Ltech LT-924-OLED User manual
CHANNELS
1
www.ltech-led.com
Dimming Curve: 0.1~9.9
Protection: OTP/OCP/SCP
OLED display
8 bit / 16 bit
4 kinds of DMX interfaces
LT-924-OLED
www.ltech-led.com
Product introduction
6. With firmware upgrade function.
8. With power-on state management and fast self-testing function.
5. With the operations can be completed via the
RDM master console, such as parameters browsing & setting, DMX address setting,
equipment recognition, etc.
RDM remote management protocol,
4. 3-pin XLR, 5-pin XLR, RJ45 and green terminal DMX interface with photoelectric
isolation, improve signal transmission efficiency and anti-interference ability, the
green terminal also has signal amplifier function.
2. Easy operation with OLED screen and touch buttons.
1. Designed for Hi-power multiple channels application, 24 channels output, and Max. 3A
current per channel, up to 1728W output power.
3. 3 kinds of mode optional: single color, color temperature and RGB.
7.
when fault.
With short circuit, over current and over temp. protection, as well as warning function
10. Optional for standard, linear, LOG or custom 0.1-9.9 dimming curve.
9. 16bit (65536 levels) / 8bit (256 levels) grey level optional.
Gamma Value
DMX Value
Output
Brightness
0
100%
2.5 3.5
6.5
1.0
0.8
0.9
<1
>1
1.5
255
Photoelectric
isolation
Short circuit
protection
5-pin XLR
3-pin XLR RJ45 RDM Over current
protection
Display
Over temp.
protection
Photoelectric
isolation
E5 00 58 5
2 3
138
300
138
39
122
110
www.ltech-led.com www.ltech-led.com
Technical specs
LT-924-OLED
DMX512/RDM
12~24Vdc
3A × 24CH Max 72A
(0~36W...72W) × 24CH Max. 1728W
3-pin XLR, 5-pin XLR, RJ45, Green terminal
Dimming/CT/RGB
0.1~9.9, standard, linear, LOG
8bit (256 levels) / 16bit (65536 levels)
Yes
Short circuit / Over current / Over temperature
-30°C~65°C
L300×W122×H39mm
L313×W127×H41mm
1180g
Model :
Input signal :
Input voltage :
Current load :
Output power :
DMX interface :
Control mode :
Dimming curve :
Grey level :
Photoelectric isolation :
Protection:
Working temperature :
Dimensions :
Package size :
Weight (G.W.) :
Product size
Unit: mm
Main component description
Powered by DC1
Max. 18A
Powered by DC2
Max. 18A
Powered by DC3
Max. 18A
Powered by DC4
Max. 18A
DC2DC1 DC3 DC4
OLED screen
Power
indicator
Signal
indicator
3-pin XLR RJ455-pin XLR 12-24V dc
Input voltage
Green terminals
(with signal amplifier function)
DMX/RDM input & output
Green terminals
LED lamps connection
warranty
5 years
E5 0 0 5 85
4 5
DMX: Hz: High
Mode: RGB 8bit
Curve: Standard
Dim: Smo TOOL&v
001
DMX: 001 Hz:
Mode: RGB 8bit
Curve: Standard
Dim: Smo TOOL&v
High
DMX: 001 Hz: High
Mode: 8bit
Curve: Standard
Dim: Smo TOOL&v
RGB
DMX: 001 Hz: High
Mode: RGB
Curve: Standard
Dim: Smo TOOL&v
8bit
DMX: 001 Hz: High
Mode: RGB 8bit
Curve:
Dim: Smo TOOL&v
Standard
DMX: 001 Hz: High
Mode: RGB 8bit
Curve: Standard
TOOL&v Dim: Smo
M
<
<
Screen: ON+Addr
Contrast: 40%
Beep: ON
EXIT&v
TEST&v
001
DMX: 001 Hz: High
Mode: RGB 8bit
Curve: Standard
Dim: Smo TOOL&v
DMX: 001 Hz: High
Mode: RGB 8bit
Curve: Standard
Dim: Smo TOOL&v
[∧&V]
EXIT &V
ALL: 255
CH01: 255
CH02: 255
CH03: 255 [∧&V]
EXIT &V
www.ltech-led.com www.ltech-led.com
OLED screen interface
Press "M" key, switch entries.
Long press “M” key, back to main page.
Press "∧" or “∨" key, parameter adjustment.
Exit: back to previous page.
1. DMX address setting Press “∧" or “∨" key to set DMX address.
Range: 001~512
Main page
2. PWM frequency
Press “∧" or “∨" key to choose.
Optional : Dim
CT
RGB
3. Mode
No flicker in
video camera.
Press “∧" or “∨" key to choose.
Std (standard)
High
Mid (middle)
Low
Optional :
It is recommended to
use standard.
4. Grey scale
5. Dimming
curve
Press “∧" or “∨" key to choose.
Optional : 8bit
16bit (choose it if the master
controller support this function)
Press “∧" or “∨" key to choose.
Optional :
Linear
LOG
0.1~9.9
Standard
It is recommended to use standard,
0.1-9.9 is for special requirements.
Press “∧" or “∨" key to choose.
Optional :
Smo (smooth)
Std (standard)
Smo: This option with smooth processing, realize
the dimming flicker-free and dynamic effects
more downy.
It is recommended to use standard.
6. Enhance
dimming
7. Tool
* Fast self-testing function: press “ or " keys
simultaneously for 2-3 seconds under any page,
decoder will enter self-testing function.
∧"∨"
Press “∧" or “∨"
key to enter submenu.
Press “∧" or “∨"
key to enter
submenu of test.
Change all value
simultaneously.
(on the last page)
Screensaver open and
black if undo for 2 minutes.
Screen: ON+black
Screensaver not enable.
Screen: OFF
Screensaver open and display
address if undo for 2 minutes.
Screen: ON+Addr
Brightness setting
(range: 0~255)
Press”∧" or "∨"
to next page.
Press"∨" to exit.
Smooth and exquisite,
human eye is comfortable.
LT-9 24-OLE D LT-924-OLED LT-9 24-OLE D
6 7
1
3
2
PUSH
1
3
2
PUSH
www.ltech-led.comwww.ltech-led.com
Wiring diagram
Dimming mode Color temperature mode
RGB mode
RGB LEDs
Color temperature LEDs
Single color LEDs
2. DMX console onnectionc :
If the recoil effect occurs because of longer signal line or bad line quality, please try
to connect 0.25W 90-120Ω terminal resistor at the end of each line.
*
DMX console
DMX signal
LT-924-OLED is equipped with 4 types DMX terminals for
users’ selection. The following diagram takes 3-pin XLR
as an example, same connecting method for the rest three:
RJ45 & 5-pin XLR & green terminal (with amplifier function).
DMX signal DMX signal
12-24Vdc 12-24Vdc 12-24Vdc
Terminal resistor
LT-924-OLED
LED
DMX/RDM signalDMX/RDM signal
Output port
(Wiring method on P7)
1 2 345678
LED power supply
Power to LEDs1, 2
Power to 3, 4LEDs
Power to 5, 6LEDs
Power to 7, 8LEDs
LT-924-OLED
LED
DMX/RDM signal DMX/RDM signal
1 2 345678
Power to 1, 2LEDs
Power to 3, 4LEDs
Power to 5, 6LEDs
Power to 7, 8LEDs
LED
power
supply
LED
power
supply
LED
power
supply
LED
power
supply
1. Connecting LED lights:
R
CH
1
2
3
G
B
R
CH
1
2
3
G
B
R
CH
1
2
3
G
B
LT-924-OL ED
LT-924-OL ED
LT-924-OL ED
LT-924-OL ED
LT-924-OL ED
LT-924-OL ED
LT-924-OL ED LT-924 -OLED LT-924-O LED
98
*
www.ltech-led.com www.ltech-led.com
3. The connection diagram of 4 kinds of DMX/RDM terminals:
5-pin XLR
connected
in parallel
3-pin XLR
connected
in parallel
Green terminal
connected
in parallel
RJ45
connected
in parallel
Resistor
terminal
Resistor
terminal
Resistor
terminal
Vent
Resistor
terminal
Resistor
terminal
Resistor
terminal
Installation distance > 20mm
These 4 terminals can be connected in a mixed way.
*
Installation attention : please reserve enough ventilation distance between decoders (>20mm),
be sure not to block the vent, or will affect lifetime of decoder for .poor heat dissipation
4. The connection diagram of :AMP signal amplifier terminal
Connecting with green terminal or an extra amplifier will be needed when more than
32 decoders are connected or use overlong signal wire (as shown below).
Signal amplifier should not be more than 5 times continuously.
Address setting table
LT-924 -O LE DLT-924 -O LE DLT-924 -O LE D
LT-924 -O LE D
AMP
Address
quantity
ModeMode DIM DIM
CT CT RGB RGB
81616 32
24 48
8bit 16bit8bit 16bit8bit 16bit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
001 001 001
005 009 013
001 002 002
005 010 014
001 002 003
006
010 015
002 003 004
005
011 016
002 004 005
006 012 017
002 004 006
006 012 018
003 005 007
007 013 019
003 006 008
007 014 020
003 006 009
007 014 021
004 007 010
008 015 022
004 008 011
008 016 023
004 008 012
008 016 024
001
002
001
002
001
002 003
004 005
006
005
006
009
010
005
006
005
006
005
006
007
008
007
008
007
008 009
010
011
012
011
012
011
012
013
014
015
016
017
018
001
002
003
004 003
004
003
004
003
004
003
004
001
002
007
008
007
008
013
014
015
016
015
016
019
020
021
022
023
024
007
008
009
010
009
010
009
010
011
012
011
012
011
012
013
014
013
014
013
014
015
016
015
016
015
016
017
018 025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
019
020
019
020
021
022
023
024
023
024
025
026
027
028
027
028
029
030
031
032
031
032
Resolution Resolution
Address
quantity
Channel Channel
LT-9 24- OLE D LT-924-OLED LT-924- OLE D
LT-9 24-OLEDLT-924-OLED LT-924 -OLED
LED LED LED
…
…
10 11
WIFI-RDM01
www.ltech-led.com www.ltech-led.com
Update Time: 2019.10.08_A4
ac
b
d
Work with RDM editor
LT-924-OLED can work with LTECH RDM editor (Model: WiFi-RDM01) to realize changing the
parameters by long-range setting, wiring diagram as below:
RDM editor App interface instruction
Download the App, setting the LT-924-OLED parameters (frequency, bit, curve, modes, dimming
range, screensaver, etc.) after well connecting the RDM editor, more details, please check the
manual of WiFi-RDM01.
Well installation of products first, then working with WiFi -RDM01 to realize setting parameters
and firmware upgrade by App.
a: click”Add”, edited the address in corresponding box.
b: Click”ID”, get more product details.
c: Click” ”, enter edited interface
d: Click”No.”, issue the recognizing command.
Supporting WiFi-RDM01 upgrade
and DMX driver upgrade.
WiFi-RDM01
upgrade
DMX device
upgrade
5-24Vdc power input
Power bank
available
supply is
LED power supply LED power supply LED power supply
No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact your supplier if any question.
Table of contents
Other Ltech Media Converter manuals
Ltech
Ltech M4-C User manual
Ltech
Ltech LT-932 User manual
Ltech
Ltech LT-840-350 User manual
Ltech
Ltech LT-932-OLED User manual
Ltech
Ltech LT-898 User manual
Ltech
Ltech LT-912 User manual
Ltech
Ltech LT-904 User manual
Ltech
Ltech DIN-DMX-5A User manual
Ltech
Ltech LT-DMX-8806 User manual
Ltech
Ltech LT-903-DIP User manual
Ltech
Ltech LT-916 User manual
Ltech
Ltech LT-904 User manual
Ltech
Ltech LT-905 Operator's manual
Ltech
Ltech LT- 880 User manual
Ltech
Ltech LT-932-OLED User manual
Ltech
Ltech LT-DMX-1809 User manual
Ltech
Ltech LT-8030 User manual
Ltech
Ltech ArtNet-SPI-1 User manual
Ltech
Ltech LT-903 User manual
Ltech
Ltech LT-874-5A User manual
