Ltech LT-995 User manual
Product Introduction: Technical Specs:
www.ltech-led.com
Shortcut / Over load protection
8 bit / 16 bit
3 kinds of DMX interfaces
CHANNELS
LT-995
www.ltech-led.com www.ltech-led.com
12
LT-995
DMX512/RDM
~
×
× 5CH Max. 720W
3-pin XLR, RJ45, green terminal
-30℃~65℃
L169×W80×H39mm
L182×W91×H41mm
550g
12 24Vdc
6A 5CH Max. 30A
(0~72W...144W)
8bit (256 levels) / 16bit (65536 levels)
Shortcut / Over load
Model
Input Signal
Input Voltage
Current Load
:
:
:
Protection:
Working Temperature :
:
:
:
:
:
Output Power :
DMX Interface :
Grey Level
Dimensions
Package Size
Weight (G.W.)
4. With the operations can be completed
via the RDM master console, such as parameters browsing & setting, DMX
address setting, equipment recognition, etc.
RDM remote management protocol,
3. Support 3 kinds of DMX ports : 3-pin XLR, RJ45, green terminal.
2. Easy operation with digital display and the touch buttons.
1. Designed with 5 channels output, and Max. 6A current per channel, up to
720W output power.
5.
function when fault.
With shortcut protection and over load protection, as well as warning
6. With fast self-testing function.
8. 16bit (65536 levels) / 8bit (256 levels) grey level optional.
7. High/low frequency PWM for optional
456
3
www.ltech-led.com www.ltech-led.com www.ltech-led.com www.ltech-led.com
Product Size:
Main Component Descripition:
Wiring Diagram:
3-pin XLR
Connected
in Parallel
RJ45
Connected
in Parallel
Green Terminal
Connected
in Parallel
These 3 terminals can be connected in a mixed way.
4. The connection diagram of :AMP signal amplifier terminal
2 Connecting LED lights:
LT-995 is equipped with 3 types DMX terminals for
users’ selection. The following diagram takes 3-pin
XLR as an example, same connecting method for the
rest two: RJ45 & green terminal (with amplifier
function).
1. DMX console onnectionc :
If the recoil effect occurs because of longer signal line or bad line quality,
please try to connect 0.25W 90-120Ω terminal resistor at the end of each line.
The Unit: mm
RJ45
3-pin XLR
Green terminal
DMX/RDM
input & output
Digital
display
Dip
switch
Green terminal
LED lamps connection
12-24Vdc
Power input
Update Time: 2017.04.18_A0
Digital display Dip switch
Screen
Hig Smooth
Low Std
30S off
Enable
PWM Hz DIM
16
Bit
8
M
<
<
Digital display will enter the locked
mode without operating after 15S.
Long press “M” key to unlock.
Short press “M” key to switch numbers.
Press “ ””v” key to adjust value.
^
3. The connection diagram of 3 kinds of DMX/RDM terminals:
Connecting with green terminal or an extra amplifier will be needed when more than 32
decoders are connected or use overlong signal wire(as shown below).
Signal amplifier should not be more than 5 times continuously.
*
Other manuals for LT-995
2
Other Ltech Media Converter manuals
Ltech
Ltech LT-851-6A User manual
Ltech
Ltech LT-840-700 User manual
Ltech
Ltech LT-830-8A User manual
Ltech
Ltech LT-860-8A User manual
Ltech
Ltech LT-8030 User manual
Ltech
Ltech DIN-DMX-350 User manual
Ltech
Ltech LT-924 User manual
Ltech
Ltech LT-898 User manual
Ltech
Ltech LT-830-8A User manual
Ltech
Ltech LT- 830 User manual
Ltech
Ltech LT-932-OLED User manual
Ltech
Ltech LT-905 Operator's manual
Ltech
Ltech LT-DMX-1809 User manual
Ltech
Ltech ArtNet-SPI-1 User manual
Ltech
Ltech LT-DMX-8806 User manual
Ltech
Ltech LT-932 User manual
Ltech
Ltech LT-995-OLED User manual
Ltech
Ltech LT-905 User manual
Ltech
Ltech LT-903 User manual
Ltech
Ltech LT-858-CC User manual
