LUX KONO User manual

Installaon Manual

Smart

THERMOSTAT

Thanks for inving KONOTM into your home. The setup process is easy.

All you need to do is follow these simple steps and you’ll be on your

way to saving energy and making your home even more comfortable.

LUX Products oers installaon and product videos

Please visit LuxProducts.com/videos or visit our YouTube channel

LUX Products Corporaon. To contact LUX Technical Support please call

856.234.8803.

Para ver estas instrucciones en español, por favor visite

LuxProducts.com/KONOmanualsSP

[Drill]

LuxProducts.com | 3

Tools Needed

Table of Contents

1. Start Here ......................................................................................2-6

2. Installing with a C-Wire................................................................7-10

3. Installing without a C-Wire ........................................................11-14

4. Connecng to the Network .......................................................15-19

5. Appendix....................................................................................20-23

KONO Smart

Drill Oponal: Wire Stripper SmartphonePhillips Screwdriver

1. START HERE

LUX Power BridgeTM

Wiring Labels

What’s in the box?

Screws Wall Anchors

Trim Plate

4 | 856.234.8803

Behind KONO’s Décor-snapTM cover you will see a small, removable

“quick guide” to installaon and an icon-key label. The icons represent

the display icons of your KONO Smart. You will also nd important

informaon for HomeKitTM and WiFi setup.

This manual is a comprehensive guide to installaon and wiring.

Press the knob when the thermostat is idle to

view the menu. Rotate the knob to select an

opon and press again to conrm.

System Mode Installaon

Sengs

Fan Mode Network

Connecon

Run Schedule System

Preparing

For more informaon about

installaon sengs, please visit

LuxProducts.com/KONOmanual

LuxProducts.com | 5

Step 1.1: Download the LUX Products App to your mobile device and

create an account.

Step 1.2: Now set your phone aside and turn o the power

at the circuit breaker to both your heang and cooling

systems before performing any wiring.

Step 1.3: Conrm that your heang and cooling system is powered

down by changing the temperature on your thermostat.

Hint: Your system should not make any noise and you should not feel

any air exing your vents.

Step 1.4: Remove the front of your old thermostat

from its base. If you see thick black wires, wire

nuts, or any labels that say 120-240VAC or High

Voltage, your system is not compable with KONO

Smart. Please call LUX Technical Support at

856.234.8803 before proceeding with your

installaon. If you do not see any high voltage labels

or wires, you can connue with your installaon.

1. START HERE

HIGH

VOLTAGE

6 | 856.234.8803

Step 1.5: Use the included wire labels to mark which wire is connected

to each terminal in your old thermostat. Take a picture of your current

wiring layout – it may be helpful to reference this picture later.

Step 1.6: Conrm if you have a C-Wire. If you do, please turn to the

next page. If you do not, please skip ahead to page 11.

LuxProducts.com | 7

INSTALLATION WITH

C-WIRE2.

Installing with a C-wire

Before starng

Turn o the power at the circuit breaker to

both your heang and cooling systems before

performing any wiring. You will not need the

included LUX Power Bridge.

STOP

8 | 856.234.8803

Installaon with C-wire

Step 2.1: Idenfy your system conguraon (see wiring diagrams in

appendix). Potenal conguraons include:

• Convenonal 1H/1C (Y, G, W, R, C)

• Convenonal 2H/1C (Y, G, W, W2, R, C)

• Heat Pump Single-Stage (Y, G, R, O/B, C)

• Heat Pump with auxiliary heat or dual fuel (Y, G, R, O/B, W, C)

If you have only one R wire, please use the RH terminal. If you have a

dierent conguraon other than what is listed above, please call LUX

Technical Support for help with your installaon.

Step 2.2: Remove each wire from its terminal – make sure that they

don’t fall down back into the wall.

Step 2.3: Remove the mounng screws from the base of the old

thermostat. Remove the base from the wall.

Step 2.4: If you would like to use the trim plate or wall anchors,

you can install them now.

Step 2.5: Separate KONO Smart from its

base. Pull the wires from your wall through

the center hole of the KONO Smart base.

Secure the base to the wall using the

included mounng hardware.

LuxProducts.com | 9

Opon 1 - Convenonal (furnace) Systems:

Step 2.6f: Following the terminal labels

marked “Convenonal” on the thermostat

base, press the lever and insert each

labeled wire into the top hole of the

corresponding terminal.

Step 2.7f: If you have both an RC and RH wire present, then remove the

red cap next to the reset buon. You can now skip ahead to step 2.8.

Opon 2 - Heat Pump Systems:

Step 2.6hp: Following the terminal labels

marked “Heat Pump” on the thermostat base

and referencing your wiring photo, press the

lever and insert each labeled wire into the top

hole of the corresponding terminal.

If your old thermostat did not have a W1 wire but did have a W2 wire,

please insert the W2 wire into the W1 terminal.

Step 2.7hp: If you have both an O wire and a B wire

(i.e. in a Trane system), please install the B wire to the “C” terminal.

For more detailed direcons, please see the wiring diagrams in the

appendix or call LUX Technical Support.

INSTALLATION WITH

C-WIRE2.

CONVENTIONAL C W1 W2

HEAT PUMP C W1 OB

POWER BRIDGE 1 4 2

CONVENTIONAL C W1 W2

HEAT PUMP C W1 OB

POWER BRIDGE 1 4 2

10 | 856.234.8803

Installaon with C-wire

Step 2.8:

Securely fasten KONO Smart onto its base. Once it has clicked

into place, return power to your heang and cooling system.

Step 2.9: Aer your thermostat powers up, you are ready to congure

KONO Smart for your heang and cooling system and connect to a

wireless network.

Please skip ahead to the “Connecng to the Network” secon of this

manual on page 15.

Table of contents

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide