LENCO L-3818 User manual
1
Model: L-3809 / L-3818
User manual - Direct drive turntable with USB recording
Gebruikshandleiding - Direct aangedreven platenspeler met USB-opnamefunctie
Bedienungsanleitung - Direktangetriebener Plattenspieler mit USB-Aufzeichnung
Guide d’utilisation - Platine tourne-disque à entraînement direct avec
enregistrement USB
Manual de usuario - Unidad de tocadiscos directa con grabación USB
Manuale dell'utente - Giradischi a trazione diretta con registrazione USB
Руководство пользователя - Виниловый проигрыватель с прямым приводом и
функцией записи через USB
2
English........................................................................................................................................ 3
Nederlands .............................................................................................................................. 17
Deutsch.................................................................................................................................... 35
Français.................................................................................................................................... 52
Español .................................................................................................................................... 69
Italiano..................................................................................................................................... 86
Русский.................................................................................................................................. 102
Version: 4.0
INDEX
3
English
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave
5cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
other heat-generating products or naked flame. The device can only be used in moderate
climates. Extremely cold or warm environments should be avoided. Working temperature
between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file transmission, please handle
with care and operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High
voltage flows through the product and inserting an object can cause electric shock and/or
short circuit internal parts. For the same reason, do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming
pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects
filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm wet
room with damp, water droplets or condensation may occur inside the unit and the unit
may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning
on the power: the unit should be dry before getting any power.
10. Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power socket immediately.
11. This device must operate on a power source as specified on the specification label. If you
are not sure of the type of power supply used in your home, consult your dealer or local
power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To
remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files.
Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the unit
directly. Don’t use an USB extension cable because it can cause interference resulting in
failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory or
mental disabilities, or a lack of experience and knowledge, unless they’re under supervision
or have received instructions about the correct use of the device by the person who is
responsible for their safety.
19. This product is intended for non-professional use only and not for commercial or industrial
use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in
an unstable position vibrations or shocks or by failure to follow any other warning or
precaution contained within this user manual will not be covered by warranty.
21. Never remove the casing of this device.
4
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way, such as the power supply cord or the plug, when liquid has been
spilled or objects have fallen into the device, when the device has been exposed to rain or
moisture, does not operate normally, or has been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
⚫ If any trouble occurs, disconnect the AC power cord and refer servicing to qualified
personnel.
⚫ Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs
and the cable’s exit point. Do not place heavy items on the power adaptor, which may
damage it. Keep the entire device out of children’s reach! When playing with the power
cable, they can seriously injure themselves.
⚫ Unplug this device during lightning storms or when unused for a long period.
⚫ The socket outlet must be installed near the equipment and must be easily accessible.
⚫ Do not overload ac outlets or extension cords. Overloading can cause fire or electric
shock.
⚫ Devices with class 1 construction should be connected to a main socket outlet with a
protective earthed connection.
⚫ Devices with class 2 construction do not require a earthed connection.
⚫ Always hold the plug when pulling it out of the main supply socket. Do not pull the
power cord. This can cause a short circuit.
⚫ Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire
or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫ [The remote control supplied with] This product contains a coin/button cell battery. If
the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead
to death.
⚫ Keep new and used batteries away from children.
⚫ If the battery compartment does not close securely, stop using the product and keep it
away from children.
⚫ If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
29. Caution about the use of Batteries:
⚫ Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
⚫ Battery cannot be subjected to high or low extreme temperatures, low air pressure at
high altitude during use, storage or transportation.
⚫ Replacement of a battery with an incorrect type that can result in an explosion or the
leakage of flammable liquid or gas.
⚫ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery that can result in an explosion.
⚫ Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or that leakage of flammable liquid or gas.
⚫ A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
⚫ Attention should be drawn to the environmental aspects of battery disposal.
5
Deliver Content
1 x Manual
1 x RCA audio cable
1 x Power cord
6
1 x USB connection cable
1 x Platter
1x Felt mat
7
Description
1. TURNTABLE PLATTER
The platter is equipped with a feltmat. This makes it easier to manipulate the record for scratch
performance. Place vinyl records centered on the turntable platter.
2. COUNTERWEIGHT
Adjustment creates the proper downward pressure of the stylus to the record. Attach now by
sliding the counterweight onto the rear of the tone arm.
3. STYLUS PRESSURE ADJUSTMENT SCALE
Adjust stylus cartridge’s pressure alignment.
4. ANTISKATING KNOB
This applies inward force to the tone arm so it doesn’t skip outward across the record due to
the centrifugal force of the record spinning.
5. TONEARM LIFTER
Control the up and down action of the tonearm.
6. HEADSHELL
Install cartridge here. During installation, attach the stylus protector to guard the stylus tip
from damage.
8
Attach wires as follows:
White (L+)
Left channel +
Blue (L-)
Left channel –
Red (R+)
Right channel +
Green (R-)
Right channel –
7. PLAY/PAUSE BUTTON
Press this button to start playback or to resume playback after a pause.
8. PLATTER SPEED BUTTONS
Select 33 or 45 RPM platter speed. 78 RPM is selected by pressing both the 33 and 45 buttons
simultaneously; both buttons should be illuminated.
9. Headshell locking nut
Attach the head shell by inserting it into the front end of the tone arm and then turn the locking
nut clockwise.
10. Pitch fader
Used to change the playback speed of the playing trace.
11. Power switch / Stroboscopic light
Turn the switch clockwise to turn on the unit. Turn the switch counter-clockwise to turn off
the unit. The stroboscopic light will automatically turn on when the unit is on.
9
1. RCA OUTPUT
OUTPUT L and R are used for connecting the turntable to the RCA analog input on your
amplifier.
2. LINE/PHONO SWITCH
The turntable has a built-in PHONO pre-amplifier that is disengaged if you have an external
pre-amplifier. If you want to use the signals amplified by the internal amplifier of the turntable,
move the switch to LINE. If you want to use an external PHONO preamplifier, move the switch
to PHONO.
With the PRE-AMP switch at ON never connect to a Phono input.
Audio will be strongly distorted then and there is a risk that Amplifier and/or
speakers will be damaged.
3. USB PORT
The sound of your vinyl record is converted to digital with a maximum resolution of 48KHz /
16bits. Use the USB cable that came with the device to connect the turntable to your computer.
The Audacity software should be downloaded
4. AC IN
Plug the power cord here.
5. POWER ON/OFF
Use to turn the turntable on and off.
10
Turntable Assembly:
1. Removing from carton:
Carefully remove the main unit with the packing material intact from the box. Remove the
packing material once the unit has been removed from the shipping carton. Be sure to locate
all the accessories located in the packing material.
2. 45rpm Adapter:
Locate and remove the 45-rpm adapter from the packing material and place it in the 45 adapter
cutout on the top of the main unit.
3. Turntable Platter:
Remove the turntable platter from the packing material and gently place the platter onto the
CENTER SPINDLE of the turntable base.
4. Feltmat:
Remove the black feltmat from the packaging and place it on the PLATTER.
5. Headshell:
Insert the HEADSHELL into the front end of the TONEARM ASSEMBLY. While holding HEADSHELL
firmly into the front end of the tonearm assembly, turn the HEADSHELL LOCKING NUT counter-
clockwise to firmly secure the HEADSHELL to TONEARM ASSEMBLY.
6. Counterweight:
Locate and remove the tonearm COUNTERWEIGHT from the packaging. Slide COUNTERWEIGHT
onto the rear of the TONEARM ASSEMBLY. Turn it lightly and it will screw onto the rear shaft of
the tonearm.
This manual suits for next models
3
Table of contents
Languages:
Other LENCO Turntable manuals
LENCO
LENCO LS-300 User manual
LENCO
LENCO LS-500 User manual
LENCO
LENCO L-85 User manual
LENCO
LENCO LS-430 User manual
LENCO
LENCO Classic Phono User manual
LENCO
LENCO Classic Phono TCD-2570WD User manual
LENCO
LENCO L-3807 User manual
LENCO
LENCO TCD-990 User manual
LENCO
LENCO L-80 USB - User manual
LENCO
LENCO LS-100WD User manual
LENCO
LENCO LS-50LED User manual
LENCO
LENCO Classic Phono TT-41 User manual
LENCO
LENCO L-3866 USB User manual
LENCO
LENCO LS-10WD User manual
LENCO
LENCO L-83 User manual
LENCO
LENCO LS-5000K User manual
LENCO
LENCO Classic Phono TCD-2550 User manual
LENCO
LENCO DJ-1000 User manual
LENCO
LENCO L-3866 USB User manual
LENCO
LENCO LS-480WD User manual
