LG T60SK Series User manual
ENGLISH
OWNER'S MANUAL
WASHING
MACHINE
Please read this manual carefully before operating
Washing Machine and retain it for future reference
T60SK*
T65SK*
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
www.lg.com
MFL68486521
Rev.00_210720
T7585*
T70SK*
ontents
C
I ro on
6
3
Identification of Parts 7
8
9
11
12
15
16
17
17
18
18
R
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Washing Programs
Page No
Additional Function
Program
Care,Maintenance
& Troubleshooting
Installation Check Sheet
18
Option Washing
18
Tub Clean
Other Useful Functions
18
18
19
Earthing 20
Cleaning and Maintenance
20
Disposal of old appliance
24
Common washing problems
24
Installation Check Sheet
31
Features & Specifications
Features & Specifications
Terms of Warranty
Warranty
Use of Handle Locker
22
* Product feature may vary according to different models. Refer page 31 for modelwise
features for your purchased model.
26
27
29
Smart DiagnosisTM
2
Troubleshooting
25
Normal
Gentle (Wool)
Quick Wash
Strong (Jeans) Wash
Pre Wash + Normal wash
Rinse+
Aqua Reserve
18
B St rt Wash
Safety Information
Preparation Before Washing
Special Guide for Stain Removal
Control Panel
Product Features
Installation
Connecting water supply Hose & Drain Hose
Use of Water, Detergent, Bleach and Softener
Placing, Leveling and Installation
afety Information
S
Read carefully and thoroughly go through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
WARNING
:
Failure to comply with the instructions under this
sign may result in major physical injuries or death.
CAUTION
: Failure to comply with the instructions under this
sign may result in minor physical injuries or
damages to the product.
Install or store where it will not be exposed to temperature below freezing or exposed to the
weather (Rain/Water Splash/ Direct Sunlight).
If the product is exposed to such conditions, electric shock, fire, break down or deformation may occur.
•
Machine must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or
electric shock.
•
Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
CAUTION
PROPER
INSTALLATION
WARNING
3
•
Washer shall be placed in dry areas specifically during rainy season.
Humid conditions may cause rusting which may result in product failure.
•
Washer shall be placed in dry areas specifically during rainy season.
•
•
•
The base opening must not be obstructed by carpeting when the washing machine is installed on
a carpeted floor.
Disclaimer : The user should follow the instructions as per the owner’s manual to avoid
any malfunctioning of the product, accident or damage.
The manufacturer is not liable for any accident or consequential or resulting liability, damage
or loss to property or life arising directly or indirectly from the product. The manufacturer's
liability is limited only to the extent of repair or replacement of the product as per the terms and
condition mentioned elsewhere in the document.
afety Information
S
WARNING
• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical, etc.
Operating with such materials around the machine may trigger explosion or
fire.
• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Do not touch the Power Plug with a wet hand.
It will cause electric shock
4
Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
CAUTION
YOUR
LAUNDRY
AREA
• Do not put or keep any magnet near Lid of Washer, it will result in
Malfunctioning of the Product.
Children should be supervised to ensure that they
do not operate or play with the appliance. Inconstancy to this may damage machine,
serious injury and electrical shock.
for laundry
or Tub Wash.
WHEN USING
THE WASHER Do not use power plug, power socket outlet and wiring equipment for
more than their rated capacity.
afety Information
S
• Make sure that drainage is working properly.
If water is not drained properly, your floor may get flooded.
Flooded floors may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 second,
immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
• Disconnect the Washer from the household distribution panel by removing the Power
Plug from Power Socket outlet before attempting any maintenance or cleaning
Inconstancy to this may Cause electrical shock
WARNING
Never reach into the machine while it is running.
Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
5
CAUTION
WHEN USING
THE WASHER
Use of excessively hot water may cause damage to fabrics or cause
leakage of water.
Ensure No water logging near or below washer to prevent rusting.
Rusting on certain parts may result in product failure
Do not connect washer to hot water supply.
Turn off the water faucets to relieve pressure on hoses; they may need Replacement after
5 Years Inconstancy to this may rupture hose which leads to water Leakage.
Do not use wet cloth to clean the machine, Always use dry cotton cloth.
Using unclean power socket plug may cause fire.
Customer may Slip too.
Do not use washer for any other purpose other than its intended purpose.
- Use this appliance only for household purpose.
Do not use water hotter than 60°C.
WARNING
WHEN NOT
IN USE
roduct Features
P
3 Step washing
3 step washing makes the best washing performance with low tangling.
l
Normal logic control
A built-in load sensor automatically detects the laundry
load and a microprocessor optimizes washing conditions
such as ideal WATER LEVEL and washing time.
l
Advanced technology is built into the Electronic Control System which ensures the best washing result.
l
START
WASHING AUTO
POWER
OFF
SENSING
Laundry Sensor
Water Level Sensor
SETTING
Optimum
Washing
Condition
Rubbing Rubbing and
Shaking
Shaking and
Disentangling
+
Pre Wash Normal
l
The purpose of this program is to deliver best Wash Performance by adding extra 8 min of uniquely
designed washing pattern before the main wash cycle.
Washer doesn't operate while the lid is opened. If the lid is opened during the wash, rinse
or spin cycles, the operation stops for safety.
Smart Diagnosis
It is the technology to transmit the anomalies to the service center when there
is a problem with the washer. It provides the service that gives faith and trust
to the customers through precise and fast analysis.
l
Auto Restart
Auto Restart allows the program to restart all by itself in case of power failure. It resumes
from stage where it stopped, however, the wash cycle time may vary.
l
Product feature may vary according to different models. Refer page 31 for modelwise features for your purchased model.
*
Turbo Drum washing
When Washing Pulsator turn, the washing tub turns in the opposite direction.
This makes the both sides current of water which improve wash-performance by rubbing
clothes strongly.
l
6
WATER SUPPLY
HOSE
BLEACH
DISPENSER
FUNCTION
SELECTOR
TUB
BASE
ADJUSTABLE LEGS DRAIN HOSE
POWER PLUG
START/PAUSE
BUTTON
Use to start or
stop the washing
machine
temporarily.
Make sure the
water does not
leak.
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.
Keep the drain hose
flipped down while
washing is in progress.
Use to level the washing
machine for correct
balance & spin
operation.
MAGIC FILTER
Clean regularly to
stop linting on the
clothes load.
Body
POWDER
DETERGENT BOX
CASTORS
Use for easy
translocation
(at rear bottom edge)
Accessories
Water supply hoses Drain hose Anti-rat cover
Snap Ring
SOFTENER
INLET
Do not open
NOTE
“ ” Parts can be different according to the model.
Please do not match this figure with model as it may be different from your model .These are schematic diagrams only.
Due to continuous improvements at LG, specification of washing machine are subject to change without prior notice.
dentification of Parts
I
7
Casters
How to adjust leveling
Turn the adjustable legs to set the washer
horizontal (Both the front legs).
Install the washer on flat and firm surface.
1
Installation area
Adjustable leg
Improper installation of the washer may cause noise and malfunctioning.
1.
2.
3. Handle all packaging materials (such as plastic
bags and thermacol) to keep away from children.
The packaging materials can cause suffocation.
2
Checking level
The Basement is not flat, fill the water just touching the
Pulsator and see uniform distribution. If not, adjust the
legs as shown in the figure.
Top View
Press the corners of the machine diagonally
as shown in the figure, If any movement is observed,
adjust the legs for proper leveling.
3
Checking Proper placement
Anti-rat cover installation
Insert the Anti rat cover firmly from back side side of washing machine.
# Moving of the Machine
Note : * Be careful that you should not drop the machine.
* Never move the machine on casters when there is load inside.
Casters are provided for easy translocation of your machine
* Grip the machines properly as shown in fig.
* Tilt the machine towards your side at a angle
45 ~ 55 .
O O
The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
Install the washing machine on a level and firm
surface.
More than 10cm
More than 2cm
More than 2cm
Distance between drain hose and the wall
Distance between drain hose and the wall should be more
than 10cm, and the distance between the other part or the
rear part and the wall should be more than 2 cm. .
H
Don't add anything under back side legs.
lacing, Leveling and Installation
Note :
8
# Product feature may vary according to different models. Refer page 31 for model wise features for your purchased model.
Please do not match the figures with model as it may be different from your model. These are schematic diagrams only.
Be sure to remove the product from the carton base, otherwise the machine will not be able to operate
properly.
C
onnecting Water Supply Hose & Drain Hose
Rubber packing
Rubber packing
screw
Guide plate
Connector
Connector
Middle
Connector Middle
Connector
Water Supply Hose
Pressing rod Pressing handle
Connector
Middle
connector Pressing Handle
Pressing Rod
Water Supply Hose
Separate Middle connector from Water Supply Hose
Separate
Middle
connector from the
Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is
attached to the
Water
Supply Hose.
Loosen the fixed nuts to connect the connector to the tap
Untighten the
screw of the
connector so that the
tap can be placed in the middle.
Fixing Connectors to the Tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Fixing Upper Connector and Middle Connector
Remove the fixed sticker in between the
Upper
and Middle
Connectors. Tighten the
connectors
by holding one
connector and twist middle
connector to the right.
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the
Water Supply
Hose
which was
separated from middle
connector
(refer to Step1) and then join it to the middle
connector.
If the tap diameter is too large or is
square,
untighten the 4 screws
and remove the guide
plate. Then follow step1.
In case tap is too large.
NOTE
Normal Type
(Normal tap without thread & one touch type inlet hose.)
1
2
3
4
5
Check for water leakage
After connecting the
If the
connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
6
Water Supply Hose
other end of hose to machine open the tap to
check for any water leakage.
9
Drain Hose
Connecting the Drain Hose to Washer
The hose is placed
over a doorsill.
If Extension hose is used
should be less than 3m
Make sure that the
hose is not crushed.
Make sure that the hose is
not crushed between the
wall and the washer
Avoid submerging
the end of hose.
12
Insert the drain hose to the connect-
ing area at the body.
1.
2.
3.
The hose is clogged by
alien substances.
Less than 10cm
Press the hose clip.
While pressing, push the hose towards
the body.
Release the hose clip after pushing the
hose.
10
After connecting inlet hose to water faucets, turn on the water faucets to
flush out foreign substances (dirt, sand, or sawdust) in the water lines. Let
water drain into a bucket, and check the water condition.
For your safety and for extended product life, use only authorized components. The manufacturer is not responsible
for product malfunction or accidents caused by the use of separately purchased unauthorized parts.
Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with
the washer . LG does not recommend the use of aftermarket hoses.
Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.
Check to see if there is a rubber seal inside the connector.
Connect the water supply hose to inlet valve of the washing machine,
and then lock it by turning the hose connecting part.
Connecting Water Supply Hose to Washer
This manual suits for next models
6
Table of contents
Other LG Washer manuals
Popular Washer manuals by other brands
Tricity Bendix
Tricity Bendix AW 1000 W Operating & installation instructions
Panasonic
Panasonic NA-F60L5WRB operating instructions
GE
GE WSLP1500 Dimensions and installation information
Electrolux
Electrolux EWF1284EDW Service manual
Bosch
Bosch WAN2829BSN User manual and installation instructions
VESTEL
VESTEL CMH-XL 7510 TE user manual
