6/28
Use the special LISSMAC diamond saw blade for dry cuts on the
masonry saw only.
A sales list of saw blades can be requested from LISSMAC.
Do not cut with toothed saw blades.
The saw blades require a statement of direction of rotation.
Saw blade diameter, saw blade speed and mounting diameter need to
be matched to the machine (see section 2.3).
Do not use damaged saw blades
1.2 Principle of intended use
1.2.1 The masonry saw is exclusively designed for the dry cutting of large-sized
building blocks made of mineral materials. Use only building blocks that are
not suitable for cutting in wet process.
Please note that Poroton and vertical coring bricks can differ from the
composition and the bulk density (hardness), depending on the
manufacturer. The wear on the saw blade is too heavy with the use of hard
Poroton and vertical coring bricks and is therefore not recommended.
The operation of the masonry saw is only permitted with the use of a
corresponding dust extraction system. The dust extraction system used for
cutting the building blocks must also be permitted.
The cutting of wood, metal, plastics or other types of stone is not
allowed!
The manufacturer/supplier cannot accept any liability for damage caused by
unintended use.
Intended use also includes compliance with the operating manual and
compliance with the inspection and maintenance requirements.
The machine must only be used if it is in technically perfect condition and for its
intended use, with an awareness of safety and potential dangers and as set out
in
the operating manual! In particular, faults which may adversely affect its safety
must be rectified immediately.
This masonry saw is only safe
if it is used with saw blades, designed for this machine
