Lumens PS400 User manual

English - 1

PS400

Digital Visualizer

Quick Start Guide

English - 2

1. Product Content

Main Unit Quick Start Guide User Manual

Download Card Power Cord USB Cable



C-Video Cable VGA Cable Remote

2. Product Overview

1. Camera Head

2. Camera arm

3. Lamp

4. Backlight

5. Remote controller slot

6. CF card slot

7. Lamp lock

8. Control Panel

9. Button Function Guide

10. IR sensor (for controller)

11. IO connector

English - 3

3. Installation Process

3.1 Input /Output Connection

3.1.1 Connecting VGA out to Monitor or Projector

3.1.2 Connecting DVI out to Monitor or Projector

3.1.3 Connecting S-Video/C-Video to TV

DIP switch setting

【Notice】1. The DIP setting will be taken effect after restarting the device.

2. No VGA output once S-Video/C-Video output is turn on.

3. NTSC：USA、Ta i w an 、Panama、Philippine、Canadian、Chile、Japan、

Korea、Mexico

4. PAL: Besides above NTSC listed countries.

Monitor

Pro

ector

Monitor

Projector

OFF

NTSC

OFF

PAL

English - 4

3.1.4 Connecting VGA in to Computer

3.1.5 Connecting USB to Computer

Connect to USB port then install the supplied queue program. Please refer to

queue installation Instruction for more information.

【Notice】Don’t connect the Digital Visualizer to PC Until USB Driver has been

installed properly.

3.1.6 RS232 to Computer

Connect to RS232 port then execute RS232 command.

3.1.7 Plug in the power outlet

PC Notebook

AC Outlet

English - 5

3.2 Initial Setup

3.2.1 Setup the Digital Visualizer

1. Pull up the arm and camera head then turning the camera head

toward the platform

2. Press and slide the latches (Lamp release) to release the lamp lock

then Pull up the lamp arms.

3. Rotate the folded lamp to face the platform as the arrow shows.

※Note：The angle of the camera head/lamp arm/lamp head is limited.

Do not turn it forcefully when it reaches the maximal angle

3.2.2 Power On

※Note：Before using the Digital Presenter, make sure that you have

connected it to the computer, video source or other output devices.

Please refer to the 3-1 section.

1. Press (the『POWER』button) for about 1 second to power on

the Digital Presenter. The red LED (flashing until the presenter is

started) turns to green.

2. Press the 『LAMP』button on the remote control to switch the side

lamp or backlight.

※Note: you may rotate the camera head appropriately for better lighting.







English - 6

4. Start to use

4.1 Select Input Source

The default input source is set as "Digital Visualizer", press 『Source』to

switch.

4.2 Zoom in/ out

Zoom in / out by pressing continuously

Remote

Monitor

Projector

PC Notebook

Keypad Remote

Keypad



English - 7

4.3 Auto Focus

Auto Focus by pressing once

4.4 Brightness Adjustment

4.5 A4/A5 Size

The default shooting area is A4 size, please『A5』to change.

Keypad

Remote

Keypad

English - 8

4.6 Capture & Play Image:

Capture Live Image『Capture』or Play the captured image『Play』

4.7 OSD Menu

* Please refer to the Button Function Guide pasted on the front panel for simple

operation.

* More detail functions of OSD menu, please read the user manual.

* The updated information will be regularly released on Lumens web site,

please visit our web site http://www.lumens.com.tw for the most updated.

Keypad Remote

Table of contents

Lumens PS400 User manual

Popular Document Camera manuals by other brands