Lumens CL510 Quick start guide
1
CL510 Firmware Upgrade Instruction
1. Before FW upgrade, please check the current FW version of CL510.
[Menu][Setting][Advanced][Firmware Version]
If PVL1xx, please download PVL1xx version.
If PVL2xx, please download PVL2xx version.
If PVL3xx, please download PVL3xx version.
*[Note] Different FW code can’t be upgraded.
2. Save the proper FW file in the USB Disk.
3. Connect CL510 with a Monitor/ Projector and power on the unit.
4. Insert the USB Disk into the USB port of CL510.
5. Call the Service Menu.
Press “[Freeze]> [Delete]> [Enter]” in sequence to show the Service Menu.
Service Menu：press “ Freeze Delete Enter ” in sequence
1
2
3
2
6. Go to [ISP] page, select [Firmware Upgrade], and press [Enter].
7. Check the FW version and press [Yes] to start upgrade.
Current version: current FW version of CL510
New version: the latest FW version in USB disk.
*[Note] if two more firmware files co-exist in the USB disk, the unit will always detect
the latest version automatically.
8. Restart the CL510 after upgrade
After upgrading, following prompt will pop-up and please restart the unit.
Other manuals for CL510
2
Table of contents
Other Lumens Document Camera manuals
Lumens
Lumens CL510 User manual
Lumens
Lumens DC-W80 User manual
Lumens
Lumens DC120 User manual
Lumens
Lumens DC136 User manual
Lumens
Lumens PS660 User manual
Lumens
Lumens DC120 User manual
Lumens
Lumens DC-A11 User manual
Lumens
Lumens DC235 User manual
Lumens
Lumens DC155 User manual
Lumens
Lumens PS750 User manual
Lumens
Lumens DC200 User manual
Lumens
Lumens PC120 User manual
Lumens
Lumens PS760 User manual
Lumens
Lumens PS400 User manual
Lumens
Lumens DC136 User manual
Lumens
Lumens PC193 User manual
Lumens
Lumens DC260 User manual
Lumens
Lumens DC260 User manual
Lumens
Lumens DC-F20 User manual
Lumens
Lumens DC265 User manual
