LIVARNO LUX 276249 User manual
LED LIGHTSTRIP KIT
IAN 276249
LED LIGHTSTRIP KIT
Operation and Safety Notes
LED-LICHTLEISTEN-SET
Bedienungs- und Sicherheitshinweise
SÚPRAVA LED SVETELNÝCH LÍŠT
Pokyny pre obsluhu a bezpečnostné pokyny
GB Operation and Safety Notes Page 5
SK Pokyny pre obsluhu a
bezpečnostné pokyny Strana 17
DE/AT/ CH Bedienungs- und Sicherheitshinweise Seite 29
C
A
1
B
2
D
E3 4
5
ca./approx. 20cm
G
3
MAX.
3x
F
6
87
5GB
Introduction.............Page 6
Intended use..................Page 6
Description of parts.......Page 7
Technical details............Page 7
Included items ...............Page 8
Safety
information..............Page 8
Safety advice
for installation.......Page 12
Installation...............Page 12
Mounting the product
on a cupboard ..............Page 13
Mounting the product
on a wall........................Page 13
Operation .................Page 14
Cleaning
and care .....................Page 14
Disposal......................Page 15
Warranty...................Page 15
6 GB
LED lightstrip kit
Introduction
We congratulate you on the purchase
of your new product. You have
chosen a high quality product. The
instructions for use are part of the
product. They contain important
information concerning safety, use
and disposal. Before using the
product, please familiarise yourself
with all of the safety information
and instructions for use. Only use
the unit as described and for the
specified applications. If you pass
the product on to anyone else,
please ensure that you also pass
on all the documentation with it.
Intended use
This product is suitable for use in-
doors. This product is intended for
use in private, domestic enviroment
only and not for commercial pur-
poses. Other uses or modification
of the product shall be considered
as improper use and could lead to
injury or damage. The manufacturer
accepts no liability for loss or dam-
age arising from improper use.
7GB
Description
of parts
1LED light strip
2Connection lead
3Fastening clip
4Dowel
5Screw
6Connector
7In-line switch
8Mains adapter
Technical details
LED light strip +
Mains adapter:
Total power
consumption: approx. 3W
LED light strip:
Operating
voltage: 12V 2.3W
Bulbs per strip: 9 x 0.1W LED
Note: the bulbs
cannot be replaced
LED light strip (Model No.
HG01183A) TÜV/ GS tested.
Mains adapter:
Nom. voltage,
primary: 100–240V∼,
50–60Hz
Nom. voltage,
secondary: 12V ,
0.25A, 3W
Protection class:
8 GB
Mains adapter (Model No.
YNQST120025VL) TÜV/GS
tested.
Included items
3 LED light strip sets
1 Mains adapter
3 Interconnection cables
6 Dowels
6 Fastening clips
6 Screws
6 Double-sided adhesive tapes
1 End cap
1 Operating instructions
Safety
information
DANGER OF
DEATH AND
ACCIDENTS FOR TODDLERS
AND CHILDREN! Never
leave children unsupervised with
the packaging material. The
packaging material represents
a danger of suffocation. Children
frequently underestimate the
dangers. Please keep children
away from the device at all times.
This device is not a toy and
should not be played with by
children. Children are not able
to understand the dangers that
can occur when handling this
device.
9GB
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental capa-
bilities or lack of experience and
knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
Ensure that the product is in-
stalled by suitably experienced
or qualified persons only.
Check before installation that
the supporting surface is suita-
ble for the fastenings and the
weight of the lighting product.
If you have any questions about
the product or are unsure about
any of its aspects, please seek
the advice of an electrical
equipment specialist.
Do not pull on the product
lead. Ensure that it is positioned
to avoid creating a trip hazard.
The product can be used on all
surfaces officially classified as
being of “normal flammability“.
Do not attach any other objects
to the product.
After use store the light fitting in
its original packaging to avoid
causing unintentional damage.
Ensure that the light fitting does
not present a trip hazard.
10 GB
CAUTION! RISK OF OVER-
HEATING! Do not operate
the light fitting while it is still in
the packaging or rolled up.
This lamp is only
intended for use
indoors.
Avoid the danger
of death from
electric shock!
Before use, ensure that the
mains voltage available is the
same as the required operating
voltage for the device
(100–240V∼).
Before connecting to the mains,
always check the product for
any damage.
Never use the product if you
find damage of any kind.
The connecting cable cannot
be repaired! If the cable is
damaged, the product must be
taken out of use and disposed
of in the proper way.
This article does not contain
any parts which can be serviced
by the user. The bulbs cannot
be replaced.
Never open any of the electrical
parts or insert any kind of object
into them.
Protect the product from sharp
edges, mechanical loads and
hot surfaces.
Do not install with sharp
fasteners or nails.
Other manuals for 276249
1
Table of contents
Languages:
Other LIVARNO LUX Lantern manuals
LIVARNO LUX
LIVARNO LUX 311685 Technical specifications
LIVARNO LUX
LIVARNO LUX 106339 Technical specifications
LIVARNO LUX
LIVARNO LUX 43174 User manual
LIVARNO LUX
LIVARNO LUX 295794 Technical specifications
LIVARNO LUX
LIVARNO LUX Z31906 Technical specifications
LIVARNO LUX
LIVARNO LUX 10603A Technical specifications
LIVARNO LUX
LIVARNO LUX 273745 Technical specifications
LIVARNO LUX
LIVARNO LUX 273024 Technical specifications
LIVARNO LUX
LIVARNO LUX HG03508B Technical specifications
LIVARNO LUX
LIVARNO LUX 284725 User manual
