Linksys AM300 User manual
1
Modem Conguration Guide
Linksys AM300 ADSL/ADSL2+ Modem/Router
Conguring in Layer2 PPPoE for Windows XP and 2000
CONTENTS
1. Equipment Checklist
2. Network Configuration
3. Restore Modem to Factory Defaults
4. Connecting using Ethernet
5. Changing password
1. EQUIPMENT CHECKLIST
A. Please check the Box and make sure you have the following:
· Linksys AM300 ADSL/ADSL2+ Modem/Router
· Power Supply
· RJ11 Telephone Cable
· Ethernet network cable
· USB cable
· Linksys AM300 CD-Rom and User Guide
· Line Filter
B. Please follow one of the diagrams on the Quick Reference Guide (which came with your modem), to set up your
equipment. The diagram you choose to follow will depend on how many walls sockets and the type of socket you
have .Your PC should be turned off during this process.
C. After you have connected your modem to your PC and telephone line, please start your PC.
2. NETWORK CONFIGURATION
PPPoE connection does not require you to have an IP
address or DNS settings manually encoded on your network
card. PPPoE connection uses authentication to establish
the Internet connection and its after doing this that your
modem is assigned an IP and DNS settings from TPG.
To begin, your PC needs to receive a private IP address
from the modem. Most ADSL routers have DHCP enabled
by default that will take care of this.
To ensure your Network Card is ready for this, please follow
the following steps:
A. Click on Start -> Settings -> Control Panel -> Network
Connections
B. Find your Network Card then right click on this and select
Properties
C. Double click on Internet Protocol TCP/IP
D. Ensure “Obtain an IP address automatically” is selected
E. Ensure “Obtain DNS server address automatically” is
selected
F. Click on OK
Linksys AM300
2
3. RESTORE MODEM/ROUTER TO FACTORY DEFAULTS
PLEASE NOTE: By doing this step you will be deleting any
additional customised settings (if applicable) in your
modem, for example port forwarding. You can change the
configuration of your modem to PPPoE without restoring
the modem to factory defaults in which case please skip
this step and proceed from step 4 however if you experience
Internet problems after competing the setup, we recommend
you do perform step 3 then proceed from step 4
A. Make sure your modem is powered on and connected to
your PC (Network card) via Straight through Ethernet cable.
B. Use a paper clip to depress the reset button at the back of
your modem for 10 seconds and release. At this point the
reset is in progress. Please do not power off the unit.
C. When the indicator lights return steady, the reset is
complete. Your modem is now at factory defaults.
4. CONNECTING USING ETHERNET
A. Connect the Ethernet cable from the back of the unit into an
Ethernet on your computer. Connect the power supply to the
Linksys AM300 and switch the modem on.
B. Open a browser window and type http://192.168.1.1 into the
address bar and click goes.
C. In the login box enter the Username and Password (by
default this is admin for both).
Modem Conguration Guide Linksys AM300
3
D. In the following screen select the third option
Encapsulation RFC 2516 PPPoE and enter your TPG
Username and Password in the relevant field
E. In the same screen click Save Settings.
If you had a previous TPG Dialup account, then your
Password will be the same as your Dialup account
password.
F. Wait for the modem to save the configuration.
G. Your modem is now configured. After this confirmation, wait
approximately 2 minutes for your modem to connect to TPG.
You should see the INTERNET light on your modem become solid
green.
H. To browse web sites, please now launch your browser.
5. CHANGING PASSWORD
For security purpose we highly recommend you to change your password. Go to the following link to change your password:
https://cyberstore.tpg.com.au/your_account/?function=changepassword. Activation of your new password will take approxi-
mately 15 minutes. You will then need to enter your new password by following the steps from 4.
Modem Conguration Guide Linksys AM300
13 14 23tpg.com.au/support
PLEASE NOTE:
ADSL routers will by default be capable of automatic authentication. This means your router will use your credentials you
have provided to make the Internet connection. Each time your router is powered on, it will initialize this automated
authentication process after which your router will receive a public IP address (fixed or dynamic depending on your plan) and
DNS settings from TPG
Other manuals for AM300
3
Table of contents
Other Linksys Network Router manuals
Linksys
Linksys EA9200 User manual
Linksys
Linksys EA4500 User manual
Linksys
Linksys MR8300 User manual
Linksys
Linksys R74 User manual
Linksys
Linksys EF3508 User manual
Linksys
Linksys LRT224 User manual
Linksys
Linksys E900 User manual
Linksys
Linksys MAX-STREAM EA8300 User manual
Linksys
Linksys WRT320N - Wireless-N Gigabit Router Wireless User manual
Linksys
Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... User manual
Linksys
Linksys Instant PowerLine PLEBR10 Original operating instructions
Linksys
Linksys MR2000 Series User manual
Linksys
Linksys BEFSR81 - EtherFast Cable/DSL Router User manual
Linksys
Linksys VELOP User manual
Linksys
Linksys BEFSR81 - EtherFast Cable/DSL Router User manual
Linksys
Linksys E900 User manual
Linksys
Linksys SFE1000P Instruction Manual
Linksys
Linksys BEFVP41 - EtherFast Cable/DSL VPN Router User manual
Linksys
Linksys BEFSR11 - EtherFast Cable/DSL Router Guide
Linksys
Linksys RTP300 - Broadband Router With 2 Phone Ports User manual
