LUCCI Air AIRFUSION CAROLINA Installation guide

V1.0 – EN-WS (09/2019)

LUCCI

AIRFUSION CAROLINA

70 INCH CEILING FAN

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Airfusion Carolina Installation Instructions

2 | P a g e

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and

follow all instructions carefully before assembly, installation and use of this ceiling fan. Please keep

instructions for future reference.

SAFETY PRECAUTIONS

1. In Europe: This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning the use of the appliance in a safe way and understand the hazards

involved. Cleaning and maintenance shall not be undertaken by children without supervision.

2. In Australia: The appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning the use of the appliance by a person responsible for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local wiring

rules.

IN AUSTRALIA

WARNING:

FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION

MUST BE INCORPORATED INTO THE FIXED WIRING IN

ACCORDANCE WITH THE WIRING RULES.

As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the

minimum electrical safety of this standard.

Please note warranty will be void if installation is without a means for

an all-pole disconnection incorporated in the fixed wiring in accordance

with the wiring rules.

Airfusion Carolina Installation Instructions

3 | P a g e

Example: If a fan is connected to a circuit that can be isolated via an

all-pole safety switch at the switchboard, then this is considered to be

an all-pole disconnection to the ceiling fan electrical circuit, meeting the

requirements of clause 7.12.2 of AS/NZS 60335.1.

A single-pole switch on the active of the receiver input of remote

control must also be included in the wiring, and located the same

room as the ceiling fan.

5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

Contact your local government for information regarding the collection systems available.

6. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the

ground water and get into the food chain, damaging your health and well-being.

7. The structure to which the fan is to be mounted must be capable of supporting a weight of 32kg.

8. The fan should be mounted so that the blades are at least 2.3 m above the floor in Europe or 2.1 m above

the floor in Australia.

9. This fan is suitable for indoor and alfresco areas where the fan is fully undercover with a minimum of 2

walls. This fan is not waterproof. When installed in an alfresco area, the ceiling fan must be positioned in

a location protected from water, wind, dust and salt. Exposure to these elements will void the warranty.

Mounting the fan in a situation where it is subject to water or moisture is dangerous and may increase the

risk of damage, injury or electrical shock and will void the warranty.

10. Must be assembled and installed by a licensed electrician.

11. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the ceiling

fan and contact the manufacturer, its service agent or suitably qualified persons.

12. The replacement of parts of the safety suspension system device shall be performed by the manufacturer,

its service agent or suitably qualified persons.

13. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a

sufficient strength to withstand 4 times the weight of the ceiling fan; that the mounting of the suspension

system shall be performed by the manufacturer, its service agent or suitably qualified persons.

Airfusion Carolina Installation Instructions

4 | P a g e

PARTS LIST

•Unpack your ceiling fan carefully. Remove all parts and hardware.

•Lay out all the components on a smooth surface and make sure there are no components missing before

assembling. If parts are missing, return the complete product to the place of purchase for inspection or

replacement.

•Check whether the ceiling fan has been damaged during transport. Do not operate/install any product

which appears damaged in any way. Return the complete product to the place of purchase for inspection,

repair or replacement.

•Examine all parts, you should have the following:

1 Canopy x 1

2 Down rod x 1

3 Coupling cover x 1

4 Motor assembly x 1

5 Blade assembly x 3

6 Blade screw x 9 (and 1 spare)

7 Screw for mounting bracket x 2

8 Balance kit x 1 set

9 Wall switch x 1 set

Fig. 1

Airfusion Carolina Installation Instructions

5 | P a g e

INSTALLING THE MOUNTING BRACKET

•The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from the

tip of the blade to the nearest objects or walls.

•Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 32kg,

with the two long screws provided. Ensure at least 30mm of the screw is threaded into the support. (Fig. 2)

NOTE: The bracket screws provided are for use with wooden structures only. For structures other

than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for the

mounting surface and the surrounding environment.

ANGLED CEILING INSTALLATION

This fan hanging system supports a maximum

9 degree angled ceiling installation.

Fig. 3

Fig. 2

32 KG

Airfusion Carolina Installation Instructions

6 | P a g e

BLADE INSTALLATION

•Align the 3 mounting holes on the blade assembly (3) to the 3 mounting holes on the rotating member of

fan motor assembly (1) and using the 3 blade screws with washers (2) to secure the blade assembly (3)

to the fan motor assembly,

•Ensure the screws are tightened equally and evenly to reduce the chance of warping or unbalancing.

Take care not to over tighten the screws as this can damage the blades.

•Once completed, repeat the process on the remaining blades.

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on

the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.5)

Fig. 5

Fig. 4

Airfusion Carolina Installation Instructions

7 | P a g e

ELECTRICAL WIRING DIAGRAM

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A

LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED

WIRING.

NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is omitted

when no light kit is used with the ceiling fan.

USE WITH WALL SWITCH WIRING DIAGRAM:

Ensure the motor earth wire is connected to the single earthing terminal block “2” in the diagram below. (Fig.

Fig. 6

Airfusion Carolina Installation Instructions

8 | P a g e

USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold separately)

Ensure the motor earth wire is connected to the single earthing terminal block “2” in the diagram (Fig. 6), for

(Fig.7 and Fig.8)

1/ Remote without quick connectors (manual wiring)

2/ Remote with quick connectors (using quick connectors)

Fig. 7

Fig. 8

Airfusion Carolina Installation Instructions

9 | P a g e

FINISHING THE INSTALLATION

•After completing the electrical connection at the mounting bracket terminal block, connect the ceiling fan

wiring via the quick connector plug.

•Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan’s

accessible metal body back to the earth terminal at the terminal block on the mounting bracket.

•Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and

that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws

provided. (Fig. 9)

•Switch ON mains power supply to the fan. Test the fan operations or enjoy using the fan following

instructions the under “USING YOUR CEILING FAN” section of this instruction manual.

USING YOUR CEILING FAN

FAN WALL CONTROL

Turn on the power and check the operation of the fan.

• OFF Position – Fan off

• 3rd Position – Low fan speed

• 2nd Position – Medium fan speed

• 1st Position – High fan speed

LIGHT CONTROL

• Toggle Switch – On/off

Fig. 10

Fig. 9

Airfusion Carolina Installation Instructions

10 | P a g e

REVERSE FUNCTION

Your ceiling fan can operate in either summer or winter mode.

The reverse switch is located at the top of the motor housing.

NOTE: You need a small tool to adjust the reverse switch in the top housing.

SUMMER Mode: The reverse switch should be in the SUMMER position to rotate the fan in an anticlockwise

direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch should be in the WINTER position to rotate the fan in a clockwise direction.

The airflow will be directed upwards assisting in the circulation of warm air, for energy conservation in winter.

AFTER INSTALLATION

WOBBLE:

NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber

grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few

centimetres is quite acceptable and DOES NOT suggest any problem.

TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down

rod are secure.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please refer to

the instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing should

the ceiling fan become un-balanced again. Store your balancing kit away after installation for future use if

required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and

frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in fan

motor noise. This is normal. Please allow a 24-hour “settling-in” period, most noises associated with a new

fan disappear during this time.

The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as

hearing the motor run – All electric motors are audible to some extent.

Fig. 11

Other manuals for AIRFUSION CAROLINA

Table of contents

Other LUCCI Air Fan manuals

LUCCI Air

LUCCI Air AIRFUSION CAROLINA Installation guide

LUCCI Air

LUCCI Air 209047 User manual

LUCCI Air

LUCCI Air ARIA GX53 CTC DC Installation guide

LUCCI Air

LUCCI Air CLIMATE III User manual

LUCCI Air

LUCCI Air AIRFUSION BREEZE Installation guide

LUCCI Air

LUCCI Air AIRFUSION MOTO LD-MOTO-52 Installation guide

LUCCI Air

LUCCI Air FIJIAN II Series User manual

LUCCI Air

LUCCI Air AIRFUSION BREEZE 213120EU Installation guide

LUCCI Air

LUCCI Air MONZA User manual

LUCCI Air

LUCCI Air MOONAH GX53 Series User manual

LUCCI Air

LUCCI Air AIRFUSION ZOOM Installation guide

LUCCI Air

LUCCI Air AIRFUSION HAVANA User manual

LUCCI Air

LUCCI Air GRENADA Series User manual

LUCCI Air

LUCCI Air AIRFUSION CAROLINA Owner's manual

LUCCI Air

LUCCI Air AIRFUSION MOONAH Installation guide

LUCCI Air

LUCCI Air FUTURA Series Installation guide

LUCCI Air

LUCCI Air AIRFUSION FLUSSO User manual

LUCCI Air

LUCCI Air AIRFUSION CLIMATE II User manual

LUCCI Air

LUCCI Air AIRFUSION MARINER User manual

LUCCI Air

LUCCI Air FUTURA GX53 LED Installation guide

LUCCI Air

LUCCI Air ATLANTA User manual

LUCCI Air

LUCCI Air Airfusion Louisville User manual

LUCCI Air

LUCCI Air Airfusion Atlanta User manual

LUCCI Air

LUCCI Air Nordic User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual