LIV Caliber 11 User manual
User’s Manual
DARE TO LIV
TABLE OF CONTENTS
User’s Manual
Caliber 10
PAGE 3
Caliber 11
PAGE 4
Caliber 12
PAGE 6
Caliber 14
PAGE 9
Caliber 15
PAGE 12
Caliber 16
PAGE 14
Caliber 17
PAGE 19
Caliber 18
PAGE 21
Caring for your LIV Swiss Watch PAGE 24
FAQ PAGE 28
2
3
User’s Manual
THE MOVEMENT
POSITION 1 - Normal position
POSITION 2 - Setting the date
POSITION 3 - Setting the time
Unscrew the crown and pull it to
position 2 and turn clockwise to set
the date. Once date is set, return to
position 1.
Important: Only change date
between 2am and 10pm. Rapid date
correction outside this period could
damage the calendar mechanism.
Unscrew/pull crown to position 3 and
turn to desired time. Once time is set,
push crown back to position 1.
DESCRIPTION:
Made in Switzerland
Powered by a battery
PERFORMANCE:
Standard battery life of 45 months
DISPLAY:
Hours-minutes-seconds
Date window
PARTS OF YOUR NEW WATCH
2
5
Hour hand
Minute hand
Second hand
Date display
Crown, screw down
SETTING YOUR WATCH
Caliber 10 User’s Manual
4
1
3
2
1
3
2
5
4
1
3
2
1
3
Important: Always screw your crown down
completely to preserve water resistance.
4
User’s Manual
THE MOVEMENT
DESCRIPTION:
Made in Switzerland
Functions without a battery; powered
automatically with the movement of your arms
PERFORMANCE:
Balance frequency of 28,800
vibrations per hour (4 Hz)
Power reserve of 38 hours
DISPLAY:
Hours-minutes-seconds
Date window
PARTS OF YOUR NEW WATCH
2
5
Hour hand
Minute hand
Second hand
Date display
Crown, screw down
Caliber 11 User’s Manual
4
1
3
2
5
4
1
3
5
POSITION 1 - Normal position
POSITION 2 - Winding your watch
POSITION 3 - Setting the date
Unscrew crown and pull to position 2.
With the crown in position 2, wind the
watch about 30 times. This will power
the mainspring of your watch. The
rotor will continue to wind the watch
as you wear it and keep the watch
going. The watch has a power reserve
of 38 hours.
Turn crown clockwise to set the date.
Warning: Only change date between
2am and 10pm. Rapid date correction
outside this period could damage the
calendar mechanism.
SETTING YOUR WATCH
2
1
3
2
1
3
4
POSITION 4 - Setting the time
Turn crown to desired time.
Important: To preserve your watch’s
water-resistance, always push or
screw down the crown to position 1
when done.
* When a mechanical self-winding
watch is not worn for a certain amount
of time, its power reserve (in this case,
38 hours) is exhausted and the watch
stops. To restart it, unscrew the crown
to position II and wind the movement
manually by turning the crown 30- 40
times. This will give it a sucient
power reserve to function normally.
4
User’s Manual
CONTINUED
Caliber 11 User’s Manual
6
User’s Manual
THE MOVEMENT
DESCRIPTION:
Made in Switzerland
Functions without a battery; powered automatically with
the movement of your arms
PERFORMANCE:
Balance frequency of 28,800 vibrations per hour (4 Hz)
Power reserve of 48 hours
DISPLAY:
Hours-minutes-seconds
60-second chronograph
30-minute counter
12-hour counter
Date and day in window
or date in window -
varies by model
PARTS OF YOUR NEW WATCH
2
5
Hour hand
Minute hand
Chronograph
Second hand
Date display
Crown, screw down
Caliber 12 User’s Manual
4
1
3
2
5
4
1
3
WATCH FUNCTIONS
Continuous
running seconds
30-minute counter
12-hour counter
Start / stop button
Zero reset button
1
3
2
5
4
1
3
CHRONOGRAPH FUNCTIONS
2
5
4
7
POSITION 1 - Normal position
POSITION 2 - Winding your watch
POSITION 3 - Setting the date
When a mechanical self-winding
watch is not worn for a certain
amount of time, its power reserve (in
this case 48 hours) is exhausted. To
restart, unscrew and pull the crown
to position 2 and wind manually by
turning the crown 30-40 times.
Turn crown clockwise to set the date.
Warning: Do not change date between
8pm and 2am. Rapid date correction
during this period could damage the
calendar mechanism.
SETTING YOUR WATCH
2
1
3
2
1
3
4
POSITION 4 - Setting the time
Turn crown to desired time.
Important: To preserve your watch’s
water-resistance, always push or
screw down the crown to position 1
when done.
4
User’s Manual
CONTINUED
Caliber 12 User’s Manual
Caution: Before each timing, the
hands must be at zero. If necessary,
press button B.
Start: button A (START)
Stop: button A (STOP)
> Time read-out
SINGLE TIMING
2
1
3
Reset to zero: button B
4
A
B
8
CUMULATIVE TIMING
User’s Manual
CONTINUED
Caliber 12 User’s Manual
This function measures several con-
secutive times, adding them to give
the total measured time.
Caution: Before each timing, the
hands must be at zero. If necessary,
press button B.
Start 1st time: button A (START)
CHRONOGRAPH DISPLAY
2
1
3
Stop 1st time: button A (STOP)
> Read 1st time
4
A
B
Start 2nd time: button A (START)
Start 2nd time: button A (STOP) Read
1st and 2nd times, etc
Reset to zero: button B
5
6
7
STARTS TOP RESET
2
1
3
TS
User’s Manual
PARTS OF YOUR NEW WATCH
2
5
Hour hand
Minute hand
Crown, screw down
Date display
Caliber 14 User’s Manual
4
2
5
4
1
3
1
3
Alarm Button
THE MOVEMENT
DESCRIPTION:
Made in Switzerland
Powered by a battery
PERFORMANCE:
Standard battery life of 50 months
DISPLAY:
2 eyes
Multifunction
Alarm
Big date
Small seconds in subdial
9
THE ALARM
POSITION 1 - Normal position
POSITION 2 - Setting the date
POSITION 3 - Setting the time
Screw crown out and pull once to
position 2 and turn to set the date.
Important: The date of the following
day must be set in the calendar
changing phase between 9pm and
12am.
Unscrew/pull crown to position 3 and
turn to desired time. Important: To set
time to the exact second, pull crown
to position 3 when the second hand
is at “60”. Once the hour and minute
hands have been set, push the crown
back to position 1 and screw down to
preserve the water resistance.
SETTING YOUR WATCH
2
1
3
2
1
3
Setting Alarm - 1. Activate alarm mode by holding button A for 2 seconds until the small
minute hand in the Alarm Reference subdial jumps forward 1 minute. 2. Short presses
advance alarm time by a minute. Long presses advance alarm time until the button is released.
IMPORTANT: After setting alarm, it takes 5 seconds for alarm to beep twice to notify you that
it has been set.
Turning Alarm ON/OFF - Briefly press button A to turn alarm on/off.
2 beeps: Alarm is on 1 beep: Alarm is off
User’s Manual
Caliber 14 User’s Manual
CONTINUED
10
This manual suits for next models
7
Table of contents
Other LIV Watch manuals
