Leviton Load Center User manual
Leviton Load Center
First Time User Guide
Thank you for choosing the Leviton Load Center!
This First Time User Guide oers tips and support.
•
Order the covers separately; clear doors are a popular
option for indoor applications.
•
Each Load Center ships with a standard Panel Schedule. Window
Doors/Covers include an alternate Panel Schedule that is compatible
with the door design. Additionally, Panel Schedules for all Indoor panel
sizes and door types can be purchased in bulk packs, and are available
as a .PDF download on Leviton.com.
•
A temporary circuit directory is supplied on the Paint Shield (Figure 1).
•
Neutral wires must terminate at the circuit breaker for all smart
and safety breakers (AF, GF, EP, Dual). However, it is the preferred
method for all circuits.
•
For 2-pole breakers that are 60A or lower, the Neutral wire must be
installed in-between the two phase wires where the “N” is denoted
on the breaker (Figure 2). For 2-Pole breakers greater than 60A, the
Neutral wire must go to the Neutral bar (Figure 3).
•
All non-electronic 2-Pole breakers, as well as -G breakers operate at
both 120/240V and 120/208V.
•
A Leviton Surge Protective Breaker can be installed in any breaker
location to provide whole-panel surge protection, as well as visual
indication of protection status. It also provides overcurrent protection
for the spaces/circuits it inhabits.
Figure 1:
30 Space Paint Shield
Figure 2:
2-pole breaker with “N” denoted to
show where to install the neutral wire
> 60A
Load Power LOAD
Load
Neutral
Phase 1
Phase 2
Bonding
strap
Figure 3:
Neutral wire placement for 2-pole breakers greater than 60A.
Figure 4:
Bonding Strap
•
All panels 20-Space and larger come with 23 ground
terminals, factory installed. Each terminal is rated for
landing multiple wires per the panel label.
•
There are 6 pre-drilled areas for additional ground bars
on the back of the enclosure.
•
Utilize the bonding strap (Figure 4) for all service
entrance panels. DO NOT use the bonding strap
in a main lug only panel.
•
There is no need to remove the screw that bonds
the structure back to the enclosure.
•
NEC®2020 code 3-Wire vs 4-Wire 240V appliance Circuit
Grounding: Many 240V appliances have the Ground and
Neutral wires connected together in the appliance from the
factory. This only works for a 3-wire hook up with no ground
connection. When installing the appliance on a new install
with 3 wires and a ground, the grounds and neutrals must
be separated by removing the ground strap in the appliance.
If the ground strap is left installed, then GFCI breakers will
not reset.
If you have any questions, we’re here to help:
1-800-824-3005, Option 4.
GR-110922A-tp
Leviton Manufacturing Co., Inc.
Tech Line: 1-800-824-3005
Mon-Fri 8am-10pm EST, Saturday 9am-7pm EST, Sunday 9am-5pm EST
For 24/7 product support visit www.leviton.com/support
All trademarks are the property of their respective owners.
Visit our Website at: www.leviton.com
© 2023 Leviton Manufacturing Co., Inc. All rights reserved.
Table of contents
Other Leviton Circuit Breaker manuals
Leviton
Leviton LP420-CBW User manual
Leviton
Leviton LSPD1 User manual
Leviton
Leviton 16693 User manual
Leviton
Leviton 47605-ACN User manual
Leviton
Leviton LBHPL User manual
Leviton
Leviton LBHPL User manual
Leviton
Leviton GCA20 User manual
Leviton
Leviton 46596 User manual
Leviton
Leviton LB1XX-AF SERIES User manual
Leviton
Leviton LL630 User manual
Popular Circuit Breaker manuals by other brands
Siemens
Siemens Sentron 3VA9157-0PK1 Series operating instructions
hager
hager TS 303 User instruction
ETI
ETI EFI-4B Instructions for mounting
nader
nader NDM3EU-225 operating instructions
TERASAKI
TERASAKI NHP TemBreak PRO P160 Series installation instructions
Gladiator
Gladiator GCB150 Installation instruction
