Lissmac LWSE 1200 User manual

1/50

OPERATING MANUAL

WALL SAW electric

LWSE 1200

LISSMAC Maschinenbau GmbH

Lanzstrasse 4

D-88410 Bad Wurzach

Telefon +49 (0) 7564 / 307-0

Telefax +49 (0) 7564 / 307-500

[email protected]om

www.lissmac.com

CONSTRUCTION TECHNOLOGY

Page 2

Page 3

Safety

DANGER

Failure to comply with the safety instructions may result in serious injury or even death.

XEnsure that the safety instructions have been read and understood in full.

DANGER

Cuts from the saw blade.

XAlways wear protective gloves when working on the wall saw, particularly when working on

the saw blade.

XAlways use the blade guard when operating the wall saw.

DANGER

Serious injury or material damage as a result of uncontrolled movements of the wall saw.

XNever connect or disconnect cables when the control unit is switched on.

Page 4

Description

Wall saw system

Wall saw für professional use. Not suitable for use in explosion hazard environments.

Wall saw

Components

1 Guide roller 10 Feed motor cable

2 Lock unit 11 Chassis

3 Water supply line 12 Carrying handle / lock unit

4 Blade guard holder 13 Identication plate - Blade drive motor

5 Geared swivel arm 14 Blade drive motor

6 Water - Bypass 15 Feed motor, travel

7 Saw blade holder 16 Water connection

8 Carrying handle 17 Feed motor, swivel

9 Blade drive motor cable

2.1

2.2

Page 5

Assembly / Disassembly

Place the wall saw on the guide rail

2. If the grips fail to engage or the wall saw sits too loosely on the guide rail: adjust the guide

rollers.

Adjusting the guide rollers

* The guide rollers are set correctly when they align in the guide groove and it is possible to

turn them by hand.

3.1

3.2

Page 6

Mounting the drive motor

Mounting the saw blade

DANGER

It can cause death or serious injury if the saw blade flies away.

XOnly use original screws and bolts from LISSMAC.

DANGER

Serious injury can be caused by sudden start-up of the saw blade.

XSwitch o the control unit before working on the saw blade.

XIsolate the control unit from the mains supply.

Preparations for assembly

XDuring initial installation, remove the ush cut anchoring screws on the quick-release ange.

3.3

3.4

3.4.1

Page 7

Preassemble the saw blade unit

The direction of rotation of the saw blade must match the direction of rotation of the

machine. Correct alignment: Countersinking of the fastening holes against the blade

cover.

For normal cuts up to Ø 39” ( Ø 1000 mm)

3.4.2

(30 lbf ft)

(99 Nm)

For normal cuts between Ø 39” and 48"( Ø 1000 -1200 mm)

(30 lbf ft)

(11 lbf ft)

Page 8

Fastening the saw blade unit

DANGER

It can cause death or serious injury if the saw blade comes off.

XCheck whether the sleeve and central screw are countersunk.

XTighten the central screw to a torque of 44 lbf ft (60 Nm).

3.4.3

For ush cuts

(15 Nm)

Page 9

Removing the saw blade unit

WARNING

Injuries can be caused if the saw blade drops down.

XLift out the saw blade unit to the top when removing it.

2. Disassemble the saw blade unit in the reverse order to the assembly process.

Mounting the blade guard

XMount the blade guard according to the instruction leaet.

3.5

3.6

Page 10

Connecting the wall saw to the control unit

9The control unit is isolated from the power supply.

9Connectors/plugs are clean.

9Cables are undamaged.

3.7

Other manuals for LWSE 1200

Table of contents

Other Lissmac Saw manuals

Lissmac

Lissmac COMPACTCUT 300 P User manual

Lissmac

Lissmac UNICUT 600 User manual

Lissmac

Lissmac ATS 350 B 120 User manual

Lissmac

Lissmac Multicut 450 User manual

Lissmac

Lissmac MULTICUT 550 GH User manual

Lissmac

Lissmac COMPACTCUT 905 P/T User manual

Lissmac

Lissmac DTS 1000 H User manual

Lissmac

Lissmac DTS 402 User manual

Lissmac

Lissmac MULTICUT 900 SG User manual

Lissmac

Lissmac LWSE 540 User manual

Lissmac

Lissmac DTS 601 User manual

Lissmac

Lissmac DTS 271 User manual

Lissmac

Lissmac DTS 901-H User manual

Lissmac

Lissmac CC601 E User manual

Lissmac

Lissmac DTS 420 PE/N User manual

Lissmac

Lissmac COMPACTCUT 400 E User manual

Lissmac

Lissmac COMPACTCUT 201 P User manual

Lissmac

Lissmac ATS 120T/600 User manual

Lissmac

Lissmac CC501 E User manual

Lissmac

Lissmac DTS 420 T User manual

Lissmac

Lissmac MULTICUT 400 D User manual

Lissmac

Lissmac COMPACTCUT 501 E User manual

Lissmac

Lissmac ATS 450 User manual

Lissmac

Lissmac MULTICUT 905 SG User manual

Popular Saw manuals by other brands

RIDGID

RIDGID BS1400 owner's manual

ATIKA

ATIKA BWS 400-2 Original instructions

RGC

RGC FS20 instructions

Makita

Makita M2300 instruction manual

IMET Spa

IMET Spa BASIC 300 PLUS SHI Instructions for use

IMET Spa

IMET Spa SIRIO 370 AF-E User instructions

Optimum

Optimum OPTisaw CS 275 operating manual

Makita

Makita BPB180 instruction manual

Stihl

Stihl MS 462 C-M instruction manual

AEG

AEG TS 250 K Original instructions

Meec tools

Meec tools 004665 operating instructions

Makita

Makita LS1018L instruction manual

Ryobi

Ryobi RCS1400 Original instructions

DeWalt

DeWalt DCS391 instruction manual

Sealey

Sealey SA72 instructions

skilsaw

skilsaw SPT88 Operating/safety instructions

Urrea

Urrea SI810 User manual and warranty

EINHELL

EINHELL BKG 210/1 operating instructions