Linksys WET54G V3 User manual

A Division of Cisco Systems, Inc.

Model No.

Wireless

Quick Installation Guide

WET54G v3 (EU/UK/LA)

Ethernet Bridge

Wireless-G

Package Contents

• Wireless-G Ethernet Bridge

•SetupCD-ROM

• User Guide on CD (English only)

• Quick Installation Guide

• Detachable Antenna

• RJ-45 Network Cable

• One Pair of Bridge Stands

• Power Adapter

GHz

2802.11g

AAttach the detachable

antenna.

BPlug the included Ethernet

network cable into the LAN port

on the back panel of the

Bridge.

CPlug the other end of the

Ethernet network cable into the

RJ-45 port of the hub, switch,

or PC you wish to use to

configure the Bridge.

DPlug the supplied power

adapter into the Power port on

the back panel of the Bridge.

Then plug the other end into

an electrical outlet.

EThe Power LED will light up after

the Bridge is powered on. While

the Bridge is booting up and

performing a self-test, the

Power LED will flash. It should

stop flashing within twenty

seconds and remain lit.

Connect the Wireless-G Ethernet

Bridge for Setup

AInsert the Setup CD-ROM into

your PC’s CD-ROM drive. The

Setup Utility should run

automatically, and the

Welcome screen should

appear. If it does not appear,

click the Start button and

choose Run. In the field that

appears, enter D:\setup.exe (if

“D” is the letter of your CD-ROM

drive).

BClick Setup to begin the setup

process.

CMake sure the Bridge is

correctly connected to your

wired network. Click Next.

DThe screen displays a list of

Wireless-G Ethernet Bridges on

your network, along with their

status information. Select the

Bridge you are currently

installing by clicking its name in

the Selection box. Click Yes.

EA Password screen will appear.

In lowercase letters, enter

admin in the Password field.

Then click Enter.

Set up the Wireless-G

Ethernet Bridge

FThe Mode Settings screen will

appear. Select Infrastructure if

you want your wireless

computers to communicate

with computers on your wired

network using a wireless access

point. Select Ad-Hoc if you

want wireless computers to

communicate directly with

each other.

In the WB Name field, enter a

unique name for the Bridge.

Click Next.

GOn the Wireless Settings

screen, enter your wireless

network’s SSID. If you chose Ad-

Hoc mode, select the channel

that your network uses.

If you have Wireless-G

(802.11g) and Wireless-B

(802.11b) devices in your

network, then keep the default

Network Mode setting, Mixed.

If you have only Wireless-G

devices, select G-Only. Then

click Next.

HThe IP Settings screen will

appear. If your network has a

DHCP server, select

Automatically obtain an IP

address (DHCP). Click Next

and proceed to step I.

If your network does not have a

DHCP server, select Set IP H

configuration manually. Enter

an IP Address, IP Mask (also

known as Subnet Mask), and

Gateway. You must specify an IP

address. If you are unsure about

the IP Mask and Gateway, leave

the default settings. Click Next

and proceed to step I.

IThe Security Settings screen will

appear. Choose from WEP or

WPA PSK. If your network has WEP

encryption enabled, then select

the level of WEP encryption,

and enter a Passphrase. The

WEP key will be automatically

generated. If you want to

manually enter the WEP key,

leave the Passphrase field blank

and enter the WEP key in the Key

1field. If your network has WEP

encryption disabled, keep the

default, Disabled. Then click

Next.

If your network has WPA PSK

enabled, then select WPA PSK

from the drop-down menu.

Select TKIP for the algorithm,

then enter a Pre-Shared Key of

8-32 characters. Click Next.

JReview your settings on the

Confirmation screen. Write

down the Bridge’s IP Address if

you want to access the Bridge’s

Web-based Utility. Click Yes to

save these settings.

KOn the Congratulations screen,

click Exit.

NOTE: The default IP address of

the Bridge is 192.168.1.226.

NOTE: For more security infor-

mation, refer to “Appendix B:

Wireless Security.” in the User

Guide on the CD-ROM.

AAfter configuration, unplug the

power adapter from the

electrical outlet, and unplug

the Ethernet network cable

from the PC.

BPlug the Ethernet network

cable into the RJ-45 port on

the Ethernet-ready network

device you wish to add to the

wireless network.

CPlug the power adapter into a

local electrical outlet.

Congratulations! The installation of

the Wireless-G Ethernet Bridge

is complete.

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

WET54G_V3-EU-UK-LA-QIG-51021 TE

NOTE: The Bridge features Power over

Ethernet (PoE) support. PoE technology

allows a PoE adapter (also known as a

power injector, power hub, or inline

power device) to supply data and power

to an Ethernet device using a single

Ethernet network cable. To use the

Bridge’s PoE feature, follow the instruc-

tions for your specific PoE device.

Connect the Wireless-G Ethernet

Bridge for Network Use

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

A Division of Cisco Systems, Inc.

Modelnr.

Trådløs Installationsvejledning

Trådløs

Installationsvejledning

Modelnr.

WET54G (DK) v3

Ethernet bridge

Trådløs-G

Pakkens indhold

• Trådløs-G Ethernet bridge

• Installations-cd-rom

• Brugervejledning (kun på engelsk) på cd

• Installationsvejledning

• Aftagelig antenne

• RJ-45-netværkskabel

• Et stativ til enheden

• Strømforsyning

GHz

2802.11g

AMonter den aftagelige

antenne.

BTilslut det medfølgende

Ethernet-kabel til LAN-porten

på bridge'ens bagpanel.

CTilslut den anden ende af

Ethernet-kablet til RJ-45-porten

på den hub, switch eller pc,

som du vil bruge til

konfiguration af bridge'en.

DTilslut den medfølgende

strømforsyning til strømstikket

på bridge'ens bagpanel. Tilslut

derefter den anden ende til en

stikkontakt.

Tilslutning af trådløs-G Ethernet

bridge'en inden konfiguration

APlacer installations-cd-rom'en i

pc'ens cd-rom-drev. Den

guidede konfiguration køres

automatisk, og skærmbilledet

Welcome (Velkommen) vises.

Hvis det ikke er tilfældet, skal

du klikke på knappen Start og

vælge Run (Kør). Indtast

D:\setup.exe i det felt, der vises

(hvis "D" er bogstavet for cd-

rom-drevet).

BKlik på Setup (Konfiguration) for

at begynde konfigurationen.

CKontroller, at bridge'en er

korrekt tilsluttet til det

kabelbaserede netværk.

Klik på Next (Næste).

DPå skærmen vises en liste over

trådløs-G Ethernet bridges i

netværket samt

statusoplysninger for hver

bridge. Vælg den bridge, du

er ved at installere, ved at

klikke på dens navn i feltet

Selection (Valg). Klik på

Yes (Ja).

Konfiguration af trådløs-G

Ethernet bridge'en

EDer vises et skærmbillede, hvor

du kan indtaste en

adgangskode. Indtast admin

med små bogstaver i feltet

Password (Adgangskode) Klik

derefter på Enter.

FSkærmbilledet Mode Settings

(Tilstandsindstillinger) vises. Vælg

Infrastructure (Infrastruktur), hvis

dine trådløse computere skal

kommunikere med computere

i det kabelbaserede netværk

ved hjælp af et trådløst

access point. Vælg Ad-Hoc

(Ad-hoc), hvis de trådløse

computere skal kommunikere

direkte med hinanden.

Indtast et entydigt navn i feltet

WB Name (WB-navn). Klik på

Next (Næste).

GIndtast netværkets SSID i

skærmbilledet Wireless Settings

(Trådløse indstillinger). Hvis du

vælger Ad-Hoc-tilstand, skal du

vælge den kanal, netværket

bruger.

Hvis du har trådløs-G- (802.11g)

og trådløs-B-enheder (802.11b)

i netværket, skal du beholde

standardindstillingen for Network

Mode (Netværkstilstand): Mixed

(Blandet). Hvis du kun har

Trådløs-G-enheder, skal du

vælge G-Only (Kun G). Klik

derefter på Next (Næste).

Other manuals for WET54G V3

Table of contents

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview