 432351

MH-432351-miniQIG-1009-02

Thank you for purchasing this MANHATTAN®LCD

Wall Mount, Model 432351.

Fully adjustable tilt, rotate, side-to-side and tension

settings allow a single LCD display to be reliably

secured and positioned for a comfortable viewing

position.

Instructions are on the back of this sheet.

MANHATTAN®offers a complete line of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information or visit us online at

www.manhattan-products.com

All products mentioned are trademarks or registered trademarks of their respective owners.

GENERAL

• Fits 75 x 75 mm / 100 x 100 mm

VESA-compliant monitors up to 22”

• Monitor weight capacity: up to 12 kg

(26 lbs.)

• Installs approximately 12.5 cm (5 in.)

from most vertical surfaces

DIMENSIONS

• Bracket dimensions: 8 x 6.5 cm

(3.15 x 2.5 in.)

• Arm length: 12.5 cm (5 in.)

• Weight: 0.7 kg (1.5 lbs.)

PACKAGE CONTENTS

• LCD Wall Mount

• Installation hardware with instructions

SPECIFICATIONS

•Optimizes monitor view with tilt,

rotate, side-to-side and tension

adjustments

•Two-piece bracket with heavy-duty, steel construction

easily mounts to most vertical surfaces

• Meets VESA standards — ts monitors up to 22” and up to

26 pounds

•Lifetime Warranty

ASSEMBLY INSTRUCTIONS

Bracket-

mounting

anchors

and screws

(2 ea.)

Open-end

wrench

Mini-level

Display-

mounting

screws (4)

4. Slide the wall mount with monitor attached into the bracket

already secured to the vertical surface, then tighten the

wall bracket knob (it should align with the center hole).

Always handle the LCD monitor with care during assembly

of this LCD Wall Mount. Disconnect any cords or cables

that could otherwise interfere with the placement of any

of the components, and make sure that any screws and

bolts are properly tightened to prevent possible damage to

the monitor or nearby items. After assembly, periodically

check the ttings to ensure no slippage or loosening has

occured that could result in monitor damage.

5. Position the monitor to suit your viewing preferences,

then tighten the joints (remove the snap-on covers to

access the bolt heads as shown).

Wall mount

with bracket

1. Check that the package contains the components shown here.

2. Using the mini-level

as shown, position

the wall bracket

against the vertical

mounting surface

and mark the

positions of the two

bracket holes.

Punch or drill pilot/

starter holes, if/as

needed, then use

either the 2 bracket-

mounting anchors or

screws included in this

package to secure the bracket

to the vertical surface.

3. Making sure

the wall mount

is right-side up

(to t into the

wall bracket),

align the holes

in the display

bracket with

those on the

LCD monitor

and secure

the monitor

to the bracket

using the four

display-

mounting

screws.

Table of contents

Other Manhattan Rack & Stand manuals

Manhattan

Manhattan 461849 User manual

Manhattan

Manhattan 461627 User manual

Manhattan

Manhattan 423670 User manual

Manhattan

Manhattan 424820 User manual

Manhattan

Manhattan 462204 User manual

Manhattan

Manhattan 462112 User manual

Manhattan

Manhattan 424509 User manual

Manhattan

Manhattan 460941 User manual

Manhattan

Manhattan 423380 User manual

Manhattan

Manhattan 461221 User manual

Manhattan

Manhattan 461788 User manual

Manhattan

Manhattan 424868 User manual

Manhattan

Manhattan 420808 User manual

Manhattan

Manhattan 461498 User manual

Manhattan

Manhattan 461603 User manual

Manhattan

Manhattan 423786 User manual

Manhattan

Manhattan 461252 User manual

Manhattan

Manhattan 461993 User manual

Manhattan

Manhattan 424851 User manual

Manhattan

Manhattan 461078 User manual

Manhattan

Manhattan 461566 User manual

Manhattan

Manhattan 462419 User manual

Manhattan

Manhattan 461122 User manual

Manhattan

Manhattan 424752 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 