LUCCI Air Aria-WS-WH User manual

V1.1 WS-

AU (03/ 2022)

LUCCI

AIRFUSION ARIA

CEILING FAN

⚫INSTALLATION

⚫OPERATION

⚫MAINTENANCE

⚫WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Aria Installation Instructions

1 | P a g e

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read

and save all instructions before using the product.

SAFETY PRECAUTIONS

1. The appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning the use of the appliance by a person responsible for their

safety.

2. Children should be supervised to ensure that they do not play with the appliance.

3. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local

wiring rules.

IN AUSTRALIA

WARNING:

FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION

MUST BE INCORPORATED INTO THE FIXED WIRING IN

ACCORDANCE WITH THE WIRING RULES.

As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the

minimum electrical safety of this standard.

Please note warranty will be void if installation is without a means for

an all-pole disconnection incorporated in the fixed wiring in

accordance with the wiring rules.

Example: If a fan is connected to a circuit that can be isolated via an

all-pole safety switch at the switchboard, then this is considered to be

an all-pole disconnection to the ceiling fan electrical circuit, meeting

the requirements of clause 7.12.2 of AS/NZS 60335.1.

A single-pole switch on the active of the receiver input of remote

Aria Installation Instructions

2 | P a g e

control must also be included in the wiring, and located the same

room as the ceiling fan.

4. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems available. If

electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the

ground water and get into the food chain, damaging your health and well-being.

5. The structure to which the fan is to be mounted must be capable of supporting a weight of 20kg.

6. The fan should be mounted so that the blades are at least 2.1 m above the floor.

7. This fan is suitable for indoor, alfresco and coastal areas where the fan is fully undercover with a

minimum of 1 wall. This fan is not waterproof. When installed in an alfresco or coastal area, the

ceiling fan must be positioned in a location protected from water, wind and dust. Exposure to these

elements will void the warranty. Mounting the fan in a situation where it is subject to water or

moisture is dangerous and may increase the risk of damage, injury or electrical shock and will void

the warranty.

8. Must be assembled and installed by a licensed electrician.

9. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the

ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.

10. The replacement of parts of the safety suspension system device shall be performed by the

manufacturer, its service agent or suitably qualified persons.

11. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a

sufficient strength to withstand 4 times the weight of the ceiling fan; that the mounting of the

suspension system shall be performed by the manufacturer, its service agent or suitably qualified

persons

Aria Installation Instructions

3 | P a g e

BEFORE INSTALLATION

•Unpack your ceiling fan carefully. Remove all parts and hardware.

•Lay out all the components on a smooth surface and make sure there are no components missing

before assembling. If parts are missing, return the complete product to the place of purchase for

inspection or replacement.

•Check whether the ceiling fan has been damaged during transport. Do not operate/install any

product which appears damaged in any way. Return the complete product to the place of purchase

for inspection, repair or replacement.

•Examine all parts, you should have the following:

Mounting bracket x 1

Mounting screws x 2

Fan assembly x 1

Spare Motor screw for blade x 1

Blades x 4

Spare Flat washer for blades x 1

Bottom cover x 1

Balancing kit x 1

Wall controller x 1 (included 2 pcs wall switch screws)

Fig. 1

Aria Installation Instructions

4 | P a g e

INSTALLING THE FAN

TOOLS REQUIRED:

- Phillips / flat head screwdriver

- Pair of pliers

- Adjustable spanner

- Step ladder

- Wire cutter

- Wiring, supply cable as required by local provincial and national wiring codes and regulations

INSTALLING THE MOUNTING BRACKET

•The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the blade to

the nearest objects or walls.

•Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 20kg,

with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures other

than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for

the mounting surface and the surrounding environment.

ANGLED CEILING INSTALLATION

This fan hanging system supports a maximum 15 degree angled

ceiling installation.

Fig. 3

20 KG

Fig. 2

Aria Installation Instructions

5 | P a g e

INSTALLATION OF BLADE (Fig. 4)

1. Before Installing the blades, remove the motor blade screws and flat washers from the bottom of the

fan motor assembly.

2. Align the 2 holes on the blade with the 2 holes on the rotating member of the fan motor assembly.

3. Use the 2 blade screws from step 1, to secure the blade onto the fan motor assembly.

Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care

not to over tighten the screws, as this can damage the blades.

4. Repeat the same process for the other blades.

INSTALLATION OF BOTTOM COVER (Fig. 5)

•Install the bottom cover to the fan assembly then secure it by turning clockwise.

Fig. 4

Fig. 5

Aria Installation Instructions

6 | P a g e

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is

positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in

operation. (Fig.6)

ELECTRICAL WIRING DIAGRAM

PREPARE AND COMPLETE THE ELECTRICAL WIRING --- WIRING DIAGRAM (FIG.7)

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A

LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED

WIRING.

Ensure the motor earth wire is connected to the single earthing terminal block “1” in the diagram below.

(Fig. 7)

NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is

omitted when no light kit is used with the ceiling fan.

USE WITH WALL SWITCH WIRING DIAGRAM:

Fig. 7a

Fig. 6

Aria Installation Instructions

7 | P a g e

USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold separately)

1/ Remote without plugs

2/ Remote with plugs

Fig. 7b

Fig. 7c

Aria Installation Instructions

8 | P a g e

FINISHING THE INSTALLATION

•After completing the electrical connection at the mounting bracket terminal block, connect the ceiling

fan wiring via the quick connector plug.

•Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy

and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using

the screws provided.

USING YOUR CEILING FAN

FAN WALL CONTROL

Turn on the power and check the operation of the fan.

• OFF Position – Fan off

• 3rd Position – Low fan speed

• 2nd Position – Medium fan speed

• 1st Position –High fan speed

Light Control

• Toggle Switch – On/off (the fan is without light )

REVERSING SWITCH

Your ceiling fan can operate in either summer or winter mode.

SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate in an

anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a clockwise

direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy conservation in

winter.

Fig. 10

Fig. 9

Fig. 8

Aria Installation Instructions

9 | P a g e

AFTER INSTALLATION

WOBBLE:

NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the

fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimetres is quite

acceptable and DOES NOT suggest any problem.

TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down rod are

secure.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please refer to the

instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing should the ceiling

fan become un-balanced again. Store your balancing kit away after installation for future use if required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency

signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise. This

is normal. Please allow a 24-hour “settling-in” period, most noises associated with a new fan disappear during this

time.

The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the

motor run –All electric motors are audible to some extent.

CARE & CLEANING

NOTE: Always turn OFF the power at the mains switch before performing any maintenance or

attempting to clean your fan.

•Every 6 months periodic cleaning of your ceiling fan is the only maintenance required. Use a soft

brush or lint free cloth to avoid scratching the paint finish. Please turn off electricity power when you

do so.

•Do not soak or immerse your ceiling fan in the water or other liquids. It could damage the motor or

the blades and create the possibility of an electrical shock.

•Ensure that the fan does not come in contact with any organic solvents or cleaners.

•To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.

•The motor has a permanently lubricated ball bearing so there is no need to oil.

TECHNICAL INFORMATION

Fan

36’’ ARIA fan only

Fan Models

ARIA 36”-WS-WH; ARIA 36”-WS-BK / SKU# 213003; 213004

Rated Voltage

220-240V~ 50Hz

Rated Wattage (Motor)

45W

Rated wattage (Lamp)

N/A

Battery for remote

N/A

Weight

4.6kg

Canopy Dimensions

H:50mm Dia:136mm

This manual suits for next models

Table of contents

Other LUCCI Air Fan manuals

LUCCI Air

LUCCI Air MONZA User manual

LUCCI Air

LUCCI Air CONDOR Owner's manual

LUCCI Air

LUCCI Air AIRFUSION SLIPSTREAM User manual

LUCCI Air

LUCCI Air Airfusion Radar User manual

LUCCI Air

LUCCI Air BREEZE 8 Installation guide

LUCCI Air

LUCCI Air Airfusion Newport Owner's manual

LUCCI Air

LUCCI Air AIRFUSION BALI LD-BALI-52 User manual

LUCCI Air

LUCCI Air GRENADA Series User manual

LUCCI Air

LUCCI Air AIRFUSION FLUSSO User manual

LUCCI Air

LUCCI Air AIRFUSION MOONAH Installation guide

LUCCI Air

LUCCI Air NORDIC Series User manual

LUCCI Air

LUCCI Air AIRFUSION CLIMATE III Installation guide

LUCCI Air

LUCCI Air AIRFUSION BREEZE 213120EU Installation guide

LUCCI Air

LUCCI Air Nordic User manual

LUCCI Air

LUCCI Air Airfusion Akmani Series Guide

LUCCI Air

LUCCI Air AIRFUSION UNIONE-56 ORB User manual

LUCCI Air

LUCCI Air AIRFUSION CAROLINA Installation guide

LUCCI Air

LUCCI Air AIRFUSION AIRLIE II ECO Series Installation guide

LUCCI Air

LUCCI Air Altitude Eco Led Service manual

LUCCI Air

LUCCI Air FIJIAN II Series User manual

LUCCI Air

LUCCI Air SUMMIT Series User manual

LUCCI Air

LUCCI Air MOONAH GX53 Series User manual

LUCCI Air

LUCCI Air Airfusion Radar User manual

LUCCI Air

LUCCI Air AIRFUSION SHOALHAVEN Installation guide

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual