LENCO DIR-261 User manual
1
Model: DIR-260/DIR-261
USER MANUAL
Internet, DAB+/FM radio with CD player
and Bluetooth
HANDLEIDING
Internet, DAB+/FM-radio met cd-speler
en Bluetooth
BEDIENUNGSANLEITUNG
Internet/DAB+/FM-Radio mit CD-Player
und Bluetooth
MODE D’EMPLOI
Radio Internet DAB+/FM avec lecteur
CD et Bluetooth
MANUAL DEL USUARIO
Radio DAB+/FM con Internet y con
reproductor de CD y Bluetooth
MANUALE D'USO
Internet, radio DAB+/FM con lettore CD
e Bluetooth
2
Index:
English........................................................................................................................................ 3
Nederlands .............................................................................................................................. 36
Deutsch.................................................................................................................................... 80
Français.................................................................................................................................. 128
Español .................................................................................................................................. 173
Italiano................................................................................................................................... 218
Version: 5.0
3
English
DIR-260/DIR-261
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave
5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
other heat-generating products or naked flame. The device can only be used in moderate
climates. Extremely cold or warm environments should be avoided. Working temperature
between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file transmission, please handle
with care and operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High
voltage flows through the product and inserting an object can cause electric shock and/or
short circuit internal parts. For the same reason, do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming
pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects
filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm wet
room with damp, water droplets or condensation may occur inside the unit and the unit
may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning
on the power: the unit should be dry before getting any power.
10. Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power socket immediately.
11. This device must operate on a power source as specified on the specification label. If you
are not sure of the type of power supply used in your home, consult your dealer or local
power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files.
Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the unit
directly. Don’t use an USB extension cable because it can cause interference resulting in
failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory or
mental disabilities, or a lack of experience and knowledge, unless they’re under supervision
or have received instructions about the correct use of the device by the person who is
responsible for their safety.
19. This product is intended for non professional use only and not for commercial or industrial
use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in
an unstable position vibrations or shocks or by failure to follow any other warning or
precaution contained within this user manual will not be covered by warranty.
4
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way, such as the power supply cord or the plug, when liquid has been
spilled or objects have fallen into the device, when the device has been exposed to rain or
moisture, does not operate normally, or has been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
⚫If any trouble occur, disconnect the AC power cord and refer servicing to qualified
personnel.
⚫Don’t step on or pinch the power adaptor. Be very careful, particularly near the
plugs and the cable’s exit point. Do not place heavy items on the power adaptor,
which may damage it. Keep the entire device out of children’s reach! When
playing with the power cable, they can seriously injure themselves.
⚫Unplug this device during lightning storms or when unused for a long period.
⚫The socket outlet must be installed near the equipment and must be easily accessible.
⚫Do not overload ac outlets or extension cords. Overloading can cause fire or electric
shock.
⚫Devices with class 1 construction should be connected to a main socket outlet with a
protective earthed connection.
⚫Devices with class 2 construction do not require a earthed connection.
⚫Always hold the plug when pulling it out of the main supply socket. Do not pull the
power cord. This can cause a short circuit.
⚫Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire
or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
⚫“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫[The remote control supplied with] This product contains a coin/button cell
battery. If the battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
⚫Keep new and used batteries away from children.
⚫If the battery compartment does not close securely, stop using the product and
keep it away from children.
⚫If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
29. Caution about the use of Batteries:
⚫Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
⚫Battery cannot be subjected to high or low extreme temperatures, low air
pressure at high altitude during use, storage or transportation.
⚫Replacement of a battery with an incorrect type that can result in an explosion or
the leakage of flammable liquid or gas.
⚫Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion.
⚫Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or that leakage of flammable liquid or gas.
⚫A battery subjected to extremely low air pressure that may result in an explosion
or the leakage of flammable liquid or gas.
⚫Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
5
* Those instruction are related only to products using power cable or AC power adaptor.
Accessories:
User manual
Power adaptor
Remote control
6
1. Driver
8. Scan/Play/pause Button
2. Remote Control Receiver
9. CD Eject Button
3. CD Passages
10. Next Button
4. Volume/Standby/Mode knob
11. Stop/OK/pair/navigate knob
5. Menu Button
12. LCD Display (TFT 2.8’’)
6. Back/Prev Button
13. Driver
7. Preset Button
14. Inverter tube
15. Telescopic antenna
16. Earphone jack
17. Aux jack
18. DC in jack (12V/2.5A)
19. Inverter tube
7
1. Standby button
12. Equalizer settings
2. Switch speaker ON/OFF
13. Up cursor button
3. Menu-Main menu and Info
14. Left cursor button
4. Preset-saved stations, Favorites, etc
15. OK Confirm selection
5. Scan-DAB/FM scan
16. Right Cursor button
6. Eject button
17. Down cursor button
7. Go back one track
18. V- Decrease volume
8. Play/Pause
19. V+ Increase volume
9. Go forward one track
20. 0.....9 Call up favorites/Memory; input
letters and numbers
10. Stop play button
21. Prog for CD
11. Mode button
22. Rep. for CD
Battery installation for remote control:
1. Push on the ‘open’ marking of the battery cover and slide it downwards
2. Install two (2) x AAA size batteries into the battery compartment (check the correct
polarity)
3. slide the battery cover back
8
Battery Precautions:
Follow these precautions:
1. Use only the type of battery specified in this manual.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A battery which is inserted in the wrong way may cause damage
to the device.
3. Do not try to recharge single use batteries. (Follow the battery manufacturer’s
directions.)
4. Do not throw batteries into fire because they may explode.
5. Clean the battery contacts of the device prior to replacing empty batteries.
First use
1. Plug the Adapter into the wall outlet, the display will appear as below.
2. Wait for about 20 seconds, the display will appear as below. Turn the NAVIGATE knob on the
unit counterclockwise or press the navigate button on remote control to highlight "YES", and
press the OK knob on the unit or press the OK button on remote control to continue.
9
3. The display will appear as below. Turn the NAVIGATE knob on the unit or press the
navigation buttons on the remote control to highlight the desired hour format, then
press the OK knob on the unit or press the OK button on remote control to continue.
4. The date and time update page will appear as below.
Explanation of the options:
Update from DAB: The time and date will be synchronized from a DAB signal
Update from FM: The time and date will be synchronized from a FM signal
Update from Network: The time will be synchronized from the Internet/network signal
No update: Time and date have to be set manually
Turn the NAVIGATE knob on the unit or use the navigate buttons on the remote control to
highlight your selection and press OK to confirm your selection
10
If ‘No update’ is selected:
Set the date and time manually.
The day number will flash, Turn the NAVIGATE knob on the unit or use the navigate buttons
on the remote control to set the desired day, then press the ‘OK’ button on the unit or the
remote control to confirm. Now the month number will flash. Use the same procedure as
setting the day, then do the same to set the year and time. Go ahead to next setup page.
5. The Network settings page will appear as below. Turn the NAVIGATE knob on the unit or
use the navigation buttons on the remote control to select ‘YES’ or ‘NO’.
Press the “OK” knob on the unit or remote control to continue.
6. The screen will be as below. On the SSID page, choose one of the wireless networks
from the list or choose one of the network with the prefix [WPS]…
This manual suits for next models
2
Table of contents
Languages:
Other LENCO Radio manuals
LENCO
LENCO DIR-110BK User manual
LENCO
LENCO DAR-060 User manual
LENCO
LENCO IPD-9000 DAB+ User manual
LENCO
LENCO DIR-140 User manual
LENCO
LENCO SCD-971 User manual
LENCO
LENCO NR-001 User manual
LENCO
LENCO DIR-165 User manual
LENCO
LENCO DIR-170WA User manual
LENCO
LENCO DIR-141 User manual
LENCO
LENCO CR-2850 User manual
