LENCO L-78 USB - User manual

Unpacking

• Remove the record player and rubber mat from the packaging and remove all packing

material.

Setting up and preparing the device

• Place the device on an even and stable surface.

• Turn the white transport braces on the turntable

until you can remove them. Store them carefully.

• Place the rubber mat on the turntable so that the spindle on the turntable pokes through the

opening in the mat.

• Remove the protective cap from the pick-up system by pulling it downwards.

Connecting the device

Audio connection

The record player has an inbuilt preamplifier and can therefore be connected directly to the

Line In / Aux input on a hi-fi system.

• Connect the audio cable to the Line In / Aux input on your hi-fi system (red plug = right

channel; white plug = left channel).

USB port

You will find information on connecting the record player to a PC in the section "Converting

records to digital files".

Mains connection

• Connect the device by means of the mains plug to an easily accessible wall socket.

Repositioning the driving belt

Severe jolts (during transport, for example) may cause the record player’s driving belt to slip

off. To put it back into position, do as follows:

1. Remove the mains plug from the wall socket.

2. Take the rubber mat off the turntable.

3. Turn the turntable to the position illustrated.

4. Pull the driving belt out slightly and place it on the drive wheel as shown in the illustration.

Playing records

To achieve the best quality when playing or converting your records to digital files you should

observe the following information:

• Check the stylus regularly. You can brush off fluff and small bits of dirt with a soft brush,

brushing from the back to the front. For more stubborn dirt, add a little cleaning spirit to the

brush.

For information on how to change the stylus refer to "Changing the stylus".

• Secure the tone arm and turntable when transporting the device.

• The adapter must always be used when playing singles.

• Check the connection to your hi-fi system before playing a record.

• Clean your records with an antistatic cloth before playing them.

1. Lift the cover until it clicks into place.

2. Place the record on the turntable.

3. Set the required rpm by pressing the 33 or 45 button.

4. Remove the protective cap from the pick-up

system, if necessary, by pulling it downwards.

5. Push the tone arm locking lever to the right.

6. Press the LOWER RAISE button to raise the tone

arm.

7. Guide the tone arm across the record to the track you wish to play. The turntable starts to

turn.

8. Press the LOWER RAISE button to lower the tone arm. Playback begins. After the last track

on the record, the tone arm returns automatically to the tone arm rest. The turntable stops.

9. Push the tone arm locking lever to the left.

10. Close the cover.

Pausing playback

• Press the LOWER RAISE button to raise the tone arm and pause playback.

• Press the LOWER RAISE button again to lower the tone arm and continue

playing the record.

Stopping playback

• Press the STOP button to end playback. The tone arm automatically returns

to the tone arm rest. The turntable stops.

. Your record player can work together with all audio recording programmes that support

USB audio devices. The “Audacity” programme is included with the record player. This

programme is free of charge and distributed under the GNU General Public License (GPL).

• Information about enclosed software (Version 1.2.6) may be found in the (English)

programme help function and in the manual on the enclosed CD.

• Further information concerning software, new versions, manuals and a forum for users'

questions is available on the Internet at http://audacity.sourceforge.net.

• As "Audacity" is continuously updated, versions available on the Internet may differ not only

in appearance, but also in the menu structure and in individual functions.

System requirements

• Windows XP or Vista

• Pentium 300 MHz or higher (XP) or 1 GHz or higher (Vista)

• At least 128 MB RAM (XP) or at least 512 MB RAM (Vista)

• USB port

• 500 MB free memory on the hard disk (for programme and data)

• CD-ROM drive

• Sound card

Connecting to a PC

1. Connect the record player to an easily accessible wall socket by means of the mains plug.

2. Boot your PC.



3. Plug the square-shaped plug on the supplied USB

cable into the USB port on the back of the record

player.

4. Plug the rectangular plug on the cable into a USB

port on your PC.

Depending on the operating system, your com-

puter might display a message saying that the

record player has been recognised as a new

device and is available to use.

You can now install the enclosed software.

Installing software

1. Insert the enclosed CD in your CD-ROM drive.

2. Launch the software by double clicking on the “audacity-win-1.2.6.exe” file on

the CD.

Or: Under “Start”open the “Run” function and enter “D:\audacity-win-

1.2.6.exe”. The “D” is an example for the identification of your CD drive.

3. During installation, follow the instructions on the screen.

Basic settings

1. Launch "Audacity" by double clicking on the

programme icon.

EThe first time you launch "Audacity" you can select a language for the

programme interface.

EDepending on the version of the operating system and your PC's configu-

ration, devices might be identified differently on your PC.

2. Select "Preferences..." in the "Edit" menu. The

"Audacity Preferences" window appears.

3. Make the following settings in this window:

Under "Audio I/O"

"Playback" / "Device":

Here you need to select your sound card, e.g. "Speaker (Realtek)".

"Recording" / "Device":

"Microphone (USB Audio CODEC)“; this selects the record player as the input

device.

"Recording" / "Channels":

"2 (Stereo)"; to obtain stereo recordings.

"Software Playthrough (Play new track while recording it)":

must be activated (insert tick) to enable you to listen in during the recording.

E"USB Audio CODEC" only appears as a setting option when the record

player is connected to the PC.

Under "Quality"

"Default Sample Rate“:

"44100 Hz"; the sample frequency used for CDs.

"Default Sample Format":

"16 bit"; the sample format used for CDs.

Under "File Formats“

"Uncompressed Export Format“:

"WAV (Microsoft 16bit PCM)"; the format with which audio CDs can be created

later.

4. Click on "OK" to save the settings.

Listening to Monitor input via PC speakers

5. In the main Audacity window you will find a micro-

phone icon beneath the output level indicators and

next to it a button with a black arrow pointing down-

wards.

Click on the arrow and select "Monitor input“ in the

dropdown menu.

Green or red bars appear in the display above.

You can now start recording.

Recording

1. Lift the cover until it clicks into place.

2. Place the record on the turntable.

3. Set the required rpm by pressing the 33 or 45 button.

4. Remove the protective cap, if necessary, by pulling it downwards from the

pick-up system.

5. Push the tone arm locking lever to the right.

6. Press the LOWER RAISE button to raise the tone arm.

7. Guide the tone arm across the record to the track you wish to record. The

turntable starts to turn.

8. Click on the record button. The recording begins.

9. Press the LOWER RAISE button to lower the

tone arm. Playback begins.

The waveform of the recording is displayed on the screen. You can also listen

ECheck the system settings if you are unable to record despite making the

correct settings under Audacity:

For Windows XP the record player ("USB Audio CODEC") must be

selected in the "Control Panel" under "Sounds and Audio Devices" /

"Voice" /"Voice recording".

Your sound card must be selected under "Sounds and Audio Devices" /

"Voices" / "Voice playback" (not: "USB Audio Codec").

The same settings must be selected under "Sounds and Audio Devices" /

"Audio" / "Sound recording" or "Sound playback".

For Windows Vista the record player ("Microphone USB Audio Codec“)

must be selected in the "Control Panel“ under "Hardware and Sounds“ /

"Sound“ / "Recording".

Your sound card must be selected under "Hardware and Sounds" /

"Sound" / "Playback" (not: "USB Audio Codec").

You will find further information about the "Control Panel" in the Help

for your operating system.

EYou must select the setting "Monitor input“ each time you record. The

other settings are stored, although they may be lost when you disconnect

the record player from the PC.

to the recording over headphones, speakers or your hi-fi system, depending on

the setting.

10. Click on the stop button. The recording ends.

11. Select "Save project" in the "File" menu. The "Save Project As" window

appears.

12. Select a storage location, enter a file name and click on "Save" to store the

project file.

13. Press the STOP button on the record player, if necessary, to end the playback.

The tone arm automatically returns to the tone arm rest. The turntable stops.

14. Push the tone arm locking lever to the left.

15. Close the cover.

EThe project file can only be read by Audacity. For further editing or play-

back with another programme the recordings need to be converted (see

"Exporting tracks").

EIf the recording is not displayed or you cannot hear it, check the cable

connections and settings. You will find some hints under "Fault/Remedy“.

Listening to a recording

• Click on the playback button to play back the

recording. The playback is controlled via the

buttons in the menu bar.

Editing an audio signal (optional)

When records are converted to digital files a certain amount of background noise

is also digitalised, e.g. the crackling and hiss of older records in particular. Auda-

city helps reduce these background noises.

Removing noise

1. Mark with the cursor an area in your recording in

which there is no music but only background

noise heard. Areas between the tracks of a long

playing record are especially suitable for this.

2. Select "Noise removal..." in the "Effect" menu. The "Noise Removal" window

appears.

3. Click on "Get noise profile". The window closes

and Audacity creates a noise profile with the

background noises that are to be removed.

EIn the "Effect" menu you will find a series of functions with which you can

edit your recordings. This allows you to change the volume ("Amplify"),

balance deviations in volume ("Normalize...") or fade recordings in or out

("Fade In" or "Fade Out"). You will find further information about the indi-

vidual effects in Help in Audacity or at http://audacity.sourceforge.net.

4. Mark with the cursor the part of the recording that

is to be edited, or select "All" under "Select..." in the

"Edit" menu.

5. Select "Noise Removal..." again in the "Effect" menu. The "Noise Removal"

window appears.

6. Use the slider to set the strength of the effect.

7. Click on "Preview“ to check the effect.

Attention: Only use Effect with great care, other-

wise parts of the recording will also be erased

with the noise.

8. Click on "Remove Noise". The window closes and Audacity removes the noise.

This may take several minutes, depending on the length of the recording.

Removing clicks

1. Mark with the cursor the part of the recording

that is to be edited, or select "All" under

"Select..." in the "Edit" menu.

2. Select "Click Removal..." in the "Effect" menu. The "Click and Pop Removal"

window appears.

Other manuals for L-78 USB -

This manual suits for next models

Table of contents

Popular Turntable manuals by other brands

Gemini

Gemini CDT-05 MKII product manual

Rotel

Rotel RP-820 owner's manual

Shuman

Shuman MC-250BT user manual

Stanton

Stanton STR8-150 owner's manual

Audio Technica

Audio Technica AT-LPW40WN user manual

Crosley

Crosley McQueen CR7011-GY instruction manual

Reloop

Reloop SMP-1 Operation manual

auna

auna TT-Classic Plus instruction manual

COMO AUDIO

COMO AUDIO Turntable Analog user manual

Dual

Dual 1009 F owner's manual

REED

REED Muse3C user manual

AXIOMTEK

AXIOMTEK OPS883-H Series Quick installation guide

Pioneer

Pioneer PL-71 operating instructions

Vestax

Vestax PDX-a1 owner's manual

Denon

Denon DP-400 owner's manual

Dual

Dual 504 Service manual

Audio-Techica

Audio-Techica AT-LP60XBT user manual

Goldring

Goldring G99 instruction manual