Lindy 70555 User manual

Table of contents

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide

PCI 32 bit P&P

2S (16C550 16FIFO)

www.lindy.com

All manuals and user guides at all-guides.com

2

u

Description

The 70555 3V 32Bit PCI bus Plug & Play 2S I/O card is equipped with two

High-Speed RS-232.V24 Standard Serial-Interface, The serial port include 16

Byte FIFO, The speed Up to 460Kb/Sec. The 4036A3V include two 9 pin male

connector for attaching peripheral’s unit with Serial RS-232 Standard Interface.

u

Hardware Specification

Serial Port:

UART Chipset: SUN1889, Hardware FIFO is 16Byte FIFO,

Compatible chips: with 16C550 and 16C450.

IEEE standard: RS-232 Interface

Driver Chipset: TI-75232, speed up to 100Kb/Sec, length 300-500M.

Max. Speed: Up to 460Kb/Sec (HYPER Terminal program)

u

Hardware Installation

½

Turn off the power of your computer

½

Plug the 70555 Serial Adapter to the PCI bus of your computer

( Connect the peripheral (Printer, Modem, Scanner…etc. to this adapter

( Turn on the power of your computer

PCI device listing display (for example…)

Bus No Device No Func No Vendor ID Device ID Device Class IRQ

0 7 1 8086 7010 IDE Controller 14

0 13 0 1409 7168 Simple COMM.

Controller 10

When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error

occurs, please change the PCI slot.

After correct hardware installation you can start installing the software from the

driver CD.

All manuals and user guides at all-guides.com

3

u

Pin Assignments

Serial 9 Pin male connector pin assignments:

Serial 9 Pin male connector (S1 and S2):

Pin Signal Pin Signal Pin Signal Pin Signal

1 CD 4 DTR 6 DSR 8 CTS

2 RD 5 GROUND 7 RTS 9 RI

3 TD

u

Technical Specification

Compatibility: PCI 32Bit card for 486/586/Pentium/Pentium-II/

P-III/P4/C5/K6

Operating system: WIN 9.x/NT/2000/XP, LINUX, DOS

Chips: 1 x SUN1889

Connections: 2 x DB 9 m connector serial

PCB: 2 Layer / 120 x 76 mm

u

Support

Support pure 3 volt motherboard only

All manuals and user guides at all-guides.com

4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operations.

All manuals and user guides at all-guides.com