Linksys AM200 User manual
Model No.
Quick Installation Guide
WIRED
Package Contents
•ADSLModem
• Power Supply
• User Guide on CD-ROM
• Telephone Cable
• Ethernet Cable
ADSL Modem
AM200 (EU/LA)
2
1Connecting the ADSL Modem
In Step 1, you will connect the
Modem to your ADSL line and to
the computer in your home or
business.
AConnect one end of the
provided phone cable to
the DSL port (RJ-11 port)
that is on the back of the
Modem (Figure A).
BConnect the other end of
the provided phone cable
to the wall jack with ADSL
service.
A
NOTE: Make sure you only place
the microfilter or splitter between
the telephone and wall jack and not
between the Modem and wall jack.
Contact your Internet Service
Provider for additional details.
There are two ways to configure the Modem. Choose one of the
following:
Use this Quick Installation guide - If you wish, you can use the Modem’s
web-based utility to install the Modem. Proceed to Step 1, and follow the
Quick Installation’s instructions.
Run the Setup CD-ROM - If you wish, you can use the Setup CD-ROM to
install the Modem. Insert the Setup CD-ROM into the CD-ROM drive, and
follow the on-screen instructions (Windows 2000 & XP Users only).
CConnect one end of the
provided Ethernet cable to
your PC’s Ethernet adapter
(Figure C).
DConnect the other end of
the cable to the Ethernet
port on the back of the
Modem (Figure D).
EConnect the power
adapter to the Modem
(Figure E).
FConnect the power
adapter to the electrical
outlet.
The connection of the Modem is
complete.
E
D
C
NOTE: If your PC’s Ethernet
adapter is not set up, refer to the
Ethernet adapter’s user guide for
more information.
4
2Configuring the ADSL Modem
In Step 2, you will configure your
Linksys Modem to be able to
gain access to the Internet
through your Internet Service
Provider (ISP). You will need the
setup information provided by
your ADSL ISP. If you do not have
this information, please contact
them before proceeding.
AOpen your web browser.
(You may get an error
message at this point.
Continue following these
directions.) Enter
http://192.168.1.1 in the
web browser’s Address
field. Press the Enter key.
BA Login window, shown in
Figure B, will appear. Enter
admin in lowercase letters
in the User Name field, and
enter admin in lowercase
letters in the Password field
(admin is the default user
name and password.) Click
the Login button.
A
NOTE: You only need to configure
the Modem once.
B
5
CThe Basic Setup screen will
appear with the Setup tab
selected. Based on the
setup instructions from your
ISP, you may need to
provide the following
information.
ADSL Settings. The Modem
supports the following
Encapsulations: RFC 1483
Bridged, RFC 1483
Routed, RFC 2516 PPPoE,
RFC 2364 PPPoA and
Bridged Mode Only. Each
Basic Setup screen and
available features will differ
depending on what type of
encapsulation you select.
VC Settings. Virtual Circuits
(VPI and VCI): These fields
consist of two items: VPI
(Virtual Path Identifier) and
VCI (Virtual Channel
Identifier). Your ISP will
provide the correct settings
for these fields.
Multiplexing: Select LLC or
VC, depending on your ISP.
Your ISP will provide the
correct settings.
C
6
1 RFC 1483 Bridged
Dynamic IP Address
If your ISP says that you are
connecting through a dynamic
IP address, perform these steps:
aSelect RFC 1483 Bridged
for the Encapsulation.
bSelect Obtain an IP
Address Automatically as
the IP Setting.
cClick the Save Settings
button to save the settings.
Static IP Address
If your ISP says that you are
connecting through a static or
fixed IP address, perform these
steps:
aSelect RFC 1483 Bridged
for the Encapsulation.
bSelect Use the following IP
Address as the IP Setting.
cEnter the IP Address and
the Subnet Mask.
dEnter the Default Gateway
address.
Dynamic IP Address
Static IP Address
7
eEnter the DNS in the
Primary and/or Secondary
fields. You need to enter at
least one DNS address.
fClick the Save Settings
button to save the settings.
2 RFC 1483 Routed
If your ISP says that you are
connecting through RFC 1483
Routed using a static IP address,
perform these steps:
aSelect RFC 1483 Routed
for the Encapsulation.
bEnter the IP Address and
the Subnet Mask.
cEnter the Default Gateway
address.
dEnter the DNS in the
Primary and/or Secondary
fields. You need to enter at
least one DNS address.
eClick the Save Settings
button to save the settings.
RFC 1483 Routed
8
3 RFC 2516 PPPoE or RFC
2364 PPPoA
If your ISP says that you are
connecting through PPPoE or
PPPoA, or if you normally enter a
user name and password to
access the Internet, perform
these steps:
aSelect RFC2516 PPPoE or
RFC 2364 PPPoA as
appropriate for the
Encapsulation.
bIf you selected PPPoE, enter
the Service Name (if
required).
cEnter the User Name (if
required).
dEnter the Password.
eSelect Keep Alive if you
always want to be
connected to your ISP, or
select Connect on
Demand if you are
charged for the time that
you are connected to your
ISP.
fClick the Save Settings
button.
PPPoA
PPPoE
9
DCongratulations! You’ve
successfully configured the
Modem. Test the setup by
opening your web browser
from your computer and
entering: www.linksys.com/
registration
EIf you are unable to reach
our website, you may want
to review the installation
and configuration sections
in this Quick Installation or
refer to the Troubleshooting
section of the User Guide.
AM200 EU/LA-QIG-60503NC RR
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Product Registration
http://www.linksys.com/registration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
Modelnr.
Installationsvejledning
WIRED
Pakkens indhold
•ADSL-modem
• Strømforsyning
• Brugervejledning på cd-rom
• Telefonledning
• Ethernet-kabel
ADSL-modem
AM200 (DK)
Other manuals for AM200
1
Table of contents
Other Linksys Modem manuals
Linksys
Linksys BEFCMU10 - Cable Modem With USB User manual
Linksys
Linksys ADSL2MUE User manual
Linksys
Linksys USBDSL1 User manual
Linksys
Linksys USB2128M Original operating instructions
Linksys
Linksys AM200 User manual
Linksys
Linksys CM100 - Cable Modem With USB User manual
Linksys
Linksys BEFCMU10 - Cable Modem With USB User manual
Linksys
Linksys USBM128M User manual
Linksys
Linksys HA1000 User manual
Linksys
Linksys WCG200 - Wireless-G Cable Gateway Wireless... User manual
Linksys
Linksys CM30XX User manual
Linksys
Linksys WAG54GP2 User manual
Linksys
Linksys BEFCMU10 - Cable Modem With USB User manual
Linksys
Linksys AM300 User manual
Linksys
Linksys AM300 User manual
Linksys
Linksys USBDSL1 User manual
Linksys
Linksys CG7500 User manual
Linksys
Linksys BEFCMU10 - Cable Modem With USB User manual
Linksys
Linksys ADSL2MUE Operation manual
Linksys
Linksys CM3008 User manual
