1、USB interface
2、WAN interface
3、LAN interface 1
4、LAN interface 2
5、LAN interface 3
6、LAN interface 4
7、Power switch
2. Installation and Commissioning
1. Remove the LipRouter from the packaging and place it on a stable desktop.
2. Take out the power adapter and connect it to the DC 19V interface on the left side of the
LipRouter.
3. Take out 4 WIFI antennas and connect them to the 4 WIFI antenna interfaces of the
LipRouter.
4. Connect the USB 4G network card to any USB interface of the LipRouter.
5. Use a network cable from the Internet to the WAN interface of the LipRouter.
6. Switch on the power switch of the LipRouter to start the device. As shown below:
7. After entering the main interface, please click the "Settings" icon button in the lower right
corner to enter the setting interface.
8. In the setting interface, click the "Bonding account" button, enter the account / password or
scan the QR code to log in, and then you can use the bonding function, as shown in the figure
below:
9. In the setting interface, click the "WAN" button, you can set to automatically assign or
manually assign an external network IP address.
10. In the setting interface, click the "WIFI" button, manually enter the network name and
connection password of the WIFI hotspot, and select 2.4G / 5.8G and secure connection
mode to share the WIFI hotspot, as shown in the figure below:
