Lindy 70586 User manual

Table of contents

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide

70586

PCI 32 bit P&P

2S (16C650 32FIFO)

1P (ECP/EPP 32FIFO)

www.lindy.com

ž PAGE − 2

u

Description

The 70586 32Bit PCI bus Plug & Play 2S/1P I/O card is equipped with two

High-Speed RS-232.V24 Standard Serial Interfaces and one

ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. The serial

ports include 32 Byte FIFO with a speed up to 921Kb/Sec. 70586 has two 9 pin

male connectors for attaching peripherals´ units with Serial RS-232 Standard

Interface and one 25 pin female connector for peripherals' units with IEEE 1284

CENTRONICS Parallel Interface.

u

Hardware Specification

Serial Port:

UART Chipset: SUN1889, Hardware FIFO is 32Byte FIFO

Compatible chips: with 16C650, 16C550, and 16C450.

IEEE standard: RS-232 Interface

Driver Chipset: TI-75232, speed up to 100Kb/Sec, length 300-500M.

Max. Speed: Up to 921Kb/Sec (HYPER Terminal program)

Parallel Port:

Parallel Chipset: SUN1689, Hardware FIFO is 32Byte FIFO

Compatible chips: with ACC3203, ST-78C36, and HT6535.

IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface

Max. Speed: Up to 2MB/Sec

u

Hardware Installation

½

Turn off the power of your computer

( Plug the 70586 Serial adapter into the PCI bus of your computer

( Connect the peripheral Printer, Modem, Scanner…etc.) to this adapter

( Turn on the power of your computer

PCI device listing display (for example…)

Bus No Device No Func No Vendor ID Device ID Device Class IRQ

0 7 1 8086 7010 IDE Controller 14

0 13 0 1409 7168 Simple COMM.

Controller

10

žPAGE −3

When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs,

please change the PCI slot.

After correct hardware installation you can start installing the software from the driver

CD.

u

Pin Assignments

Parallel 25 Pin female connector pin assignments:

Parallel 25 Pin female connector :

Pin Signal Pin Signal Pin Signal

1 STROBE 10 ACKNOWLEDGE 19 GROUND

2 DATA 0 11 BUSY 20 GROUND

3 DATA 1 12 PAPER EMPTY 21 GROUND

4 DATA 2 13 SELECT 22 GROUND

5 DATA 3 14 AUTO FEED 23 GROUND

6 DATA 4 15 ERROR 24 GROUND

7 DATA 5 16 INIT 25 GROUND

8 DATA 6 17 SELECT INPUT 26 GROUND

9 DATA 7 18 GROUND

Serial 9 Pin male connector pin assignments:

Serial 9 Pin male connector :

Pin Signal Pin Signal Pin Signal Pin Signal

1 CD 4 DTR 6 DSR 8 CTS

2 RD 5 GROUND 7 RTS 9 RI

3 TD

u

Technical Specification

Compatibility: PCI 32Bit card for 486/586/Pentium/Pentium-II/

P-III/C5/K6

Operating system: WIN 9.x/ME/NT/2000/XP, LINUX, DOS

Chips: 1 x SUN1889, 1 x SUN1689

Connections: 2 x DB 9 m connector serial

1xDB25Bfconnectorparallel

PCB: 2 Layer / 120 x 76 mm

žPAGE −4

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operations.