LUCCI Air UNO 209055 Installation guide

V1.0 (2020/05)

LUCCI AIR

UNO EXHAUST FAN

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Mett Exhaust Fan Installation Instructions

2 | P a g e

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and

follow all instructions carefully before assembly, installation and use of this exhaust fan. Please keep

instructions for future reference.

WARRANTY

•This exhaust fan is covered by a 2-year warranty. The warranty is from date of purchase, not the date

of installation.

•Please retain the proof of purchase for any warranty enquires.

•Warranty will be void if there is any damage due to improper usage or modification to the exhaust fan.

•

Failure to comply with the instructions in this manual may increase the risk of damage or injury and will

void the warranty.

SAFETY PRECAUTIONS

•Always ensure the power is OFF and the exhaust fan has cooled down before performing installation, any

maintenance, cleaning or making any adjustment to the exhaust fan.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge unless they have been given supervision or

instruction concerning the use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the appliance.

•WARNING: If unusual oscillating movement is observed, immediately stop using the product and contact

the manufacturer, its service agent or suitably qualified persons.

•Do not allow any foreign object to enter the grille opening as which may damage the product.

Mett Exhaust Fan Installation Instructions

3 | P a g e

INSTALLATION REQUIREMENT

•The appliance MUST BE installed by a licensed electrician.

•All wiring and installation of the exhaust fan must adhere to the local council regulation and latest local

and national wiring rules, eg. AS/NZS 3000 electrical installations. If unsure, contact a licensed electrician.

•Means of all-pole disconnection must be incorporated in the fixed wiring.

•This is a Class I product and must be earthed.

•This product is suitable for indoor use only.

•This product must be installed at least 2.1 m above the floor level.

•Before cutting a hole in the ceiling, check that there are no ceiling joists, etc. or electrical wiring above the

desired mounting location.

•The mounting point must be able to support at least 2 times the weight of the exhaust fan.

•Ensure all the clearance values to the structural building element are maintained according to the

clearance diagram in Figure 2.

•Do not install the exhaust fan in canopies over stoves, etc., as excessive heat will damage the product.

•This product is designed for installation in the flat ceiling only. Do not mount it on a sloping ceiling or a

vertical wall.

•Any duct (not included) attached to the product must be installed horizontally in the ceiling and with the

same height or lower than the exhaust fan.

•Ensure the duct (not included) is not bent; otherwise, the performance will be reduced.

•Where applicable, precautions must be taken to avoid the back-flow of gases into the room from the open

flue of gas or other fuel-burning appliances.

•Do not allow any thermal insulation to cover any part of the rear of the appliance.

•Ensure the thermal insulation does not obstruct the airflow.

•There must be an adequate source of external air to ensure the rated performance.

•For exhaust fan optimum performance, the volume of air being extracted should be equal to the amount

of air entering the room. Air is drawn mostly from under a door, or an open window. If the bathroom or

room is airtight (door and windows shut), the exhaust will not perform well.

Mett Exhaust Fan Installation Instructions

4 | P a g e

PARTS LIST

•Unpack your fan carefully. Remove all parts and hardware.

•Lay out all the components on a smooth surface and make sure no components are missing before

assembling. If parts are missing, return the complete product to the place of purchase for inspection or

replacement.

•Check whether the exhaust fan has been damaged during transport. Do not operate/install any product

which appears damaged in any way. Return the complete product to the place of purchase for inspection,

repair or replacement.

•Examine all parts, which should include the following:

1 Light kit x 1

2 Fan motor assembly x 1

3 Outlet nozzle x 1

CLEARANCE REQUIREMENT

Before installation, please plan and check the ceiling space to make sure that there are no obstructions such

as ceiling joists and there is sufficient height clearance for the motor housing. Refer to figure 2 for the

clearance requirement.

Fig. 1

Fig. 2

DO NOT COVER WITH THERMAL INSULATION!

Mett Exhaust Fan Installation Instructions

5 | P a g e

INSTALLATION DIRECTION

NOTE: Switch off the main power before commencing the below installation. Please check if the

installation location has access to the wall switches. Refer to the circuit diagram (Fig.4) for more

details for connection of the wirings.

1. Cut an installation hole into the ceiling according to cut-out size specified in the specification section.

(Fig.3.1)

2. Open the cover of the terminals compartment by removing the four screws. (Fig.3.2)

3. Slide and push the outlet nozzle in position. (Fig.3.3)

NOTE: Check and ensure the nozzle is secured and clicked on the fixing point. (Fig.3.3A)

4. Connect the wiring onto the terminals according to the wiring diagram (Fig.3.4 & Fig.4)

NOTE: Ensure the supply cable is placed in the provided cord anchorage and secured by tightening

the screws on the cord anchorage. (Fig.3.4A)

5. Attach the outlet duct (not included) to the outlet and install the exhaust fan into the cut-out hole.

(Fig.3.5)

6. Push the three mounting clips outwards then tighten the screws until the mounting clips are clamped to

the ceiling tightly. (Fig.3.6)

7. Connect the male quick-connector of the light kit onto the female quick-connector of the exhaust fan

body. (Fig.3.7)

8. Install the light kit onto the exhaust fan body. (Fig.3.8)

9. Install the GX53 lamp (Not included) onto the lamp holder. (Fig.3.9)

NOTE: Do NOT install the lamp exceeding the allowed maximum power.

NOTE: The lamp MUST BE installed before turning on the exhaust fan.

NOTE: It is recommended to install the Lucci GX53 lamp (Lucci sku# 121357, 121358 sold separately)

to the light kit to achieve the best appearance and performance.

10. Switch on the power to test the exhaust fan & its light kit. (Fig.3.10)

Mett Exhaust Fan Installation Instructions

6 | P a g e

Fig. 3

Mett Exhaust Fan Installation Instructions

7 | P a g e

CIRCUIT DIAGRAM

NOTE: THE APPLICANCE & THE WALL SWITCHES MUST BE INSTALLED BY A LICENSED

ELECTRICIAN.

CARE & CLEANING

NOTE: Always turn OFF the power at the mains switch before performing any maintenance or

attempting to clean your fan

•Clean the fascia and blades regularly. To clean, wipe with a damp clean cloth with NO organic solvents

or cleaners.

•Do not soak or immerse your fan in the water or other liquids. It could damage the product and create the

possibility of an electrical shock.

Specifications

SKU # 209055 209056

Colour Black White

Insulation class Class I

IP rating IP20

Rated voltage 220-240V~, 50Hz

Rated wattage Max.63W (45W Motor + Max.18W Light)

Compatible Lamp GX53 lamp, Max.23W

Max. Airflow 250 M

Overall dimensions H: 175mm W: 275mm L: 195mm Fascia:

275mm

Cut-out size

240mm

Exhaust outlet

125mm

Weight 1.88kg

Fig. 4

Mett Exhaust Fan Installation Instructions

8 | P a g e

LUCCI FAN WARRANTY DETAIL

LUCCI WARRANTY HOTLINE- 1800 602 243

THIS WARRANTY IS VALID IN AUSTRALIA ONLY

In the event of service being required, please call the Lucci Fan Warranty Hotline on 1800 602 243 between 9am & 5pm

(EST) Monday to Friday. Please make sure you have all the fan details filled out at the end of the manual before making

the call.

Every Lucci fan is thoroughly inspected and tested before being released for sale. In addition to any warranty rights or

conditions under statutory regulations, Lucci warrants all of its fans against defective workmanship and faulty materials

for twenty four (24) months from the date of purchase. Lucci undertakes, at its option, to repair or replace, free of charge,

each product or part thereof on condition that;

1. The fan or relevant part has not been subjected to misuse, neglect, or been involved in an accident.

2. The repairs are not required as a result of normal wear and tear.

3. The product was installed by a licensed electrical contractor.

4. A copy of the original receipt of purchase is presented.

5. 12 month warranty applies when used in any non-domestic applications.

6. This warranty does not cover stains, scratch and scuff marks, or dents if the product is purchased through a

factory outlet or to refurbished items.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You

are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does

not amount to a major failure.

Lucci Design cannot be held responsible for any repair other than those carried out by it or one of its Authorised

Service Agents. Please keep this warranty information in a safe place. This information must be produced in the

event of service being required.

Distributed by:

Beacon Lighting

140 Fulton Drive

Derrimut, Victoria, 3026

Australia

Ph +613 9368 1000

Fax +613 9360 9332

Email: warranty@beaconlighting.com.au

Mett Exhaust Fan Installation Instructions

9 | P a g e

LUCCI FAN WARRANTY INFORMATION

LUCCI WARRANTY HOTLINE- 1800 602 243

Complete and retain this form for your personal records and warranty purposes.

NAME…………………………………………………………………………………

ADDRESS……………………………………………………………………………

……………………………………………………POSTCODE……………………

MODEL NUMBER……………………………………………………………………

(PO# + DATECODE Sticker here)

PO NUMBER or DATECODE ………………………………………………………

DATE OF PURCHASE………………………………………………………………

INSTALLING LICENSED ELECTRICIAN……………………………………………

…………………………………………………………………………………………

LICENCE No…………………………………………………………………………

ATTACH PROOF OF PURCHASE HERE

THIS COMPLETED DETAIL PAGE SHOULD BE PRODUCED AND FAXED TO THE

WHOLESALER OR THEIR AUTHORISED AGENTS BEFORE OBTAINING

WARRANTY SERVICE

This manual suits for next models

Table of contents

Other LUCCI Air Fan manuals

LUCCI Air

LUCCI Air AIRFUSION MOTO LD-MOTO-52 Installation guide

LUCCI Air

LUCCI Air AIRFUSION AIRLIE II ECO Series User manual

LUCCI Air

LUCCI Air OSPREY 216170 Owner's manual

LUCCI Air

LUCCI Air AIRFUSION QUEST II User manual

LUCCI Air

LUCCI Air POLIS 216162 Owner's manual

LUCCI Air

LUCCI Air AIRFUSION CLIMATE III Installation guide

LUCCI Air

LUCCI Air REEF User manual

LUCCI Air

LUCCI Air AIRFUSION FRASER Series User manual

LUCCI Air

LUCCI Air AIRFUSION PEREGRINE Installation guide

LUCCI Air

LUCCI Air 209036 User manual

LUCCI Air

LUCCI Air GRENADA Series User manual

LUCCI Air

LUCCI Air AIRFUSION A Installation guide

LUCCI Air

LUCCI Air AIRFUSION ZOOM Installation guide

LUCCI Air

LUCCI Air ABYSS IP66 User manual

LUCCI Air

LUCCI Air AIRFUSION BREEZE TRIPOD FAN User manual

LUCCI Air

LUCCI Air AIRFUSION CAROLINA Installation guide

LUCCI Air

LUCCI Air NEWHAVEN 216150 Owner's manual

LUCCI Air

LUCCI Air AIRFUSION GIRONA User manual

LUCCI Air

LUCCI Air AIRFUSION AIRLIE II ECO Series Installation guide

LUCCI Air

LUCCI Air FUTURA GX53 LED Installation guide

LUCCI Air

LUCCI Air AIRFUSION AIRMOVER Installation guide

LUCCI Air

LUCCI Air ATLANTA User manual

LUCCI Air

LUCCI Air Airfusion Radar User manual

LUCCI Air

LUCCI Air AIRFUSION CAROLINA Installation guide

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual