MacDon FlexDraper FD1 Series User manual

Featuring MacDon FLEX-FLOAT Technology

™

The harvesting specialists.

FD1-Series

FlexDraper®Combine Header

Operator’s Manual

147831 Revision A

2016 Model Year

Original Instruction

IMPORTANT: PAGE 29 HAS

BEEN UPDATED SINCE THIS

MANUAL WAS PUBLISHED.

FD1-Series FlexDraper®Header for Combines

Published: April 2016

Declaration of Conformity

147831 iRevision A

147831 iiRevision A

147831 iii Revision A

147831 ivRevision A

Introduction

This instructional manual contains information on the FD1-Series FlexDraper®and the FM100 Combine Float

Module. It must be used in conjunction with your combine operator's manual.

The FD1-Series FlexDraper®is specially designed to work well in all straight cut conditions, whether cutting on or

above the ground, using a three-piece ﬂexible frame to closely follow ground contours.

Carefully read all the material provided before attempting to use the machine.

Use this manual as your ﬁrst source of information about the machine. If you follow the instructions provided, your

header will work well for many years. If you require more detailed service information, a technical manual is available

from your MacDon Dealer.

The Table of Contents and Index will guide you to speciﬁc areas of this manual. Study the Table of Contents to

familiarize yourself with how the information is organized.

Keep this manual handy for frequent reference and to pass

on to new Operators or Owners. A manual storage case is

located inside the header left endshield.

Call your MacDon Dealer if you need assistance,

information, or additional copies of this manual.

Figure 1: Manual Storage Location

147831 vRevision A

Model and Serial Number

Record the model number, serial number, and model year of the header, combine ﬂoat module, and

transport/stabilizer wheel option (if installed) in the spaces provided.

NOTE:

Right-hand (RH) and left-hand (LH) designations are determined from the operator’s position, facing forward.

FlexDraper®Header

Header Model:

Serial Number:

Year:

The serial number plate (A) is located beside the knife

drive motor on the left-hand endsheet.

Figure 2: Header

Combine Float Module

Float Module

Model:

Serial Number:

Year:

The serial number plate (A) is located on the underside

of the reservoir at the right end.

Figure 3: Float Module

Slow Speed Transport/Stabilizer Wheel Option

Serial Number:

Year:

The serial number plate (A) is located on the right-hand

axle assembly.

Figure 4: Transport/Stabilizer Option

147831 vii Revision A

Other manuals for FlexDraper FD1 Series

Table of contents

Popular Farm Equipment manuals by other brands

GSi

GSi PNEG-2314 installation manual

Checchi & Magli

Checchi & Magli TEXDRIVE owner's manual

Amazone

Amazone Cenius 4003-2TX operating manual

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Operator's manual

Cima

Cima BLITZ Maintenance Instruction

Amazone

Amazone CombiDisc 3000 Original operating manual

HE-VA

HE-VA Disc-Roller XL Contour Operating instructions/spare parts list

AGT

AGT AGT-SSFM product manual

Milestone

Milestone 72-84 manual

KUHN

KUHN Hector 3000 Complementary instructions

Krone

Krone X-Disc 6200 operating instructions

Eliet

Eliet DZC450 manual

Taarup

Taarup BIO+ B4000 Operator's manual

Garland

Garland SHAKER 310 DPG instruction manual

stable comfort

stable comfort StableWall System installation guide

Raven

Raven AccuBoom installation manual

International

International 710 Operator's manual

Ashland

Ashland HDW-3217-14 parts manual