Linksys FGW5500 User manual

Linksys 5G WiFi 6 Router

Quick Start Guide

FGW5500

5G WiFi 6 Router

LED Indicators

LED Indication

Color

Status

Description

Bottom LED -

5G/LTE/3G/Ethernet

Wan/Alarm

Blue

5G (SA/NSA) On

Device connects to 5G network

Green

LTE/3G On

Device connects to LTE/3G network

Orange

Ethernet WAN

Device connects to Internet via Ethernet WAN

Red

Alarm

System Alarm ON

• No SIM card detect

• No Internet available

• Failed to boot up system

OFF

Power OFF

Middle LED –

WiFi/WPS enabled

Blue

• LED ON for either 2.4GHz, 5GHz, or Both have been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the WiFi

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the WiFi LED color is Green.

• Blinking, WiFi WPS process, (1 sec on, 1 sec off)

Blinking

Green

Blinking

OFF

Both 2.4GHz AND 5GHz are disabled

Top LED – Voice SIP or

VoLTE enabled

Blue

• LED ON for either SIP or VoLTE has been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the Voice

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the Voice LED color is Green.

• Blinking, SMS/Missed process. (2 sec on, 2 sec off)

Blinking

Green

Blinking

OFF

Both Voice SIP AND VoLTE didn’t register

Booting

Blue

• 10 seconds initial setup on bottom LED with solid BLUE

• Then 2 mins 40 sec for LED chasing on 3 LEDs chasing with BLUE

Firmware Upgrade

Blue

All LEDs in Chasing Pattern with blue color

Reset

Blue

All LEDs in Blinking with blue color

Product Overview

○

1 Power Input

○2 Power on/off Switch

○3 2.5GbE LAN Port

○4 1GbE LAN Port

○5 USB Port (Reserve)

○

6 FXS Port

○7 WPS button

○8 SIM Slot

○9 Reset button (press 5 sec for

reset to default)

Installation

Please follow the steps below to install the router:

Step1: Insert SIM card into the router with direction shown below until it clicks.

Step2: Connect one of the LAN ports (any will do) on the router to your PC with a RJ-45 Ethernet cable

provided.

Step3: Insert the power cord into the DC-12V power jack of the router; and insert the correct plug into

your home’s power outlet.

Step4: Switch ON the power. The router will start the booting process. After a few seconds, the LED

lights will start blinking with blue color.

Step5: When the router has booted up, you will see the following LED lights on in solid color: the LTE

(Green) or 5G (Blue). You can now connect your devices to the router via Ethernet or over WiFi.

The WiFi network name SSID and Key can be found on the label underneath the router.

Note:

1. To remove the SIM card, please press the card in until it clicks, and it will pop out automatically.

2. Do not remove the SIM card when the router is operating.

Advanced Setup

If you would like to change any of the router default settings, such as the WiFi network name SSID or Key,

please access the browser on a device that is connected to the router.

Step 1. Open the Web browser and enter the default IP address of FGW5500:

https://192.168.15.1

Step 2. Enter username/password to access the web management interface.

Username: user

Password: the Password mentioned on the bottom of the unit

The page displays in your browser after logging in. You can then configure the settings by following

installation wizard accordingly.

Step 3. For more features setup, please refer to user manual on https://www.linksys.com/linksys-

support

LNKPG-00978 Rev. A00

Other manuals for FGW5500

Table of contents

Other Linksys Network Router manuals

Linksys

Linksys RV042 Original operating instructions

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router User manual

Linksys

Linksys Velop WHW01 User manual

Linksys

Linksys RVS4000 Operation manual

Linksys

Linksys E56000 User manual

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router User manual

Linksys

Linksys Etherfast User manual

Linksys

Linksys SPA2100 User manual

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Quick start guide

Linksys

Linksys SPA2102-AN - Single Port Router User manual

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router User manual

Linksys

Linksys RVL200 Instructions for use

Linksys

Linksys WRK54G User manual

Linksys

Linksys SFE2010P Operation manual

Linksys

Linksys EA9300 User manual

Linksys

Linksys EA5800 User manual

Linksys

Linksys EA4500 User manual

Linksys

Linksys RV082 Operation manual

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Operation manual

Linksys

Linksys RV0041 - 10/100/1000 VPN Router User manual

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... User manual

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router User manual

Linksys

Linksys MR8300 User manual

Linksys

Linksys EA6500 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview