Loadrite Sprint User manual
User manual
Loader scales
Sprint
www.loadritescales.com | www.trimble.com
1-1
LOADRITE Sprint User manual
LOADRITE Sprint User manual
Software Number: 60409 Version Number: 2.71
Document Number: MAN-81182-02
Issued Date: June 2015
W: www.loadritescales.com
© 2015 Trimble Navigation Limited. All rights reserved. Trimble, the Globe & Triangle logo are trademarks and/or registered trademarks of Trimble Navigation
Limited, registered in the United States and in other countries. Loadrite is a trademark and/or registered trademark of Trimble Navigation Limited. All other
trademarks and registrations are the property of their respective owners.
The software contains proprietary information of Trimble Navigation Limited; it is provided under a license agreement containing restrictions on use and disclosure
and is also protected by copyright law. Reverse engineering of the software is prohibited.
This document is copyrighted with all rights reserved. Under copyright laws, this document may not be copied in whole or in part, reproduced in any other media,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the express written
permission of Trimble Navigation Limited. Permitted copies must carry the same proprietary and copyright notices as were affixed to the original. Under the law,
copying includes translation into another language.
Published in New Zealand.
1-2
LOADRITE Sprint User manual
IMPORTANT SAFETY INFORMATION
PLEASE READ CAREFULLY BEFORE USING THE LOADRITE™ WEIGHING SYSTEM
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
It is your sole responsibility to place, secure and use the LOADRITE Weighing System in a manner that will not cause accidents,
personal injury or property damage. Always observe safe operating practices.
Do not install the LOADRITE Weighing System in a way that may interfere with the safe operation of the vehicle, or deployment
of safety equipment.
Before you use the LOADRITE Weighing System for the first time, familiarize yourself with the system and its operation.
Do not handle the LOADRITE Weighing System if it is hot. Let the product cool, out of direct sunlight.
Ensure that the LOADRITE Weighing System is connected to a power source with the correct fitting and voltage requirements.
Do not attempt to service the LOADRITE Weighing System as this could result in personal injury.
Removing LOADRITE Weighing System equipment or adding accessories could affect the accuracy of weighing data and
your warranty.
Do not install cables over horizontal surfaces where they may be stood on or hit by falling objects.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage.
Trimble Navigation Limited disclaims all liability for installation or use of the LOADRITE Weighing System
that causes or contributes to death, injury or property damage, or that violates any law.
1-3
LOADRITE Sprint User manual
TABLE OF CONTENTS
1.INTRODUCTION............................................................................................................................1-5
1.1.LOADRITE equipped loader.............................................................................................1-6
1.2.LOADRITE equipped forklift.............................................................................................1-7
1.3.Indicator features..............................................................................................................1-8
1.4.Accurate weighing............................................................................................................1-9
2.THE DAY-TO-DAY WEIGHING PROCESS ................................................................................2-10
2.1.How do I turn on the Indicator? ......................................................................................2-10
2.2.How do I perform a warm-up?........................................................................................2-10
2.3.How do I zero the empty bucket?...................................................................................2-10
2.4.How do I weigh and add a load?....................................................................................2-11
2.5.How do I finish the load?................................................................................................2-13
2.6.How do I put the Indicator into Standby mode?..............................................................2-13
3.READY SCREEN.........................................................................................................................3-14
3.1.The short and long totals................................................................................................3-14
4.PRINTING....................................................................................................................................4-16
5.MENU...........................................................................................................................................5-17
5.1.Setup..............................................................................................................................5-18
5.2.Auto-Add ........................................................................................................................5-18
5.3.Scale # ...........................................................................................................................5-18
5.4.Module............................................................................................................................5-18
5.5.Clock ..............................................................................................................................5-19
5.6.Display............................................................................................................................5-20
5.7.Long Total ......................................................................................................................5-20
5.8.Self test ..........................................................................................................................5-20
5.9.Uplink .............................................................................................................................5-20
5.10.Standby..........................................................................................................................5-21
6.APPENDIX A: SYSTEM SPECIFICATIONS ...............................................................................6-22
6.1.Weighing accuracy.........................................................................................................6-22
6.2.Minimal weighing delay ..................................................................................................6-22
6.3.Power requirements .......................................................................................................6-22
6.4.Physical specifications ...................................................................................................6-22
6.5.Environmental specifications..........................................................................................6-22
6.6.Signal inputs and outputs...............................................................................................6-22
6.7.Clock ..............................................................................................................................6-22
6.8.Output/Input connections ...............................................................................................6-23
7.APPENDIX B: SPAN CALIBRATION ADJUSTMENT................................................................7-24
7.1.Checking the adjustment................................................................................................7-25
1-4
LOADRITE Sprint User manual
8.APPENDIX C: ERROR MESSAGES...........................................................................................8-26
8.1.Bouncing load.................................................................................................................8-26
8.2.Check power ..................................................................................................................8-26
8.3.Check MAG/OPT............................................................................................................8-26
8.4.Check rotary...................................................................................................................8-26
8.5.Check scale#..................................................................................................................8-26
8.6.Check tilt.........................................................................................................................8-26
8.7.Check transducer ...........................................................................................................8-26
8.8.Check zero.....................................................................................................................8-26
8.9.Lift under range..............................................................................................................8-26
8.10.No lock ...........................................................................................................................8-27
8.11.Overload.........................................................................................................................8-27
8.12.Poor lift...........................................................................................................................8-27
8.13.Printer disabled ..............................................................................................................8-27
8.14.Printer error ....................................................................................................................8-27
8.15.Return under range ........................................................................................................8-27
8.16.Speed changed..............................................................................................................8-27
8.17.Speed too high...............................................................................................................8-27
8.18.Tilt too high.....................................................................................................................8-27
8.19.Too heavy, zero aborted ................................................................................................8-28
8.20.Warm-up lift....................................................................................................................8-28
9.APPENDIX D: GLOSSARY.........................................................................................................9-29
10.APPENDIX E: LEGAL INFORMATION.....................................................................................10-31
1-5
LOADRITE Sprint User manual
1. INTRODUCTION
The LOADRITE weighing system measures the weight of loads lifted by wheel loaders, forklift trucks and similar machines that
use hydraulic rams to lift the load. The main parts of the LOADRITE Weighing System are:
the Indicator installed in the cab of the loader, and
the connected sensors installed on the lifting arms.
As a load is lifted, the trigger and hydraulic pressure transducers send information to the LOADRITE Indicator. This information
is converted into a digital weight reading that is displayed on the LOADRITE Indicator.
The LOADRITE Weighing System can add each lifted load to running totals so that Trucks are loaded accurately and daily
productivity levels can be tracked.
The LOADRITE Indicator is the main user interface with the LOADRITE Weighing System.
1-6
LOADRITE Sprint User manual
1.1. LOADRITE EQUIPPED LOADER
Component
Printer (optional)
Remote Add Button (optional)
LOADRITE Indicator
Trigger
Pressure Transducer
1-7
LOADRITE Sprint User manual
1.2. LOADRITE EQUIPPED FORKLIFT
Component
Printer (optional)
Remote Add Button (optional)
LOADRITE Indicator
Trigger
Pressure Transducer
1-8
LOADRITE Sprint User manual
1.3. INDICATOR FEATURES
Icon Name Description
Trigger Light Illuminates when a load is lifted past the trigger point. When this light is on, the
load may be added.
Exit
Cancel
Standby Mode
Moves back one menu screen.
Cancels changes.
Press and hold for 5 seconds to enter Standby mode.
Menu
Up
Displays the Menu.
Moves up a list of options.
Recall
Subtract
Down
Recalls the last load.
Subtracts the current load from the total.
Moves down a list of options.
Add
Enter
Adds the current bucket load to the total.
Turn Auto-Add on or off.
Selects an item.
Accepts changes.
Clear
Left
Clears the short total for the current product.
Scrolls up through values.
Zero Bucket
Right
Zeroes the empty bucket.
Moves the cursor right.
Scrolls down through values.
Other manuals for Sprint
1
Table of contents
