Luxli Taiko User manual
USER MANUAL
2
Conduct an orchestra of lights.
Precautions
The Luxli Orchestra series can produce a dazzling symphony of light.Synchronize LED light units of
all sizes,choose from millions of possible colors, apply lighting effect from four selectable modes,
and control them instantly with the powerful Composer mobile app.
The Taiko is a true 2 × 1 multicolor LED light that features a highly accurate and versatile RGBAW
LED panel.It offers CCT,Filter, RGB,and Special Effects operating modes that provide remarkable
control over each variable with an easy-to-use interface.The light is equipped with Bluetooth
4.2 LE that pairs with your tablet or smartphone the moment you open Luxli’s Composer mobile
app. DMX 512 support features master/slave mode that allow you to attach up to 512 Taikos
and other compatible Orchestra-series lights,and control all the operation modes from a single
unit.Whether controlled via the app, the intuitive interface on the unit itself, or DMX, the Taiko will
illuminate your creative vision with endless possibilities.
For the latest version of the Composer mobile app,rmware updates,as well as videos and ideas
for creative uses for the Taiko, visit luxlilight.com.
• Keep this product away from water and ammable gases or liquids.
• Use only the correct, recommended voltage.
• Do not attempt to disassemble or repair this product.
• Clean this product with only a soft, dry cloth.
•
To avoid damage to this product, be careful not to overtighten or improperly thread any of
the threaded ttings.
• All images are for illustrative purposes only.
3
Troubleshooting
• If you encounter any problems, rst try turning the device off and then on.
• If the problem persists, remove the batteries or power supply for 15 seconds, and then restart.
•
Go to luxlilight.com to make sure you have the most recent rmware update. If a new rmware
version is available, follow the instructions on how to download it to your light.
4
Overview
Back:
1. V-Mount battery plate
2. Tilt control screw
3. Power input
4.
Micro-USB port for firmware updates
(visit luxlilight.com for details)
5. 5/8 in. receiver
Also included:
• ORC-TAIKO-D90 Diffusion panel
• Power supply with power cord
6. Locking handle
7. Outer mounting screw
8. Center mounting screw
9. 5-pin DMX in/out
10.Tilt lock handle
11.Adjust height hex screws
• Photometric calibration results data sheet
• QuickStart guide
3 5 6 7 84
1
9
11
2
10
5
Control Panel:
12.Brightness dial
13.Power button
14.Mode selector
Top:
18.Diffuser ap
19.Thumb tab
15.LCD screen
16.Function buttons
17.Adjustment dial
20.Barndoor slot
21.Diffuser slot
MODE
32%
3900K
+/- GREEN
0%
CCT
32% 14.4V 14.4V
32%
3900K
CCT
32% 14.4V 14.4V
+/- GREEN
0%
12 13 14 15 1716
1918 2120
6
Setting up the Taiko
Attaching the Tilt Lock Handle
The tilt lock handle can be attached to either side of the Taiko.To attach the handle, follow these
steps:
1. Place the Taiko and yoke down on a at surface.
2.
Use the included hex key to remove one of
the tilt control screws, and replace it with the
tilt lock handle. Screw in the handle so the
threads are engaged, but don’t tighten it.
3. Use the hex key to tighten the control screw
on the other side of the yoke. Tighten it
enough until there is some resistance while
tilting the Taiko in the yoke.
4.
Tighten the handle until the yoke is locked
and secure.
Note: If the yoke seems too lose when the tilt lock handle is disengaged,use the hex key to slightly
tighten the control screw opposite the handle.
Mounting the Taiko to a Light Stand
Loosen the mounting lock and place the receiver over the light stand’s 5/8” pin.Tighten the
handle until secure.
Note: If you’re unable to turn the tilt lock handle 360°, pull the handle out, reposition it, and push
it back in until it reengages.
7
Reversing the Receiver’s Locking Handle
For mounting and handling convenience, you can change the side the locking handle is on:
1.
Remove the Taiko from the light stand and
place it down on a at surface.
2.
Use a hex key to unscrew the center and
outer mounting screws.
3.
Turn the receiver so the handle is on the
opposite side.
4.
Replace the center and outer mounting
screws. Make sure the mounting screw is in
the center of the receiver, and the stabilizer
screw is on the side.Tighten until rm.
Install/Remove the Diffuser
The Taiko includes a medium-density diffuser. Light- and heavy-density diffusers are also available
separately.
1. Press the thumb tabs,and lift up the diffuser
ap.
2. Slide the diffuser in or out of the diffuser slot.
3.
Close the diffuser ap so it’s held in place by
the thumb tabs.
8
User Interface
Power Button
Press to power on or off.
The Taiko powers on to the last screen that was used.
The Taiko recalls the last settings in CCT, RGB, Filter, and Special Effects mode.
To use the factory presets, see Main Menu/Presets Menu below.
Mode Selector
Press the mode selector to cycle through the four operating modes: CCT, RGB,Filter,and Special
Effects.
Brightness Dial
In all operation modes,the Brightness dial adjusts the brightness from 100% to 0% in 1% increments.
In all operation modes, press the Brightness dial to toggle between the set brightness and 0%.
Function Buttons
The function buttons implement the action or access the menu indicated on the LCD screen
next to the button.
In each mode, the Adjustment and Brightness dials can change settings.
Adjustment Dial
In all operation modes, the Adjustment dial changes the value of the highlighted function.
For example, in CCT mode, press the Adjustment dial to toggle between 3200 and 5600 K color
temperatures.
Voltage Display
Batteries with SMBUS data communication
The Taiko displays a battery indicator at the top of the screen.
Batteries without SMBUS data communication
The Taiko displays the actual voltage of the power source.This allows you to gauge the remaining
battery power.
9
CCT Mode
Corrolated color temperature (CCT) mode allows you to adjust the color temperature from 2800
to 10,000 K and set the green/magenta tint level.
CCT Screen
Use the Adjustment dial to adjust the color
temperature between 2800 and 10,000 K in
50 K increments.
Press the Adjustment dial to toggle between
3200 and 5600 K color temperatures.
Tint (+/− Green) Screen
The +/− Green function lets you match the
Taiko’s color to an existing light source by
adjusting the green/magenta saturation
level.This is a particularly useful feature when
shooting under uorescent lights.
Tap the Function button next to“+/− Green” to
access the Tint adjustment screen.
Use the Adjustment dial to set the green/
magenta color shift between +100% (full
plus green) to −100% (full minus green) in 1%
increments.
Press the CCT button to exit the +/− Green
submenu and return to CCT adjustment
screen.
32%
3900K
CCT
32% 14.4V 14.4V
+/- GREEN
0%
17%
CCT
+/- GREEN
3900K
32% 14.4V 14.4V
10
RGB Mode
RGB mode lets you dial in any color by scrolling through the entire color wheel.This mode controls
hue and saturation levels and has an adjustable base white point for complete control over
color selection.
Hue Adjustment
Use the Adjustment dial to set the hue from 0°
to 360° on the color wheel.The crosshair icon
moves horizontally to represent the location of
the hue on the color wheel.
The icon conveniently loops from 360° to 0°
when scrolling through the color wheel.
Saturation Adjustment
Tap the function button next to“SAT” to adjust
saturation levels.
Use the Adjustment dial to set the saturation
of the hue from 100% to 0% in 1% increments.
The crosshair icon moves vertically to represent
the level of saturation.
Press the Hue button to return to the hue
adjustment screen.
Note:The dimmer function remains active,and you can independently adjust the Taiko’s brightness
while in Saturation mode.
HUE
100
SAT
6000K
WHITE P.
169
32% 14.4V 14.4V
HUE
100
SAT
6000K
WHITE P.
169
32% 14.4V 14.4V
Table of contents
Other Luxli Lighting Equipment manuals
Luxli
Luxli CELLO 2 User manual
Luxli
Luxli Timpan-1x1 User manual
Luxli
Luxli ORC-CELLO-10-DK User manual
Luxli
Luxli VIOLA 2 User manual
Luxli
Luxli TIMPANI2 User manual
Luxli
Luxli ORC-CELLO-M2 User manual
Luxli
Luxli TIMPANI2 User manual
Luxli
Luxli ORCHESTRA Series User manual
Luxli
Luxli SFT-50R User manual
Luxli
Luxli ORC-TAIKO-2x1 User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
